7
i733 Getting Started
3 Press e to return to the idle screen.
Within 24 hours of enabling security, you will receive
a Net alert containing your Personal Telephone
Number (PTN), Nextel Customer Care number,
Direct Connect number, and Talkgroup lists for
Group Connect calls.
Note: If you are transferring your phone number
to Nextel from your previous carrier, that
number will be automatically programmed
into the Contacts list for all other phones
that were part of your order. For more
information, go to www.nextel.com/WLNP.
1 When you receive a Net alert saying New
Browser Message - Receive Programming
Info,pressA under Goto.
2 You are prompted to accept changes to your lists.
Press A under Ok.
3 You are prompted again to accept changes to
your lists. Press A under Ok.
4 A confirmation screen displays. Press A under
Ok.
5 Press e to return to the idle screen.
Finding Your Phone Number
1 Press m to access the main menu.
2 Scroll to My Info.
3 Press O.
4 Scroll to see your information:
•Name— Enter your name.
•Line1and Line 2 — your phone numbers for
phone lines 1 and 2. These are filled in when
you receive your first Net alert after enabling
over-the-air security on your phone.
• Direct Connect — Your Direct Connect
number is the number that others use to
contact you using Direct Connect service. It is
filled in when you receive your first Net alert
after enabling over-the-air security on your
phone.
•GroupID— the number of the Talkgroup you
have joined.
• Carrier IP — the IP address assigned to
Nextel.Itisfilledinwhenyouregisterfor
packet data services.
•IP1Addressand IP2 Address —theIP
addresses assigned to you for using the
Internet with your phone.
•Ckt— Your circuit data number is the number
you use if you want to use your phone to
transfer circuit data. You receive this number
from Nextel.
• Service Status — This information may be
used by Nextel Customer Care if there is a
problem with your phone’s services.