2. Triton Systems
  3. RL2000 Series

Triton Systems RL2000 Series, FT5000XP Series, FT7000XP Series Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Triton Systems RL2000 Series Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
POWER CORD INSTALLATION GUIDE
(RL2000, FT5000
XP
, FT7000)
NOTE
The Power Cord interface cable is located inside the vault area (Dispenser location) of the cabinet.
To gain access and connect the power cord included in the accessory box, you may have to remove
the dispenser. Refer to your applicable Installation or Service manual for removal procedures of
your dispenser.
1. Obtain the power cord that is located in the accessory box. From the exterior of cabinet, feed the small end
of the cable through the closest cable access hole (lower part of cabinet).
2. Connect and route the power cord in the unit as shown in figures below.
TDN 07100-00084 Rev C
3. Reinstall the dispenser, if applicable.
FT5000
XP
RL2000
FT7000
/