Page is loading ...
ICStation Bluetooth Receiver Board
2x5W Stereo Audio Amplifier
(ASIN:B0796TJ9FT)
http://www.amazon.com/dp/B0796TJ9FT
I C S T A T I O N
www.amazon.com/shops/icstation icsta[email protected]
Function
【Updated BT 5.2】
Mini Bluetooth audio receiver board updates to Bluetooth 5.2 version, which is
compatible with most mobile phones and Bluetooth adapters. The maximum
transmission distance is about 15 meters.
【Low Standby Consumption】
Ultra low power consumption when it is in standby mode. After 10 minutes standby,
the board will automatically shut-down. Also it will automatically reconnect after
power cycling the unit.
【USB port】
The on-board USB interface can not only be used to USB sound card but also charge
the lithium battery and also used as a 5V power supply port.
Parameters
Working Voltage
DC 3.7V-5V
Working Current
2A Max (Better sound quality when you use 5V 2A)
Bluetooth Version
BT 5.2
Transmission Distance
15 meters
Channel
2-Stereo
Output
5W+5W
Dimension
40*20*12mm (L*W*H)
Compatible Speakers
2-8 ohm and 3-10W
(3ohm&5W or 4 ohm&10W are recommended)
You need a charge protection board
You need a charging protection board when making a
wireless speaker. Recommend to use with the
Icstation TP4056 Micro USB 5V 1A Charging Board
(ASIN: B01LHD9D7E)
This protection board is sold separately.
www.amazon.com/shops/icstation icsta[email protected]
Package list
Amplifier board + 3 wires (Power wire*1 Speakers wires*2)
If there is any missing cable when you receive it, PLEASE CONTACT US ASAP. We
provide FREE REPLACEMENT ITEM.
Wiring
How to use
1) Open the Bluetooth function of your cell phone or
other devices with Bluetooth function(such as
laptops, tablet PCs, etc.). Please delete other
Bluetooth devices that paired before from your
phone in case the Bluetooth connection is unstable.
2) The phone will automatically search and pair with
the module named “DW-CT14+”, no pairing code or
button needed.
3) The LED of the module starts to flash after
Bluetooth connection.
4) It will automatically connect to already paired
device and automatically shut down after 10
minutes in standby mode.
www.amazon.com/shops/icstation icsta[email protected]
Attention
► The Bluetooth audio receiver board already has dual 5W power amplifier circuit.
It doesn’t need to connect with extra power amplifier. The output of dual
amplifiers can not be connected in parallel or connected to the negative
electrode, otherwise the power amplifier chip will be damaged.
► For your safety, be sure to use a regular lithium-ion battery with charging
protection.
► Please use a stable power supply such as 3.7V-5V lithium battery or 5V power
adapter. Do not use disposable batteries, power bank, multi-function
transformers and other power supply with unstable voltage and current.
► The antenna should be far away from metal materials so as not to affect the
transmission distance.
Any Questions?
Any questions please write to our service team with your order ID.
/
