Denso BHT-1400-CE Series Hardware User Manual

BHT-1400-CE Series

BHT-1400BWB-CE

BHT-1400QWB-CE

Windows Embedded Compact 7 model (WEC7)

Barcode/2D code

Handy Terminal

Barcode/2D code Handy Terminal

Hardware User's Manual

i

BHT-1400-CE Series

Preface

Read t

his manual thoroughly before using the product to ensure the proper use of the product and its functions, and

keep the manual in a convenient location as a quick reference.

Bac

k up any important data to the “FLASH” folder or to the computer for data protection.

Data including files and settings stored in the RAM;

- could be lost, if the battery is left discharged or removed, or replaced incorrectly.

- will be lost, when performing full reset (refer to “Chapter 2 BHT Preparation” – “2.7 Resetting and Full Resetting”).

The RAM will be restored to the factory default after full reset.

It is strongly recommended to back up any important data before full reset.

Note: When the BHT turns ON after the data in the RAM is deleted, the BHT starts from the “Initial Setup” (refer to

“Chapter 2 BHT Preparation” – “2.4 Initial Setup”).

BH

T, QR Code, iQR Code, SQRC and QBdirect are registered trademarks of DENSO WAVE INCORPORATED.

Microsoft, ActiveSync, Windows and the Windows logo are trademarks or registered trademarks of Microsoft

Corporation of the US or other countries.

Bluetooth

®

is a trademark owned by its proprietor and used by DENSO WAVE under license.

Other company names or product names contained in this manual are trademarks or registered trademarks of their

respective holders.

Som

e of the pixels on the LCD touch screen may not illuminate or stay permanently illuminated. There may also be

inconsistencies in color and brightness. None of these factors implies an LCD functional defect.

A

thin Newton's ring (rainbow-like patterns) may appear on the touch panel.

This does not necessarily indicate a problem with the touch panel.

Liability Limitations

• DENSO WAVE INCORPORATED does not assume any product liability (including damages for lost profits,

interruption of operations, or the loss of business-related information) arising out of, or in connection with, the

use of, or inability to use the BHT system software or related manuals.

• DENSO WAVE INCORPORATED (“DENSO WAVE”) takes reasonable precautions to ensure its products do not

infringe upon any patents or other intellectual property rights of other(s), however, DENSO WAVE cannot be

responsible for any patent or other intellectual property right infringement(s) or violation(s) arising from any of the

following.

1) The use of DENSO WAVE's products in connection or in combination with other components, products,

devices, data processing systems or software not supplied by DENSO WAVE.

2) The use of DENSO WAVE's products in a manner for which they were not intended nor designed.

3) The modification of DENSO WAVE's products by parties other than DENSO WAVE.

• If it is determined by DENSO WAVE INCORPORATED that malfunction of the product is due to the product

having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the

warranty period.

ii

Barcode/2D Code Handy Terminal

Customer Registration and Inquiries

Customer Registration

To allow us to provide our customers with comprehensive service and support, we request that all customers

complete a Member Registration Form. Registered members will be offered the following privileges.

• The latest upgrade information

• Free information for exhibitions, events and new products

• Free Web-information service "QBdirect".

QBdirect Service Contents

Information search service (FAQ)

Offers detailed information on each product.

Download service Offers downloads of update modules with

the latest BHT Series

systems or software, and sample programs.

E-mail inquiries

Product related queries can be sent in by e-mail.

* Please note that these privileges may be subject to change without prior notice.

− How to Register

Access the URL below and follow the instructions provided.

0Hhttp://www.qbdirect.net/

Inquiries

− Technical Inquiries (QBdirect)

• BHT product programming method

• Product setup method and usage

• Other technical questions

Inquires relating to the above can be made at our exclusive Web site for registered users (QBdirect).

Access the link below to log on or register.

1Hhttp://www.qbdirect.net/

iii

BHT-1400-CE Series

About this Manual

• The

contents of this manual may be subject to change without prior notice.

• The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.

• Every reasonable effort has been taken to ensure that the information contained in this manual is complete and

accurate; however, should you notice any questionable points, errors or omissions, please contact DENSO

WAVE.

• The copyright for this User’s Manual belongs to DENSO WAVE INCORPORATED.

• All screens in this User’s Manual are simulated. Actual screens may differ. File names used are only for

explanation purposes and will not be displayed if file names are not exactly the same.

