2. Mustek
  3. A3 1200HS

Mustek A3 1200HS Quick Started Guide

  • Hello! I am an AI chatbot trained to assist you with the Mustek A3 1200HS Quick Started Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
i
SAFETY PRECAUTION
• Keepawayfromwaterormoistureanddustyareas.
• Neverstoreinhotandverycoldareas.
• Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
• Noobjectsfilledwithliquids,suchasvases,shallbeplacedonthe
Scanner.
• AvoiddustcontaminationwhentheScannerisnotinuse.
• Whenleftunusedforalongperiodoftime,theunitshouldbe
disconnectedfromthepowercable.
• AvoidenvironmentswheretheScannerwouldbeexposedtodirect
sunlight(oranyothersourceofexcessiveheat)forlongperiodsoftime.
• ProtecttheScannerfrompotentialliquidspillssuchassoda,coffee,
tea,andetc.
• Becarefullytokeepitwithoutdroppingitorstrongimpact.
• OperatetheScanneronalevel,well-groundedworksurface,freeof
excessivevibration.
• Don’topentheScannercasealonewithouttechnicalsupportbecause
thereisdangerofelectricalshock.
• Positiontheequipmentnearapoweroutletwhereitcanbeeasily
accessedwhenpluggedin.
ii
SYSTEM REQUIREMENTS
Processor
PC:IntelPentiumIVorfaster
Mac:IntelCoreDuoorfaster
SupportOS
PC:WindowsXP(ServicePack3)/Vista/7/8/10
Mac:MacOSX10.7to10.11andabove
ColorDisplay 1024x768resolutionorabove
RAM 1GBRAM(2GBrecommended)
FreeHardDrive
Space
PC:600MB
Mac:100MB
Drive CDorDVD-ROMDriveforsoftwareinstallation
Interface AvailableUSBport
iii
SPECIFICATIONS
Model A3 1200HS
ScanningElement ContactImageSensor(CIS)
LightSource Three-color(RGB)LEDs
ScanMode
Color:48-bit,24-bit
Gray:16-bit,8-bit
Lineart:1-bit
ScanArea(Max.) 297mmx420mm(11.7”x16.5”)
OpticalResolution 1200dpix1200dpi
EnhancedResolution 9600dpix9600dpi
Interface Hi-SpeedUSB2.0
PowerConsumption
12VDC,2A,24W(Input:100~120VACor
200~240VAC,50~60Hz)
OperationTemperature
andHumidity
10°C-35°C(50°F-95°F);10%to85%
Dimension(LxWxH) 555mmx383mmx88mm(21.9"x15.1"x3.5")
Weight 4.3kgs(9.48lbs)
iv
BUNDLED DRIVERS AND SOFTWARE
[Windows]
1. ScannerDriver-ScannerDriverincludesfollowing:
YOUMUSTFIRSTINSTALLSCANNERDRIVERINORDERTOUSE
THESCANNERONYOURCOMPUTER.
a.TWAINandWIAdriver:itcomeswithTWAINinterfacetouse
theScannerfromwithinanyWIAorTWAIN-compliantgraphics
softwareapplicationssuchasMediaImpression,Photoshop.
b.PanelV2.0:thissoftwareapplicationallowsyoutoeasilyscan
withinthisapplication.c.
c.Helpfiles:ThisincludesdetailedinstructionsofPanelV2.0andof
theTWAINinterface.
e.CleanCalibration:Runthistooltoclearthecalibrationdataleftfrom
thepreviousscanner,whenyouuseanothersamemodelscanner
onthesamecomputerwithapreviousdriver.
2. ArcSoftMediaImpression-thisTWAIN-compliantapplicationenables
scanningviatheTWAINinterface.Fordetailedinformationofthis
application,seethe“Help”fileintegratedwithinthisapplication.
3. ABBYYFineReaderSprint-thisapplicationconvertsscannedtextinto
searchabletextwhenusingthePDFfunction.Fordetailedinformation
ofthisapplication,seethe“Help”fileintegratedwithinthisapplication.
4. AdobeAcrobatReader-thisapplicationopensthescannedimagethat
isconvertedintoaPDFformatusingthePDFfunction.
[Mac]
1. ImageAquire-thisapplicationisusedtoscanfromtheScannerwithin
theTWAINinterface.FordetailedinstructionsofImageAquire,seethe
PDFfileinsidetheImageAquirefolder.
