1.25>132
28-1/4”
2-3/4”
3”
32” WOOD BASE/CERAMIC BASE 51-3/8” WOOD BASE/CERAMIC BASE
4”
2-3/8”
24”
36”
72”
10-3/4”
3/4”
19”
42”
13”
77” x 47” WOOD TOWEL BAR
3”
4” 4”
13”
4”
2-3/8”
1-1/2” I.P.S. THR’D.
1-1/2” O.D.
Roughing-In
K-700
VINTAGE
FREE STANDING BATH WITH FITTINGS
Ordering Information
Accessories/hardware:
Drain K-7159 required*
Antique faucet K-104 required*
Adjustable legs K-1172 required*
Riser tubes K-128 required*
Brass brackets/end caps K-708 required*
Wood base OR
Ceramic base
K-705
K-709
required*
required*
Wood towel bar K-707 required*
* Required for configuration illustrated.
Product Information
Fixture*: basin area top area weight
Bathing well 44” x 24” 60” x 32” 485 lbs.
water depth capacity
* Approximate measurements for comparison only.
Installation Notes
Refer to installation instructions included with fixture before
beginning installation.
NOTICE: The floor must support 2,000 pounds. This is the
combined weight of the bath, water, and two bathers. Pre–
plan access for moving the bath into the construction area;
the bath is heavy and will not fit easily through doorways.
Roughing-In Notes
Fixture dimensions are nominal and conform to toler-
ances in ANSI Standard A112.19.1.
No change in measurements if connected with drain il-
lustrated.
K-700 Vintage Bath
106539-1-BA (A)
