Lifetime 0113 Owner's manual

Brand: Lifetime

Model: 0113

Type: Owner's manual

MODEL N° 0113

OWNER’S MANUAL

Keep this Product ID Number and use when contacting Customer Service:

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all

packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts

using the hardware identiﬁ er and parts list in this document. Proper and complete assembly, use and supervision are essential to

reduce the risk of accident or injury.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR

PROPERTY DAMAGE AND WILL VOID WARRANTY.

s$ONOTUSEORSTOREHOTOBJECTSSUCHASGRILLSBLOWTORCHESWELDINGEQUIPMENTETCNEARTHEPRODUCT

s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION

s4WOCAPABLEADULTSAREREQUIREDFORASSEMBLY)TISALSORECOMMENDEDTHATATHIRDADULTFUNCTIONASANINSTRUCTIONREADER

SAFETY INSTRUCTIONS

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

There are beneﬁ ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com

and enjoy these great beneﬁ ts:

s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT

promotions!

s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU

s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED

But you will need to provide a sales receipt to verify your product purchase date before warranty service will be provided.

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

**For customers outside the U.S. or Canada, please contact the store for assistance.**

**U.S. and Canada customers ONLY**

)&!33)34!.#%)3.%%$%$

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME

**Call, or visit our Web site for Saturday hours**

8/18/2010

INSTRUCTION #1050480 B



FOREACHPERSON

TOOLS REQUIRED FOR ASSEMBLY

BEFORE BEGINNING ASSEMBLY

+EEPTHEHARDWAREBAGSANDTHEIRCONTENTSSEPARATE)FANYPARTSAREMISSINGCALLOUR

#USTOMER3ERVICE$EPARTMENT

)DENTIFY AND INVENTORY ALL PARTS AND HARDWARE USING THE PARTS AND HARDWARE LISTS AND

identiﬁ ers in this document.



*Electric Drill

*Measuring Tape

Carpenter’s LevelSafety GlassesPhillips Screwdriver

*For use with attaching Pegboard to sheetrock and studs.

This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part

& Hardware Identiﬁ ers, and instructions

are three-letter IDs. These IDs are below

the images of the parts and hardware to

help you locate and identify the parts and

hardware during assembly. These IDs are not

necessarily on the parts themselves.

WARNING

ASSEMBLY GUIDES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

ADZX

vXv0AN(EAD3CREW

ID Description Quantity

Main Parts

!&5   0EGBOARD3TRIP 

BHC Pegboard Strip Hardware [1047352]

!$7   Xv0AN(EAD3CREW 

BHD Tool Clip Assortment Hardware [1029336]

!)(   *(OOK 

!))   ,(OOK 

!)*   4OOLHOLDER 

!)&   v$OUBLE!RM(OOK 

!)'   v$OUBLE!RM(OOK 

PEGBOARD STRIP HARDWARE [BHC]

Part shown at actual size

0ARTSHOWNATACTUALSIZE

TOOL CLIP ASSORTMENT HARDWARE [BHD]

Parts shown at actual size

ADWX

Xv0AN(EAD3CREW

AIIX

,(OOK

AIFX

v$OUBLE!RM(OOK

AFUX

Pegboard Strip

AIGX

v$OUBLE!RM(OOK

AIHX

*(OOK

AIJX

Toolholder

HARDWARE & PARTS LIST

HARDWARE IDENTIFIER

PARTS IDENTIFIER

Note: Throughout the Parts & Hardware List, Part & Hardware Identiﬁers, and instructions are three-

letter IDs. These IDs are below the images of the parts and hardware to help you locate and identify

the parts and hardware during assembly. These IDs are not necessarily on the parts themselves.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

ADW

ADWX

AFU

SEC

Using a level, position the Pegboard Strip (AFU) in any desired location along a Wall Panel wall. Screw the

0EGBOARD3TRIPTOTHE7ALLUSINGlVE#10 x 3/4” Phillips Pan-Head Screws (ADW). See Note. Repeat this step for

second Pegboard Strip.

)NSERTHooks (AIF, AIG, AIH, AII, and AIJ).

PEGBOARD STRIP INSTALLATION

Note: The Pegboard Strip is screwed directly into the plastic. Line up the Strip anywhere on Wall so

holes are over plastic (and not over a groove in the Wall).

Note: Ensure the Pegboard Strip is level before inserting Screws.

1.1

1.2

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

Studs

Grabber Screws

ADW

ADWX

SEC

)FYOUPLANONHANGINGTHE0EGBOARD3TRIPFROM3HEETROCKOR7OOD0ANELINGWESUGGESTUSINGALEVELTO

POSITIONAvXvXv"OARDACROSSTWOSTUDSASSHOWNANDSCREWINGTHE"OARDTOTHE3TUDSUSINGFOUR

v'RABBER3CREWSTWOFOREACHSTUD0URCHASETHEv'RABBER3CREWSATYOURLOCALHARDWARESTORE

Screw the Pegboard Strip (AFU)TOTHEvXvXv"OARDUSINGlVE#10 x 3/4” Phillips Pan-Head Screws (ADW).

&OLLOWINSTRUCTIONSIN3ECTION)NSERTTHEJ-Hook (AIH), L-Hook (AII), Toolholder (AIJ), 2” Double-Arm-Hook (AIF), and

4” Double-Arm-Hook (AIG) into the holes in the Pegboard Strip. Repeat these steps for the second Pegboard Strip.

ATTACHING PEGBOARD STRIP TO SHEET ROCK OR WOOD PANELING

Note: If you wish to hang the two Pegboard Strips next to one another, use a 1”x4”x37” Board

and screw the Board across three Studs using six (6) 2” Grabber Screws (two for each stud).

2.1

2.2

ENHANCE YOUR LIFETIME

PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS:

Or call: 1-800-424-3865

To purchase accessories or other Lifetime Products, visit us at:

www.lifetime.com

Lifetime 0113 Owner's manual

Lifetime 0113 Owner's manual

Lifetime 0113 Owner's manual

Related papers

Other documents