2. ScannerDriver-itcomeswithTWAINinterfacetousetheScanner
fromwithinanyTWAIN-compliantgraphicsapplicationsuchas
Photoshop.RefertothePDFfileinsidetheImageAquirefolderfor
detailedinstructionsofTWAINinterface.
3. ScanMust-thisapplicationallowsyoutoeasilyscanwithinthis
software.ForthedetailedinstructionsofScanMust,seethe“Help”file
integratedwithinthissoftware.
1
PACKAGE CONTENTS
Thispackageincludesthefollowingitems:
Scanner PowerAdapter USBCable
QuickStart
Guide
InstallationCD QuickStartGuide
2
NAMES OF SCANNER PARTS
Rear Side
FlatbedGlass
DCINPort
USBPort
ScannerLid
3
INSTALLING DRIVERS AND SOFTWARE
PLEASECOMPLETETHEDRIVERSANDSOFTWAREINSTALLATION
BEFORECONNECTINGTHESCANNER.DONOTCONNECTTHEUSBCABLE
TOTHESCANNERORCOMPUTERATTHISMOMENT.
[Windows]
1. InserttheInstallationCDintotheCDorDVD-ROMdriveofthe
computer.TheCDwillrunautomatically,andthentheinstallation
windowappearsonthescreenasfollowing:
NOTE
IftheCDdoesnotrunautomatically,locatethedriveon
thecomputeranddoubleclickon"AUTORUN.exe"file.
2. Click"ScannerDriver"fromtheinstallationwindow.
3. Selectapreferredlanguagefromthe"ChooseSetupLanguage"list.
4. Click"Next"whentheWelcomescreenappears,andthenfollowon-
screeninstructionstocompleteinstallation.
5. Returntotheinstallationwindowtoinstallothersoftwaretoyour
computertoenablecertainfunctions.
[Mac]
1. InserttheInstallationCDintotheCDorDVD-ROMdriveoftheMac.
The Autorun disc icon appears on your desktop.
2. DoubleclickontheAutorundiscicon.
The content of the disc is displayed in the Autorun folder as following:
3. Doubleclick"ScannerDriver"folder,then"A31200HSScanner.pkg"to
starttheinstallationprocess.
Follow on screen instructions to complete the installation procedures.
4. ReturntotheAutorunfolder.Doubleclickthe"ScanMust"folder,and
then"ScanMustInstaller.pkg"tostarttheinstallationprocess.
Follow on screen instructions to complete the installation procedures.
5. ReturntotheAutorunfolder.Doubleclickthe“ImageAcquire”folder,
andthen"ImageAcquire.pkg"icontostarttheinstallationprocess.
Follow on screen instructions to complete the installation procedures.
How to Uninstall the Drivers and Software
Whenyouneedtoremovethescannerdriversandsoftwarefromyour
computer,uninstallasfollowing:
1. UnplugtheUSBCableconnectingfromthecomputer.
2. Exitallrunningapplications.
3. ForWindows,gotothe“Start”menu,select“(All)Programs”,
“A31200HS”,andthenclick“Uninstall”.Followtheon-screen
instructionstoremovetheScannerDriver.
ForMac,inserttheInstallationCD,thendoubleclickontheuninstall
iconintheScannerDriverfoldertoremoveit.DragImageAcquireand
ScanMusticonfromthe"Application"foldertoTrash.
4
CONNECTING THE SCANNER
1. ConnectsuppliedPowerAdaptertotheScanner’sDCINport,andplug
theotherendtoapoweroutlet.
The power of the Scanner is now turned on.
2. Withthe
computer
on,connectsuppliedUSBCabletotheScanner’s
USBPortandtheotherendtothecomputer.
NOTE
Toturnoffthepower,unplugthePowerAdapterfromthe
poweroutlet.
5
PLACING THE ORIGINALS
1. PlacetheoriginalfacingdownontheFlatbedGlass.
2. AligntheoriginalatthepositionArrowMark.
3. ClosetheScannerLid.
PositionArrow
Mark
How to Remove the Scanner Lid
Ifyouarescanningbooksorotherthickdocuments,youcanremovethe
ScannerLidasfollowingsteps:
1. LifttheScannerLidstraightup.
2. PulltheScannerLidawayfromtheScanner.
3. PlacetheboundoriginalontheFlatbedGlass.
Gently press the bound original from above to make it flat, but do not
press it too hard.
