Insinger 45SA5 Features

Type
Features

This manual is also suitable for

Insinger 45SA5 is an undercounter scullery machine that washes 45 racks per hour. It has a 9.0-gallon wash tank capacity and a 1/2 hp 440/3/60 TEFC wash pump. The machine comes with standard features such as detergent and rinse additive, electric or steam heat, capillary thermometers for wash and rinse, automatic tank fill, S/S frame, pressure reduction valve and line strainer, manual tank fill, low water protection, and stainless steel level gauges connection provisions.

Insinger 45SA5 is an undercounter scullery machine that washes 45 racks per hour. It has a 9.0-gallon wash tank capacity and a 1/2 hp 440/3/60 TEFC wash pump. The machine comes with standard features such as detergent and rinse additive, electric or steam heat, capillary thermometers for wash and rinse, automatic tank fill, S/S frame, pressure reduction valve and line strainer, manual tank fill, low water protection, and stainless steel level gauges connection provisions.

UNDERCOUNTER SCULLERY MACHINE
ELECTRIC or STEAM HEAT
45SA5-F1 (steam)
45SA5-F2 (electric with 9 KW booster)
45SA5-F2D (electric with 18 KW booster)
45SA5-F2NM (electric, non-magnetic, 11.4 kw booster)
STANDARD FEATURES
Detergent and rinse additive
connection provisions
Plastic 16" x 16" racks
Bulk-head mounted NEMA 12
control panel
Simplified scrap screen design
Door safety switch
Standard frame TEFC motor
2 tech manuals
Authorized tech rep in each port
Exact footprint replacement
Complies with ASTM
specifications
Heat:
Electric— 1.5 KW electric
immersion heater and 9 or 18
KW electric booster with low
temp cut-off.
Steam— 1 stainless steel steam
coil and steam booster with low
temp cut-off
Capillary thermometers for wash
and rinse
Automatic tank fill
S/S frame
Pressure reduction valve and
line strainer
Manual tank fill
Low water protection
Stainless steel level gauges
DESIGN
The Insinger 45SA5 washes 45 racks per hour. It pumps 70 gal/min. of
wash water through stationary wash arms. The rinse cycle consists of
stationary lower rinse arm with 6 nozzles and an upper rinse arm with 4
final rinse nozzles.
The tank, hood and door are all 16 gauge stainless steel.
OPTIONAL ACCESSORY EQUIPMENT
Non-magnetic pump & booster
Live Tech Service is Available
24 hours/day 7 days/week
800-344-4802
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com
UNDERCOUNTER SCULLERY MACHINE
Capacity per hour: 45 racks per hour
Wash tank capacity: 9.0 gallons
Wash pump: 1/2 hp 440/3/60 TEFC
Steam Consumption (tank and booster) at 16 psi min: 19 lb/hr average
94 lb/hr peak
Final rinse flow at 20 psig: 4.1 gal/min peak at 140° F min
36 gal/hr average flow
0.8 gal/rack
Exhaust requirements: Not required.
Peak drain flow: 9 gal/min
Weight:
Shipping: 381 lbs.
Operating: Dishwasher: 180
Electrical control panel: 30 lbs.
Current draw on 440/3/60:
45SA5-F1: 1.4 amps (dishwasher and booster)
45SA5-F2: 3.1 amps (dishwasher)
9.9 amps (9 KW booster)
45SA5-F2D: 3.1 amps (dishwasher)
19.8 amps (18 KW booster)
45SA5-F2NM: 3.1 amps (dishwasher)
12.6 amps (11.4 KW booster)
  • Page 1 1
  • Page 2 2

Insinger 45SA5 Features

Type
Features
This manual is also suitable for

Insinger 45SA5 is an undercounter scullery machine that washes 45 racks per hour. It has a 9.0-gallon wash tank capacity and a 1/2 hp 440/3/60 TEFC wash pump. The machine comes with standard features such as detergent and rinse additive, electric or steam heat, capillary thermometers for wash and rinse, automatic tank fill, S/S frame, pressure reduction valve and line strainer, manual tank fill, low water protection, and stainless steel level gauges connection provisions.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI