RAB Lighting GDEZLED78P Operating instructions
- Type
- Operating instructions
GDEZLED78P POLY SHIELD
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000,
or email: marketing@rabweb.com
GDEZLED78P IN 1212
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2012 RAB LIGHTING Inc.
No
rthvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
email
Answered promptly sales@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
INSTALLATION
Polyshield mounts with four #8-32 stainless steel Screws to door as shown.
Hardware is provided with guard. Guard and shield may be used together.
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
Housing
Screws (4)
Polyshield
GDEZLED78W IN 1212
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2012 RAB LIGHTING Inc.
No
rthvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
email
Answered promptly sales@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
INSTALLATION
Wire Guard mounts with four #8-32 stainless steel Screws to door as shown.
Hardware is provided with guard. Guard and shield may be used together.
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
Screws (4)
Wire Guard
Housing
GDEZLED78W WIRE GUARD
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000,
or email: marketing@rabweb.com
LFLED SPOT LENS REFLECTOR KIT
LFLED SPOT LENS REFLECTOR KIT
Thank you for buying RAB lighting xtures. Our goal is to design the best quality
products to get the job done right. We’d like to hear your comments. Call the
Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical
Code and all applicable local codes. Proper grounding is required for
safety. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation
of the product and the hazards involved.
WARNING: Make certain power is OFF before installing or
maintaining xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION:
Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
LSLFLED-0312
INSTALLATION
1. Unscrew the Flood hood
and Reector.
2. Be sure the Gasket stays
in place on the Housing.
3. Screw the Spot Hood
Reector kit onto the
Housing. Hand tighten
only.
Note: These instructions do not cover all details or variations in equipment
nor do they provide for every possible situation during installation, operation
or maintenance.
®
®
Thank you for buying RAB lighting xtures. Our goal is to design the best quality
products to get the job done right. We’d like to hear your comments. Call the
Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical
Code and all applicable local codes. Proper grounding is required for
safety. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation
of the product and the hazards involved.
WARNING: Make certain power is OFF before installing or
maintaining xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION:
Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
LSLFLED-0312
Note: These instructions do not cover all details or variations in equipment
nor do they provide for every possible situation during installation, operation
or maintenance.
Housing
Reector
Flood hood
Spot Hood
Reector Kit
Gasket
Gasket
Housing
Reector
Flood hood
Spot Hood
Reector Kit
Gasket
Gasket
INSTALLATION
1. Unscrew the Flood hood
and Reector.
2. Be sure the Gasket stays
in place on the Housing.
3. Screw the Spot Hood
Reector kit onto the
Housing. Hand tighten
only.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not clean
or maintain while xture is energized.
INSTALLATION
Polyshield mounts with (4) #10-24 stainless steel Screws to door as shown.
Hardware is provided with guard. Guard and shield may be used together.
Screws (4)
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
Polyshield
Housing
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not clean
or maintain while xture is energized.
GDFXLED300P IN 0115
INSTALLATION
Polyshield mounts with (4) #10-24 stainless steel Screws to door as shown.
Hardware is provided with guard. Guard and shield may be used together.
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
Screws (4)
Polyshield
Housing
GDFXLED300P POLY SHIELD
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products
to get the job done right. We’d like to hear your comments. Call the Marketing Department
at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
GDFXLED300P POLY SHIELD
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products
to get the job done right. We’d like to hear your comments. Call the Marketing Department
at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2015 RAB LIGHTING Inc.
No
rthvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
email
Answered promptly sales@rabweb.com
GDFXLED300P IN 0115
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2015 RAB LIGHTING Inc.
No
rthvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
email
Answered promptly sales@rabweb.com
-
1
-
2
-
3
-
4
RAB Lighting GDEZLED78P Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
RAB Lighting BTH250GPSQ Operating instructions
-
RAB Lighting GDWP3W Operating instructions
-
RAB Lighting GDFZW Operating instructions
-
-
RAB Lighting LALED78W Operating instructions
-
-
-
-
-
RAB Lighting SLIM62YW/BL Operating instructions