MountingPosts
NOTE
Whenyouarefinishedscanning,replacetheScannerLid
byinsertingthe2MountingPostsintotheholesonthe
Scanner,andthengentlypushingtheScannerLiddown.
(Please turn over the page to continue
)
PN:82-239-10030
High Speed A3 Flatbed
Scanner
A3 1200HS
[ Quick Start Guide ]
6
SCANNING PROCEDURES
[Windows]
Scanning Using Panel V2.0
1. Press<PANEL>ontheScannertoopenPanelV2.0below.
Scan
Edit
Copy
OCR Exit
Help
(
)
SettingsPDF E-mailImport
2. Clickon"Settings"toopenthePanelV2.0Settings,andmakeany
necessarychangesasfollowing:
1
2
3
4
10
11
5
6
7
8
9
1. ScanMode
2. ColorMatch
3. Resolution
4. FilePath
5. FileType
6. OCRSoftware
7. OCRLanguage
8. OpenafterOCR
9. Default
10. OK
11. Cancel
3. Click"Scan"buttononPanelV2.0tostartscanning.
The preview window displays your image after scanning.
4. Press"Save"buttoninthepreviewwindowtosavethescannedimage.
YoucanplacethenextoriginalontheFlatbedGlass,andthenclick
"Scan"inthepreviewwindow,orclick"X"(Exit)toclosethepreview.
Save
Exit
Scan
NOTE
(
)
FordetailedinstructionsaboutPanelV2.0,click“?”
(Help)onPanelV2.0,orclick"Start">"(All)Programs">
"A31200HSScanner">"Help">
“Software”toopenthe
Helpfile.
[Mac]
Setting ScanMust
YoucanadjustthesettingspriortoscanningfromtheScanMustsoftware.
1. ClicktheScanMusticon( )inthemenubartoopentheScanMust
menu.
IfyoucannotfindtheScanMusticon( )inthemenubar,open
"Finder",andthenclick"Applications".FindScanMustintheApplication
folder,andthendoubleclickonittoopenitinthemenubar.
2. Click"Settings..."toopentheSettingswindowbelow.

Settings
Help
(
)
3. Selectascan-tofunction,andthenmakenecessarysettingsinthe
DestinationandScanSettingsasfollowing:
1
4
5
6 7
2 3
1
ScanTo
Menu
Selectthescan-tofunction,including“Scanto
Folder”,“ScantoPDF”,“ScantoApplication”,“Scan
toEmail”,“ScantoPrint”tochangethesettings.
2 Destination
Clickthe“Destination”tabtodisplaythesettings
options,includingFilePath,FileType,andetc.
(
)
ForthedetailedsettingsintheDestination,click
HelpintheScanMustmenu.
3
Scan
Settings
Clickthe“ScanSettings”tabtodisplaythesettings
options,includingScanMode,Resolution,andetc.
(
)
ForthedetailedsettingsintheScanSettings,click
HelpintheScanMustmenu.
4 Default
ResetbothDestinationandScanSettingstothe
defaultforthecurrentlyselectedscan-tofunction.
5 Apply
Applytheselectedscan-tofunctionwiththesettings
youchanged.
6 Cancel Cancelthechanges,andclosetheSettingswindow.
7
OK
Applytheselectedscan-tofunctionwiththesettings
youchanged,andclosetheSettingswindow.
Scanning Using ScanMust
1. ClicktheScanMusticon( )inthemenubar,thenclickascan-to
functionintheScanMustmenu,including“ScantoFolder”,“Scanto
PDF”,“ScantoApplication”,“ScantoEmail”,and“ScantoPrint”.
2. Afterscanningcompletes,thescannedimageissavedandopened
accordingtothescan-tofunctionyouselectasbelow:
• Scan to Folder-Thespecifiedfolderopensautomaticallywiththe
scannedimageselectedinit.
• Scan to PDF-ThescannedimageopensautomaticallyinPreview
bydefault.
• Scan to Application-Thescannedimageopensautomaticallyin
thespecifiedapplication(default:Preview).
• Scan to Email-Thedefaultemailapplicationopensupwiththe
scannedimageattachedinablankemail.Usethesendemail
methodoftheemailapplicationtosendthescannedimage.
