Prestige Faux Woods Operation Instructions

Brand: Prestige

Model: Faux Woods

Type: Operation Instructions

Prestige Faux Woods offer an array of styles and functionalities that will transform your home décor. The product combines the beauty of natural wood with the durability and low maintenance of faux wood. Prestige Faux Woods are available in a wide range of colors and finishes, so you can find the perfect match for your home décor. With their cordless design, Prestige Faux Woods are easy and safe to operate, making them a great choice for homes with children or pets. The blinds are also moisture-resistant, so they can be used in humid environments such as kitchens and bathrooms.

3. Attach battery pack to connector

and insert battery pack into head rail.

NOTE: If mounting the battery pack

external to head rail is preferred,

contact dealer/distributor for battery

pack extension connector

2. Install 3 AA alkaline

batteries into bottom half of

remote control. The battery

orientation is shown in the bottom of the remote case.

CAUTION: Do not use lithium batteries in remote control.

3. Place front edge of the

top cover under the lip

of the cap and slide the

cover forward to the stop.

4. Squeeze the housings together and insert the screw to

secure remote control.

1. Locate female connector on top of motor and insert Satellite Eye

(included) into connector. (Fig. A)

Satellite eye may already be connected by fabricator

2. Install the blind into the window.

3. Attach the valance to the blind.

Attaching Satellite Eye to Valance

4a. Attach included foam tape to front of satellite eye. (Fig. B)

Place satellite eye as close as possible to corner of valance and attach

to inside of valance. (Fig. C)

(If desired, snap off plastic tab Screwport)

Attaching Satellite Eye to Top Treatment

4b. When using a fabric top treatment, attach a safety pin to the

screwport then to drapery making certain that the eye is visible or

attach to the wall or window seal with a small screw. (not included) An

additional 10” satellite eye is available for installations requiring a longer

cord. Contact dealer/distributor to order.

Satellite Eye Installation

Battery Installation

(Blind)

Battery Installation

(Remote Transmitter)

Operation Instructions for 2” Motorized Horizontal Blinds - Tilt System

1. Prior to installing the blind into

the window, remove the batteries

(4 AA Lithium) from their

packaging.

2. The batteries should align as

shown on the diagram inside the

battery holder.

LITHIUM

1. Using a philips screwdriver, remove

the screw located towards the bottom

of the remote control face.

Fig. A

Fig. B

Fig. C

Prestige Window Fashions

195 Raritan Center Parkway, Edison, NJ 08818-0551 Tel: 732-225-2330 www.prestige.com Rev. 2 7/05

Tab/Screwport

Valance

In applications where blinds are installed close together, the “Cat-Eye” may be used to eliminate unwanted operation of a particular blind

or blinds by directing the infrared signal and providing more accurate control for individual blinds.

Using the Remote Control “Cat-Eye” Filter (Optional)

Operation Instructions for 2” Motorized Horizontal Blinds - Tilt System

Position “Cat-Eye” to the horizontal

position and insert into remote control.

Position “Cat-Eye” to the vertical

position and insert into remote control.

NOTE: Using the “Cat-Eye” filter will reduce the operating distance of the

remote control, however will provide better control of individual blinds.

Blinds Installed Above Each Other Blinds Installed Side by Side

Multiple Blind Operation (Synchronizing)

Trouble Shooting Tips

In applications where a blind is operating in the opposite direction, simply activate (1) blind individually until it reaches the identical

position of the other blinds(s).

EXAMPLE: Blind (b) is open, therefore operate blind (b)

ONLY until it moves to the position of blind (a).

NOTE: Removing the “Cat-Eye” may provide optimal

control when operating synchronized blinds.

Motor does not operate:

- Check the connection between the motor and the battery pack. Be certain the cable is properly plugged in. (Do not force)

- Check battery orientation in remote control and motor battery pack. Positioning of batteries should match accordingly.

- Be certain batteries are in good working order. (Remote control uses alkaline batteries only)

- Check the position of the IR receiver eye. (Must be visible) Black lense should be positioned towards user.

- Remote control should be pointed/aimed at the blind(s) intended for operation.

- Check the operation of the remote control by viewing the IR port hole. A red light should be visible when the control button is pressed.

Prestige Window Fashions

Blind (a)

Blind (b)

195 Raritan Center Parkway, Edison, NJ 08818-0551 Tel: 732-225-2330 www.prestige.com Rev. 2 7/05

For optimal customer satisfaction, the use of lithium batteries is recommended in all battery-operated systems (excluding remote controls). The use of lithium batteries helps ensure long-term battery life, depending

on usage. Extreme heat conditions may cause alkaline batteries to drain very quickly. Lithium batteries are able to withstand higher heat extremes than alkaline batteries therefore increasing life expectancy.

Prestige Faux Woods Operation Instructions

Prestige Faux Woods Operation Instructions

Prestige Faux Woods Operation Instructions

Other documents