Manual Contents

This manual consists of the following 6 chapters. Refer to the User’s Manual (Software) for details on the desktop,

start and system menus as well as on the wireless network.

Chapter 1 Outline

Describes the BHT system and overall outline of the BHT.

Chapter 2 BHT Preparation

Describes information and preparations required prior to operation.

Chapter 3 Basic Operation

Describes how to read codes using the BHT, the backlight function, how to use the keypad, and BHT

data transmission.

Chapter 4 Communication

Describes technical information on BHT Ethernet communication, Bluetooth

®

communication, and

wireless communication, and provides details of Microsoft ActiveSync.

Chapter 5 Maintenance

Describes battery replacement, and daily procedures for taking care of the BHT and CU.

Chapter 6 Specifications

Describes specifications for hardware, readable barcodes, and interfaces.

Appendices

Describes the Communication Units (CU).

iv

Barcode/2D Code Handy Terminal

Related Documentations

• User’s Manual (Software)

• BHT API Reference Manual

• BHT Class Library Reference Manual

• Bluetooth Library Reference Manual

• kbifCE User’s Guide

• SQRC Setting User’s Guide

• Remote Desktop Plug-in Reference Manual

v

BHT-1400-CE Series

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

 Read through this manual carefully to use the BHT and CU safely and correctly.

Always keep this manual nearby for easy reference.

 The symbols used in this manual

The symbols used in this manual are used to explain safe and correct use of the product so as to prevent bodily

injury and property damage to you and others.

Before reading this manual, make sure that you fully understand the meanings of the symbols below.

Alerts you to those conditions that could cause serious bodily injury or death if

the instructions

are not followed correctly.

Alerts you to those conditions that could cause minor bodily injury or substantial property

damage if the instructions are not followed correctly.

Meaning of Symbols

A triangle ( ) with a picture inside alerts you to a warning of danger. Here you see the warning for electrical

shock.

A diagonal line through a circle ( ) warns you of something you should not do; it may or may not have a picture

inside. Here you see a screwdriver inside the circle, meaning that you should not disassemble.

A black circle ( ) with a picture inside alerts you to something you MUST do. This example shows that you

MUST unplug the power cord.

vi

Barcode/2D Code Handy Terminal

Handling the battery

Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an

explosion.

• Do not disassemble or modify the battery.

• Do not connect the battery (+) and (-) terminals with a metal object such as a wire.

• Do not carry or store the battery together with metallic ball-point pens, necklaces, coins, hairpins, etc.

• Do not use or store the battery in places exceeding the service or storage temperature.

• Do not expose the battery to fire or heat.

• Do not use or leave the battery near high-temperature locations (50 °C or higher) such as a fire or heater.

• Do not put or wet the battery with any liquid.

• Do not charge the battery near a fire or in direct sunlight.

Failure to follow this instruction may lead to liquid spill, blowout or combustion due to the increased

temperature in the battery.

• Do not charge the rechargeable battery where any inflammable gases may be emitted

• Do not hammer nails into the battery, hit it with a hammer, or step on it.

• Do not subject the battery to strong impact or throw it.

• Do not use a damaged or deformed battery.

• Do not solder directly to the battery.

• During use, charging, or storage of the battery, if any odor comes from the battery or it is overheated,

discolored, deformed, or anything unusual is noticed, remove the battery from the BHT or charger. Do

not use the battery.

• If any battery fluid leaks out from the battery and gets into your eyes or comes into contact with the skin,

wash thoroughly with clean water such as tap water without rubbing, and seek medical attention

immediately. Failure to follow instruction may result in eye or skin injuries.

vii

BHT-1400-CE Series

To System Designers

 In a life-critical system such as a medicines management system, even a simple data error may cause a

potential life-threatening situation. Always provide a redundant design and fail-safe system to protect

human lives.

Handling the BHT

Failure to follow all instructions listed below may cause electrical shock, overheating and smoking.

• Do not disassemble or modify the BHT.

• Do not insert foreign objects in the BHT.

• Do not wet the BHT with any liquid.

• Do

not put the BHT into a microwave oven or high-pressure container.

• Do not

leave the BHT in places where there are excessively high temperatures, such as inside

closed-up automobiles or in places exposed to direct sunlight.

• Do not use the BHT in dusty or humid environments or places where a sharp temperature change is

expected.

• Do not use the BHT if the case is damaged.

• Do not use the power supply other than the battery specified by DENSO WAVE.

• If the liquid leaks out from the broken LCD, do not swallow, inhale or touch it.

