Silvercrest SHAZ 21.6 B2 Operating Instructions Manual

Brand: Silvercrest

Model: SHAZ 21.6 B2

Category: Vacuum cleaners

Type: Operating Instructions Manual

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

DEUTSCHLAND

Status of information · Stand der Informationen:

CORDLESS HAND-HELD AND UPRIGHT VACUUM CLEANER

SHAZ 21.6 B2

IAN 302302 IAN 302302

02/2018 ID: SHAZ 21.6 B2_18_V1.3

AKKU-HAND- UND -BODENSTAUBSAUGER

Bedienungsanleitung

CORDLESS HAND-HELD AND UPRIGHT VACUUM CLEANER

Operating instructions

English..................................................................................... 2

Deutsch.................................................................................. 18

Overview / Übersicht

27 3128

36 37 38 39 40

29 30

Contents

1. Overview ........................................................................................ 3

2. Intended purpose ............................................................................ 4

3. Safety instructions ........................................................................... 5

4. Items supplied ................................................................................. 6

5. The base station .............................................................................. 7

5.1 Fastening the base station...................................................................... 7

5.2 Storing after use ................................................................................... 7

6. Charging the battery ....................................................................... 7

7. Assembly ......................................................................................... 8

7.1 Engaging and disengaging connections .................................................. 8

7.2 Prior to every use.................................................................................. 8

7.3 The suction pipe.................................................................................... 9

7.4 The floorhead....................................................................................... 9

7.5 Large nozzle ........................................................................................ 9

7.6 Large brush nozzle................................................................................ 9

7.7 Small nozzles..................................................................................... 10

8. Vacuum cleaning ........................................................................... 10

8.1 Using the nozzles................................................................................ 10

9. Filter and dust container ................................................................ 10

9.1 Dust container .................................................................................... 11

9.2 Paper filter (HEPA) .............................................................................. 11

9.3 Metal filter ........................................................................................ 11

9.4 Motor protection filter.......................................................................... 11

9.5 Exhaust air filter.................................................................................. 11

10.Cleaning and care .......................................................................... 12

11.Storage ......................................................................................... 12

12.Disposal ........................................................................................ 13

13.Trouble-shooting ............................................................................ 13

14.Technical specifications .................................................................. 14

15.Ordering accessories ..................................................................... 14

16.Warranty of the HOYER Handel GmbH ........................................... 15

1. Overview

1 Battery compartment

2 Exhaust air filter (under the filter cover)

3 Unlocking mechanism for the filter cover

4 Filter cover

5 Suction device

6 Charging socket (connection of power adapter and/or plug of the base sta-

tion)

7 Paper filter (HEPA) (in the filter carrier)

8 Filter carrier (inside the dust container)

9 Opening at the suction device for the suction pipe, the floorhead, the large

nozzle and the adapter

10 Unlocking mechanism for the opening|9

11 Dust container

12 Metal filter

13 Motor protection filter (between dust container and suction device)

14 Unlocking mechanism for the dust container

15 ECO ECO button (reduces the suction power)

16 On/off switch

17 Handle

18 Connection of the suction device

19 Holder to hang up in the base station

20 Suction pipe

21 Opening at the suction pipe for the floorhead, the large nozzle and the

adapter

22 Floorhead (with joint)

23 Rollers of the floorhead

24 Inspection window of the floorhead

25 Rotating brush

26 Base station (for wall mounting)

27 Holder for the suction pipe

28 Plug for connecting the charging socket

29 Holder for the suction device

30 Holders for two nozzles

31 Power adapter with power cable

32 Connection for power adapter

33 Battery

34 Charging indicator of the battery

35 Unlocking mechanism of the battery

36 Small brush nozzle

37 Large brush nozzle (rotatable)

38 Large nozzle

39 Adapter for the small brush nozzle and small nozzles

40 Adapter for the large brush nozzle

not shown:

Fixing material

(2 rawlplugs, 2 screws)

Drilling template

Thank you for your trust!

Congratulations on your new battery-pow-

ered hand-held vacuum cleaner.

For safe handling of the product and in or-

der to get to know the entire scope of fea-

tures:

• Thoroughly read these user in-

structions prior to initial use.

• Above all, observe the safety in-

formation!

• The device should only be used

as described in these user in-

structions.

• Keep this copy of the user in-

structions for reference.

• If you pass the device on to

someone else, please include this

copy of the user instructions. The

operating instructions are a part

of the product.

