Smart Watch Plus
User Guide
Please read the manual before use.
2
Disclaimer
CO-PILOT has made every effort to ensure that all the information
contained in this manual is accurate and reliable. However, the
information is subject to change without notice.
CO-PILOT assumes no responsibility for any damage or injury resulting
from the use of this product.
No part of this publication may be copied, distributed, transmitted or
transcribed without the permission of CO-PILOT.
Warranty and Registration
Your CO-PILOT device is guaranteed for one year from the date of
purchase from all manufacturing defects that occur with normal use. If
your unit fails to perform as specified in this user guide please contact
your retailer or ourselves with regards to your warranty. To activate the
12 month warranty please visit www.copilotmobile.co.uk.
3
1. Safety Warning
◆ The information in this document won’t be modified or extended in
accordance with any notice.
◆ The watch should be charging 2 hours at least before use
◆ The original code is 1122. This code can prevent your watch in use by
others without your permission.
◆ Please change the original code to insure your personal information
safe.
2. Product details:
2.1. Product details
Power button: Long press to power On/Off; Short press to awake/dark
screen/ back to main menu
USB port: Charging/Data:
Touch screen: each function will be shown and displayed on the touch
screen.
2.2. Screen
You can enter into next page by sliding screen to the left, and return to last
page by sliding screen right; It is will be in mistake for a click if the drag
distance too short.
2.3. Clock Display (the following picture is for reference only,
goods in kind prevail)
4
Setting method:
Method 1: Power on, when the phone is in clock mode, please click middle
screen and set different clock interfaces to your preference.
Method 2: Power on, Main menu: setting—phone setting—standby menu
display—unlock selection, choose the clock mode to your preference.
3. Product quick use
3.1. Download the Sync software.
Scan QR code, down load the APP which can match your phone,
This APP is only for the Sync between watch and phone, will not
take your phone GPRS.
If you already download the related software, please check the
version and use the newest related in order to ensure all functions
run normally. Please update the software when it has a new
version.
3.2. Install and use the Sync software
Android Application installation:
Please install the android application in your smart phone, you can
store it into your phone memory or install by Sync assistant.
Android application usage (already installed)
5
(Smart phone) Setting—Accessibility—Enter into Bluetooth
notice (service), enable this service. The application runs on the
background automatically and sync function will be switched on
as below:
Click the Bluetooth notices and choose the Notification service,
select your Personal or System application in Notify application.
Telephone service is including SMS, incoming call and seek
watch.
Notice:
Please don’t shut the Bluetooth notify service when you are
clearing software or closing background application software. It
will affect the Sync function between watch and phone.
3.3. Bluetooth Connection and Sync function
3.3.1. From phone to watch
Phone setting—turn on Bluetooth—search for devices, please
click pair devices when found W90 and also choose “yes” in your
mobile phone which will than pair the two devices.
6
Please choose “sure” when there is a phone book request.
Meanwhile you’d better choose “no remind again”, this is
convenience when you connect next time (without remind again).
Notice: the Sync software can open in sync APP already installed
and Accessibility, the mobile will show Bluetooth connected after
2-5 min; the watch will inform you the time of Sync with your
phone. The message will sync to your watch when it is incoming
to your mobile.
3.3.2. From watch to phone
BT dialer on Smart watch ---Search new device—found your smart watch
(such as s9500)—connect. The processes of next are same with 3.3.1
3.4 Base function
3.4.1 Message
Sync phone or watch message.
3.4.2 Bluetooth
Sets the Bluetooth status, turn on/off.
3.4.3 Calls records
You can check your phone call records after you connect with the
Bluetooth.
Shown all records including miss call, dialed calls and receive call; you
can check the date, time and phone number of the miss call after you
choose it. But only can call this number.
3.4.4 BT dialer
Paired devices from smart watch
3.4.5 Remote notifier (Only for Android users)
When there is SMS, incoming messages from QQ and other applications
7
on the connected phone, the watch will alert you to read them.
3.4.6 Remote cameras
Smart watch camera can control smart phone camera.
3.4.7 Anti lost
Watch seek phone, or phone seek watch.
3.4.8 Setting
Notice: sets clock display and theme in phone setting. In the security
settings. The safe code is 1122.
3.4.9 Pedometer
It can be adopted as a tool to avoid insufficient or excessive exercise by
measuring calories consumption based on collected data, such as number
of steps, distance, speed time, etc. to control exercise.
If you want return to main menu but keep pedometer during the exercise.
Please press the power button.
3.4.10 Sleep monitor
Show your sleep quality based on your sleep times.
3.4.11 Sedentary remind
You can set a time to remind you to exercise
3.4.12 Quick response
It can download the sync software when you scan the quick response, if
there is a new version you need to update.
3.4.13Alarm
3.4.14 Calendar
3.4.15 Calculator
3.4.16 Profiles
3.4.17 File manager
8
3.4.18 Audio player
Can play music from your smart phone after connected via Bluetooth.
3.4.19 Camera
3.4.20 pictures
3.4.21Recorder
3.4.22 QQ: Need to insert SIM card first and SIM card have GPRS.
3.4.23 Browser
When your phone has SIM card you can use the Internet.
4. Notice
Main menu: Theme setting, choose the theme of your preference.
4.1. Full charge before use, the charge time needs to be 2 hours.
4.2. Use the accessories cable and charger.
4.3. Bluetooth will disconnect when you have exceeded the
distance, after switch on the Anti-lost. The smart search function can’t
be used before you have reconnected with Bluetooth.
4.4. Please reconnect with Bluetooth if it’s disconnected repeatedly
(please manual connect if the Bluetooth is disconnected for over 5
minutes).
4.5. When playing music, some of music’s name can be shown and
some can’t, it is normal.
5. Common trouble shooting
Please refer below key functions for any problems with the watch, if the
problem is still unsolved, please contact us.
5.1. Unable to switch on
9
Hold power button for more than 3 seconds
Low power, please charge it.
5.2. Shut down automatically
Low power, please charge it.
5.3. Using time too short.
Battery is not full, please make sure it is full power (full charge need
2hours at least).
During the use of SIM card, the power will not last as long if the signal
too poor.
5.4. Unable to charge.
Charging cable may need to be replaced
Please check the USB slot is connected properly
5.5. No caller’s name when incoming call
Upload the phone book when connected with Bluetooth.
Forgot to sync the phone book when reconnected, please pair the device
and connect Bluetooth again.
5.6. Bad phone call voice
Watch and phone are separated too far, please be closer;
Co Pilot contact details:
Address: In Phase International Ltd, 3A Rani Drive, Nottingham,
Nottinghamshire, NG5 1RF
Phone: 0330 123 9040
Web: www.copilotmobile.com
Email: contact@copilotmobile.co.uk
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