• Do not poke anyone’s eyes with the stylus that comes with the BHT.

• Do not stare into the laser light.

• Do not point the code reading window at anyone’s eyes.

• If smoke, abnormal odor, noises, or anything unusual is noticed, immediately turn the BHT off and

remove the battery from the BHT.

• If the battery fluid leaks out from the battery and gets into your eyes, or comes into contact with the skin,

wash thoroughly with clean water such as tap water without rubbing, and seek medical attention

immediately. Failure to follow instruction may result in eye or skin injuries.

• Do not touch the broken LCD if it is cracked or broken, as this may cause bodily injury.

viii

Barcode/2D Code Handy Terminal

Handling the battery

Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.

• If smoke, abnormal odor, noises, or anything unusual is noticed, stop using the battery immediately.

•Do not put the battery into a microwave oven or high-pressure container.

• Stop charging if the charge does not complete after the specified time has elapsed.

Handling the BHT

Failure to follow all instructions listed below may cause not only incorrect operation, but also overheating, smoking

and malfunction.

• When using the hand belt, avoid getting it caught in other objects or entangled it in rotating machinery.

• Stop charging if the charge does not complete after the specified time has elapsed.  Do not use the

BHT near wireless devices such as personal radios and ham radios.

• Do not place magnetic cards such as cash cards, credit cards, etc., close to the BHT speaker.

Failure to follow instruction may result in the loss of magnetic data.

• Do not place your ear close to the speaker when sounds are emitted.

Failure to follow instruction may result in hearing loss.

• Do not use excessive force when inserting or removing the rechargeable battery.

• Do not use the BHT in environments where static electricity can build into significant charges.

• Do not drop the BHT on the floor or subject it to strong impact.

• Do not use anything other than the stylus pen that comes with this product to avoid scratching or

breaking the screen.

• Do not touch the BHT with greasy hands or gloves.

• Make sure that both the BHT and battery are dry before placing the BHT into the cradle Failure to follow

instruction may result in a fire or electrical shock

•This product is equipped with the connector for a microSD card. Do not insert anything other than a

microSD card. Do not use excessive strength when inserting the microSD card Insert the microSD card

straight into the slot with the metal contacts facing up and going in first. Failure to follow instruction may

damage the microSD card and connector.

•Plugging in the BHT into the CU: Slide the BHT gently into the CU. Make sure that it is placed along the

guides and not tilted or twisted. If the BHT does not easily fit into the CU, please take it out, check the CU

and the BHT for interfering obstacles and try again. Never use any force to attach the BHT into the CU.

ix

BHT-1400-CE Series

Declaration of Conformity

For European Union

English: Hereby, DENSO WAVE INCORPORATED declares that the devices BHT-1461BWB-CE and

BHT-1461QWB-CE are in compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.

Български: С настоящето DENSO WAVE INCORPORATED декларира, че устройствата

BHT-1461BWB-CE и BHT-1461QWB-CE съответстват на съществените изисквания и другите приложими

разпоредби на Директива 1999/5/EО.

Česky: Společnost DENSO WAVE INCORPORATED tímto prohlašuje, že zařízení BHT-1461BWB-CE a

BHT-1461QWB-CE splňují základní požadavky i ostatní příslušná ustanovení směrnice 1999/5/ES.

Dansk: Undertegnede, DENSO WAVE INCORPORATED, erklærer herved, at følgende udstyr, BHT-1461BWB-CE og

BHT-1461QWB-CE overholder de væsentlige krav og øvrige relevante krav i Rådets direktiv 1999/5/EF.

Deutsch: Hiermit erklärt der Hersteller, DENSO WAVE INCORPORATED, dass die Geräte BHT-1461BWB-CE und

BHT-1461QWB-CE die grundlegenden Anforderungen und alle sonstigen einschlägigen Bestimmungen der Richtlinie

1999/5/EG erfüllen.

Eestikeelne: Käesolevaga kinnitab DENSO WAVE INCORPORATED, et seadmed BHT-1461BWB-CE ja

BHT-1461QWB-CE vastavad direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele

asjakohastele sätetele.

Español: Por medio de la presente, DENSO WAVE INCORPORATED declara que los dispositivos BHT-1461BWB-CE

y BHT-1461QWB-CE cumplen con los requisitos esenciales y otras disposiciones aplicables o exigibles de la

Directiva 1999/5/CE.