We hope you enjoy your new

battery-pow-

ered hand-held vacuum cleaner

2. Intended purpose

The

battery-powered hand-held vacuum

cleaner

is suited to vacuum normal, dry

house dust and a little coarser dirt.

The device is designed for private home use

and must not be used for commercial pur-

poses.

The device must only be used indoors.

Foreseeable misuse

VARIOUS DANGERS!

~ The following materials must not be

sucked in:

- Liquids and moist dirt

- Explosive or flammable materials

such as flour or coal dust

- Harmful substances such as asbestos

dust

- Ember, burning matches or other hot

materials

- Particularly fine dusts such as toner

for copying machines. The filter inside

the device is not suited for such mate-

rials.

3. Safety instructions

Warnings

If necessary, the following warnings will be

used in these user instructions:

DANGER! High risk: failure to ob-

serve this warning may result in inju-

ry to life and limb.

WARNING! Moderate risk: failure to ob-

serve this warning may result in injury or se-

rious material damage.

CAUTION: low risk: failure to observe this

warning may result in minor injury or mate-

rial damage.

NOTE: circumstances and specifics that

must be observed when handling the de-

vice.

Instructions for safe operation

~ This device can be used by children from the age of 8 and peo-

ple with restricted physical, sensory or intellectual abilities or

people without adequate experience and/or understanding, if

they are supervised or instructed on how to use this device safely

and if they are aware of the resulting dangers. Children must not

play with the device. Cleaning and maintenance by the user

must not be performed by children without supervision.

Children must not play with the device.

~ Prior to cleaning, the battery must be removed from the suction

device.

~ The device must not be used after falling or when showing visible

damage, or if it is leaking.

~ If the power cable of this device should become damaged, it

must be replaced by the manufacturer, the manufacturer's custom-

er service department or a similarly qualified specialist in order

to avoid any hazards.

DANGER for children

~ Children must not play with packing ma-

terial. Do not allow children to play with

plastic bags. There is a risk of suffoca-

tion.

DANGER to and from pets

and livestock

~ Electrical devices can represent a hazard

to pets and livestock. In addition, animals

can also cause damage to the device. For

this reason you should keep animals

away from electrical devices at all times.

DANGER! Risk of electric

shock due to moisture

~ Protect the device from moisture, water

drops and water splashes.

~ The device, the cable and the mains

plug must not be immersed in water or

any other liquids.

~ If liquid gets into the device, remove the

mains plug immediately. Have the de-

vice checked before reusing.

~ If the device (base station) has neverthe-

less fallen into water, pull out the power

adapter immediately, and only then

take the device out of the water. Do not

use the device again, and have it

checked by a specialist workshop.

~ Never touch the device with wet hands.

DANGER! Risk of electric shock

~ Lay the power cable such that no one

can step on it, get caught on it, or trip

over it.

~ Only connect the power adapter to a

properly installed and easily accessible

wall socket whose voltage corresponds

to the specifications on the rating plate.

The wall socket must continue to be eas-

ily accessible after the device is

plugged in.

Ensure that the power cable cannot be

damaged by sharp edges or hot points.

Do not wrap the power cable around the

device (Danger! Risk of cable damage!).

~ Ensure that the power cable cannot be

trapped or crushed.

~ To pull the power adapter out of the

wall socket, always pull on the power

adapter, and never on the power cable.

~ Disconnect the power adapter from the

wall socket …

… if there is a fault,

… as long as you do not charge the bat-

tery,

… prior to cleaning the base station,

and

… during thunderstorms.

~ If the power cable or the device (base

station) is damaged, immediately pull

the power adapter out of the wall sock-

et.

DANGER - Danger of

explosion

~ Never throw the battery into open fire.

WARNING! Risk of material damage

~ Fasten the base station firmly to the wall.

Check whether the enclosed fixing materi-

al is suitable. If necessary, use other

screws and rawlplugs. If in doubt, have

the assembly performed by an expert.

~ Before drilling, check that there are no wa-

ter pipes or power cables in the wall at the

relevant point.

~ Only use the rechargeable vacuum cleaner

with all filters installed. Vacuuming without

the filters installed destroys the motor.

~ Never come close to hair or loose clothing

with the rotating brush.

~ Use the original accessories only.

~ Do not use any sharp or abrasive cleaning

agents.

NOTES on the battery

• Only use the original battery charger (base

station) to load the batteries.

