Legrand IS-LC2354_REV.A Installation guide
- Type
- Installation guide
IS-0494 Rev A
Serial Port #1 on the
Integration Module must be
used for connection to the
MR232-G Network Controller.
Serial Port #1 on the
Integration Module must be
used for connection to the
MR232-G Network Controller.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.legrand.us/onq
© Copyright 2010 by Legrand
A
ll Rights Reserved
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.legrand.us/onq
© Copyright 2010 by Legrand
A
ll Rights Reserved
RJ45 to DB9 Adapter for MR232-G to Unity
RJ45 to DB9 Adapter for MR232-G to Unity
IS-0494 Rev A
Doc. #IS-0494 Rev A
Doc. #IS-0494 Rev A
NOTE: This RJ45 to DB9 adapter is pinned
specifically for connection between the
MR232-G Network Controller and a Unity
System Integration Module (see diagram on
other side).
NOTE: This RJ45 to DB9 adapter is pinned
specifically for connection between the
MR232-G Network Controller and a Unity
System Integration Module (see diagram on
other side).
-
1
-
2
Legrand IS-LC2354_REV.A Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand Video Door Internet Enabling Kit - CM2001 User guide
-
-
Legrand RS232 to RF Interface Installation guide
-
-
-
-
-
-
-
Legrand HA7424 User guide