Please note that Scan to Email only supports Apple Mail and MS
Outlook as Email clients.
• Scan to Print-Thecomputer’sprintdialogboxopensupwiththe
imageinit.Usetheprintdialogboxtosettheavailablesettingsof
theprinterdrivertoprintthescannedimage.
NOTE
FordetailedinstructionsaboutScanMust,click"Help"in
theScanMustmenutoopentheHelpfile.
7
SCANNING USING TWAIN INTERFACE
[Windows]
ThisscannerincludestheTWAINinterfaceforusewithinTWAIN-compliant
graphicapplicationssuchasMediaImpression,Photoshop.Followingisan
exampleofusingMediaImpression.
1. LaunchMediaImpression,andthenclick"Pictures"inthestartscreen.
2. ClickonImporticon,andthenselect"Acquire".
3. UndertheSelectthedevice,select"A31200HSScanner",thenclick
"Acquire"toopen
theTWAINinterface.
Selectthe
Scanner
Acquire
4. MakethenecessarychangesintheSettingsTabs,thenclick"Preview".
Repeatthisstepuntilyouaresatisfiedwiththepreviewresults.
You can resize the scan area by dragging the Marquee Rectangle to
make selection on the image in the Preview window.
Scan
Marquee
Rectangle
Exit
Help
(
)
Preview
Settings
Tabs
5. Click"Scan"toscanthefinalimage.
After scanning completes, you can place the next original on the
Flatbed Glass in the Scanner, then click "Scan" again.
6. Whenyou’refinishedwiththescanning,clickExiticontoimportthe
scannedimageintotheMediaImpression.
NOTE
(
)
FordetailedinstructionsaboutTWAINinterface,click
“?”(Help)ontheTWAINinterfacetoopentheHelpfile.
[Mac]
ThisscannerincludestheTWAINinterfaceforusewithinTWAIN-compliant
graphicapplicationssuchasImageAcquire,Photoshop.Followingisan
exampleofusingImageAcquire.
1. Open"Finder",andthenclick"Applications".FindImageAquire( )
iconintheApplicationfolder,andthendoubleclickonit.
2. SelecttheScannermodelfromtheImageAcquirewindow,andthen
click"Acquire"toopentheTWAINinterface.
Selectthe
Scanner
Acquire
3. Makethenecessarychangesinthesettingstabs,thenclick"Preview".
Repeatthisstepuntilyouaresatisfiedwiththepreviewresults.
You can resize the scan area by dragging the Marquee Rectangle to
make selection in the Preview window.
Scan
Marquee
Rectangle
Exit
Preview
Settings
Tabs
4. Click"Scan"toscanthefinalimage.
The scanned image will be imported into the ImageAquire window.
Click "Save" to open the Save Dialog to save the image.
Save
Save
Dialog
NOTE
IfyouusetheScannerinPhotoshop,pleaseinstall
thePhotoshopTWAINplug-inpriortouse.Referto
"UsingTWAINinPhotoshopCS4-CCversion.pdf"inthe
InstallationCD.
8
TROUBLESHOOTING
The "Found New Hardware" appears on your Windows screen.
• UnplugtheUSBCablefromthecomputer,andclick“Cancel”buttonto
closethescreen.EnsuretoinstallScannerDriverbeforeconnectingthe
Scanner.
Cannot scan.
• MakesurethatthePowerAdapterbetweentheScannerandpower
outletisconnectedfirmly.
• MakesurethattheUSBCablebetweentheScannerandyourcomputer
isconnectedfirmly.
• Makesurethecorrectscannerisselectedintheselectsourcefield.
The scanned image becomes dirty.
• Checkifthedocumentiswritteninleadpencilorwetink.
• MakesuretocleantheScanner’sFlatbedGlassfrequently.
Scanning speed is very slow.
• Scanningtakeslongerthanusualwhenyouscanathighresolutionand
largesize.
• Setalowerresolutioninthesettingstoprioritizethescanningspeed.
• Scanningwithmultipleimageprocessingselectedcanslowdownthe
scanningspeed.
Cannot add the Scanner to Photoshop.
• YouneedtoinstallthePhotoshopTWAINplug-inpriortouse.Referto
UsingTWAINinPhotoshopCS4-CCversion.pdfintheInstallationCD.
/