Français: Par la présente, DENSO WAVE INCORPORATED déclare que les terminaux BHT-1461BWB-CE et

BHT-1461QWB-CE sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive

1999/5/CE.

Gaeilge: Leis seo, dearbhaíonn DENSO WAVE INCORPORATED go bhfuil na gléasanna BHT-1461BWB-CE agus

BHT-1461QWB-CE i gcomhréir le bunriachtanais agus le forálacha ábhartha eile Threoir 1999/5/CE.

Hrvatski: DENSO WAVE INCORPORATED ovime izjavljuje da su uređaji BHT-1461BWB-CE i BHT-1461QWB-CE u

skladu s osnovnim zahtjevima i drugim bitnim odredbama Direktive 1999/5/EC.

Íslenska: DENSO WAVE INCORPORATED lýsir því hér með yfir að tækin BHT-1461BWB-CE og BHT-1461QWB-CE

uppfylla grundvallarkröfur og samræmast öðrum viðeigandi ákvæðum tilskipunar 1999/5/EB.

Italiano: Con la presente, DENSO WAVE INCORPORATED dichiara che i dispositivi BHT-1461BWB-CE e

BHT-1461QWB-CE sono conformi ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla Direttiva

1999/5/CE.

Latviešu: Ar šo DENSO WAVE INCORPORATED deklarē, ka ierīces BHT-1461BWB-CE un BHT-1461QWB-CE atbilst

Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių: Šiuo „DENSO WAVE INCORPORATED“deklaruoja, kad šis BHT-1461BWB-CE ir BHT-1461QWB-CE atitinka

esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Română: Prin prezenta, DENSO WAVE INCORPORATED declară că aparatele BHT-1461BWB-CE şi

BHT-1461QWB-CE sunt în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale Directivei 1999/5/CE.

Magyar: Ezennel a DENSO WAVE INCORPORATED kijelenti, hogy a BHT-1461BWB-CE és a BHT-1461QWB-CE

eszköz megfelel az 1999/5/EK irányelv alapvető követelményeinek és egyéb vonatkozó előírásainak.

Malti: Hawnhekk, DENSO WAVE INCORPORATED tiddikjara li t-tagħmir BHT-1461BWB-CE u BHT-1461QWB-CE hu

konformi mar-rekwiżiti essenzjali u ma’ dispożizzjonijiet rilevanti oħrajn ta’ Direttiva 1999/5/KE.

Nederlands: Hierbij verklaart DENSO WAVE INCORPORATED dat de toestellen BHT-1461BWB-CE en

BHT-1461QWB-CE in overeenstemming zijn met de essentiële eisen en de andere relevante bepalingen van richtlijn

1999/5/EG.Nederlands:

Norsk: DENSO WAVE INCORPORATED erklærer med dette at enhetene BHT-1461BWB-CE og BHT-1461QWB-CE

er i samsvar med regelverk og øvrige relevante bestemmelser i direktiv 1999/5/EF.

x

Barcode/2D Code Handy Terminal

Polski: DENSO WAVE INCORPORATED niniejszym oświadcza, że urządzenia BHT-1461BWB-CE i

BHT-1461QWB-CE są zgodne z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy

1999/5/WE.

Português: DENSO WAVE INCORPORATED declara que os dispositivos BHT-1461BWB-CE e BHT-1461QWB-CE

estão conforme os requisitos essenciais e a outras provisões relevantes da Directiva 1999/5/EC.

Slovensky: Spoločnosť DENSO WAVE INCORPORATED týmto vyhlasuje, že zariadenia BHT-1461BWB-CE a

BHT-1461QWB-CE sú v súlade so základnými požiadavkami a ostatnými príslušnými ustanoveniami Smernice

1999/5/ES.

Slovenščina: Podjetje DENSO WAVE INCORPORATED izjavlja, da sta napravi BHT-1461BWB-CE in

BHT-1461QWB-CE skladni z bistvenimi zahtevami in drugimi relevantnimi določili direktive 1999/5/ES.

Suomi: Täten DENSO WAVE INCORPORATED vakuuttaa, että tuotteet BHT-1461BWB-CE ja BHT-1461QWB-CE

ovat direktiivin 1999/5/EY oleellisten vaatimusten ja sen näitä tuotteita koskevien muiden ehtojen mukaisia.

Svenska: DENSO WAVE INCORPORATED intygar härmed att produkterna BHT-1461BWB-CE och

BHT-1461QWB-CE uppfyller de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av

direktivet 1999/5/EG.

