2
Pay Attention!
• All servers and systems in the rack should be planned with the airflow
direction. All FRU components must have the same air flow direction. A
mismatch in the air flow will affect the heat dissipation.
Package Contents
System Package
•1 x System
• 1or 2 (according to order) x Power cables – Type C13-C14
• 1 x Harness RS232 2M cable – DB9 to RJ-45 (for managed systems
only)
Rail-kit Package
• 1 x 2-System metal frame - fits into racks with from 21” (533mm) to 34”
(864mm) between the vertical supports.
• 4 x system mounting rails - The kit contains enough rails to install 2
systems.
• 10 x M-5 Pan head screws
• 24 x flat head screws - The kit contains enough screws to install 2 sys-
tems.
• 10 x spacer bushing for frame installation
•1 x blank cover
• 4 x rubber stick-on feet. Not used for side by side installation
•Quick Start Guide
If anything is damaged or missing, contact your Mellanox representa-