Ελληνικά: Με το παρόν, η DENSO WAVE INCORPORATED, δηλώνει ότι οι συσκευές BHT-1461BWB-CE και

BHT-1461QWB-CE πληρούν τις βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της Οδηγίας 1999/5/ΕK.

CE

marking

Ref

er http://www.qbdirect.net/ for the DoC (Declaration of Conformity)

Türkiye Cumhuriyeti; AEEE Yönetmeliðine Uygundur

For Australia and New Zealand

This BHT-1461BWB-CE and BHT-1461QWB-CE contains Wireless LAN and Bluetooth® features.

RCM marking

1.1 System Configuration ···································································· 2

1.1.1

Hardware Configuration······································································ 2

1.1.2

Software Configuration ······································································· 3

1.2 Components and Functions ···························································· 4

1.2.1

BHT Front/Back ················································································ 4

1.2.2

Keypad···························································································· 5

1.2.3

Screen image ··················································································· 7

BHT-1400-CE Series

Chapter 1

Outline

This chapter describes the BHT system and provides an overall outline of the BHT.

2

BHT-1400-CE Series

1.1 System Configuration

Thi

s section describes the hardware and software required for the code data collection system using the BHT.

1.1.1 Hardware Configuration

The following figure shows the required hardware for the BHT barcode data collection system.

The required hardware varies depending on the communication method used.

Host computer

BHT

Wireless LAN access point

(option)

Wireless

communication

Ethernet

BHT

Bluetooth®-enabled

devices (option)

Bluetooth

®

communication

USB

communication/

RS232C communication

Ethernet

CU-AL1-14

CU-AU1-14 / CU-AR1-14

3

Barcode/2D Code Handy Terminal

1.1.2 Software Configuration

[1]

BHT Operating System (OS)

Microsoft Windows Embedded Compact 7

[2]

Application Program Development Environment

Refer to "BHT API Reference Manual" and "BHT Class Library Reference Manual”.

4

BHT-1400-CE Series

1.2 Components and Functions

1.2.1 BHT Front/Back

No. N

ame Function and Description

① Touch panel LCD

Displays characters and graphic patterns.

The buttons and menus can be selected by tapping the screen with the stylus.

② LED

Indicates the code read status.

Illuminates in blue when a code is successfully read.

③

④

Trigger switches

(M3 and M4 Magic keys)

Reads a barcode when pressed, the same as the SCAN key.

The SF and ENT key functions can be assigned to these magic keys using the SYSTEM

MENU. Character strings can be assigned at user programs.

Refer to “User’s Manual (Software)” for details on how to operate the SYSTEM MENU.

⑤ Stylus

Used to operate the touch panel.

⑥ Speaker Emits sound.

⑦ Hand strap Use the hand belt to Keep the BHT secure in the palm of your hand.

⑧ Battery cover Remove this cover when replacing the battery.

⑨ Battery cover lock Locks or unlocks the battery cover.

⑩ Code reading window Point the window at a code when reading.

⑪ Charging/communication terminal Communicates or charges the BHT when placed in the CU.

⑫

Wireless LAN / Bluetooth

®

communication antennas

Communicates with a wireless LAN access point or a Bluetooth®-enabled device.

⑬

Microphone

Built-in microphone

①

②

⑥

⑦

⑧

⑨

⑪

⑩

⑤

④

③

⑫

⑬

5

Barcode/2D Code Handy Terminal

1.2.2 Keypad

The key assignments are changeable with user programs.

The figure below shows an example of key assignments.

No.

Key

Name

Function and Description

(1)

Cursor key

Moves a cursor, selects menus or functions.

(2)

Magic key [M1]

• M2 key is assigned a tab key by default.

• Each of the M3 and M4 keys is assigned a trigger switch by default.

• The SF Key or the ENT key function can be assigned to any of the magic keys in

the SYSTEM MENU.

• Tab key: Moves a cursor to the next tab stop.

• Trigger key: Used to read a code.

(3)

Tab key

(Magic key [M2])

(4)

Left trigger key

(Magic key [M3])

Right trigger key

(Magic key [M4])

(5)

Scan key

Press to read a code. (Works the same as the Trigger key.)

(6)

Numerical keys

Enters data.

①

③

⑦

④

⑧

⑩

②

⑤

⑥

⑨

⑪～⑭

6

BHT-1400-CE Series

(7)

Ba

ckspace/clear key

Deletes the last entered character (backspace). When pressed and held for 1

second or more, cancels entry and returns the LCD display to the previous screen

(clear.)

(8)

Enter key Enters data or execute operations.

(9)

Power key Turns the BHT power ON and OF F.

(10)

Shift key

Used in combination with other keys such as the numerical keys or power key

for special input procedures.

(11)

Function mode key Switches to the function mode.

(12)

Alphabetical mode

key

Switches to alphabet entry mode.

(13)

Esc

ape key Cancels the operation.

(14)

Menu

key

Display the menu screen.

7

Barcode/2D Code Handy Terminal

1.2.3 Screen image

All screens in this User’s Manual are simulated.

Actual screens may differ depending on user settings and other factors.

Note: Taskbar may also differ from the actual screens.

Taskb

ar icons

The following icons are displayed in the taskbar to show the program status, operation modes and

notifications.

Show

s the battery power level.

Shows a wired LAN connection status when using a CU.

: BHT is connected to a wired network.

: BHT is disconnected to a wired network.

Show

s a wireless network connection status and radio field strength.

: Wireless LAN is disconnected or failed to authenticate

→ → → : Vertical bars indicate radio field strength.

Strong → Weak

Shows a Bluetooth

®

device power status.

: The Bluetooth® device is powered on. (Blue)

: The Bluetooth® device is powered off. (Grey)

(

This icon does not show in taskbar at default.

To show this icon, change the settings in the System Menu or with user programs.)

Show

s that shift mode is ON.

Show

s that function mode is ON.

Show

s that the BHT is connected to a computer via Microsoft ActiveSync or Windows Mobile Device Center

(WMDC).

Shows that alphabet entry mode is ON. (To change entry mode, press the Alpha key.)

Refer to the BHT Class Library Reference Manual “Chapter 9 Keyboard” for the input character details while in

the ALP mode.

To di

splay the desktop while an application is running, tap this icon.

Tap again to go back to the original application screen.

8

BHT-1400-CE Series

Shows the software keyboard status.

(Tap the icon to switch the software keyboard between “show” or “hide”, or to change the activation status.)

: Shows that the software keyboard is activated.

: Shows that the software keyboard is deactivated.

Show

s that the CPU is in standby mode.

(This icon is not displayed in taskbar at default.

To show this icon, change the settings in the System Menu or with user programs.)

Show

s that the Caps Lock key on the software keyboard is ON.

Tap this icon to display or hide the software keyboard menu.

−

Note

−

To minimize power consumption, the BHT automatically switches to standby mode after it has

not been operated for a specified period*.

In standby mode, the touch screen is not refreshed

. As a result, icon

s in the taskbar may not

be displayed or refreshed, and the calendar clock may not display the correct date or time.

*

Default is one second, and can be changed to desired time period in the System Menu

or

with user programs. Refer to the "BHT API Referen

ce Manual" or "BHT Class Library

Reference Manual” for details of the user program creation method.

BHT-1400-CE Series

2.1 Preparation ················································································ 10

2.2 Charging the Battery ···································································· 10

2.2.1

Battery Power Level Indicator ···························································· 15

2.2.2

Battery Voltage Drop ········································································ 15

2.3 Attaching the Hand Strap ······························································ 16

2.3.1

Attaching the Hand Strap ·································································· 16

2.3.2

Holding the BHT ············································································· 16

2.3.3

Using the Stylus ·············································································· 16

2.3.4

How to use the touch screen ····························································· 17

2.4 Initial Setup ················································································ 18

2.5 Turning OFF the Power ································································ 19

2.5.1

Normal Power OFF ········································································· 19

2.5.2

Turning the Power OFF after Registry Back-up ····································· 19

2.6 Reset and Full Reset···································································· 20

2.6.1

Reset ···························································································· 20

2.6.2

Reset Method ················································································· 20

2.6.3

Full Reset ······················································································ 20

2.6.4

Full Reset Method ··········································································· 20

2.6.5

Memory Contents after Reset/Full Reset ············································· 21

2.6.6

Reinstall/Recovery methods of data after Reset/Full reset ······················ 21

2.7 Inserting and Removing the microSD Card ······································· 22

Chapter 2

BHT Preparation

This chapter describes inserting and charging the battery cartridge, turning

the BHT power ON and OFF, and use of the hand strap.

Page is loading ...

Denso BHT-1400-CE Series Hardware User Manual

This manual is also suitable for

Denso BHT-1400-CE Series Hardware User Manual

Related papers

Other documents