• The battery becomes warm during the

charging process. This is normal.

4. Items supplied

1 suction device|5 with dust container|11

1 base station|26

1 power adapter|31

1 battery|33

1 suction pipe|20|

1 floorhead|22

1 small brush nozzle|36

1 large brush nozzle (rotatable)|37

1 large nozzle|38

1 adapter|39 for the small brush nozzle

and small nozzles|

1 adapter|40 for the large brush nozzle

1 drilling template

1 set of fixing material (2 rawlplugs, 2

screws)

1 copy of the user instructions

5. The base station

5.1 Fastening the base sta-

tion

Fasten the base station|26 to the wall using

the drilling template and the fixing material

included in the delivery.

NOTE:

• Before fastening, check that the fixing

material included in the delivery meets

your requirements (e.g. wall structure).

If not, replace it with suitable fixing ma-

terial.

1. Look for a place on the wall for the base

station|26. Make sure that there is a

wall socket nearby.

2. Using the drilling template, draw the

marking for the drill holes on the wall.

3. Drill holes with a diameter of 6 mm us-

ing a drill.

4. Insert the rawlplugs into the drill holes.

5. Tighten the screws in the rawlplugs.

6. Hang the base station|26 up on the

wall and check for a secure hold.

5.2 Storing after use

The base station|26 is used as a holder and

battery charger for the suction device|5 and

the suction pipe|20.

• After every use, hang

the suction device|5

and the suction

pipe|20 up in the

base station|26. The

battery is charged au-

tomatically.

• The large nozzle|38

and the large brush

nozzle|37 can be

plugged onto the

holders|30.

6. Charging the battery

NOTES:

• Fully charge the battery before using it

for the first time. This takes approx.

5hours.

• After every use, hang the suction de-

vice|5 up in the holder of the base sta-

tion|26. This ensures that the suction

device will always work at full power.

The battery is not damaged by regular

charging.

Charging the suction device via the

base station

1. Plug the power

adapter|31 into a

suitable wall socket

and connect the

power cable with

the connection for

the power adapt-

er|32.

The wall socket must continue to be easily

accessible after the device is plugged in.

|26

|20

|26

|31|32

2. After every use,

hang the suction de-

vice|5 up in the

base station|26.

The LEDs of the

charging indica-

tor|34 are lit or start

flashing. Once all

LEDs are lit, the bat-

tery is completely

charged. With a full

charge, you can use

the vacuum cleaner

for approx.

20 minutes.

Connecting the suction device

directly to the mains

The suction device does not have to be in the

battery charger for the battery to be

charged.

• Plug the power adapter|31 into a suita-

ble wall socket and connect the power

cable directly with the charging sock-

et|6 on the underside of the suction de-

vice|5.

LED signals on the base station

- Lit LEDs show the current charging state.

- Flashing LEDs show the consumed por-

tion. When all LEDs are flashing, you

should charge the battery. With an in-

sufficient charge, the device will stop

working.

LED signals during operation

- Lit LEDs show the current charging state.

- Unlit LEDs show the consumed portion.

- Only the LED above Empty is flashing:

battery weak; the device will turn off

soon.

7. Assembly

With its extensive accessories, there are nu-

merous options enabling you to react per-

fectly to almost any conceivable requirement

on a vacuum cleaner. In this section, we de-

scribe the assembly for the most frequent ap-

plications.

CAUTION:

~ During all assembly steps, the vacuum

cleaner must be switched off.

7.1 Engaging and disengag-

ing connections

There are two ways to mount and dismantle

parts.

The suction pipe|20, the floorhead|22, the

dust container|11, the filter covers|4 and

the battery|33 are inserted until they en-

gage audibly. Press the respective release

button to disengage the connections.

All other parts are pushed on and pulled off.

If necessary, slightly rotate the parts in oppo-

site directions.

7.2 Prior to every use

Prior to every use, the following parts must

be assembled:

Filter unit

The filter unit consists of:

the filter carrier|8, the

metal filter|12 and the

paper filter|7.

• Always insert the

complete filter unit

into the dust contain-

er|11.

|20

|26

|12

|14

|11

• Both small guide pins of the filter carri-

er|must fit accurately into the small

openings underneath the unlocking

mechanism|14 of the dust container.

Dust container

Only use the dust con-

tainer|11 with the com-

plete filter unit.

• Place the dust con-

tainer|11 on the suc-

tion device|5.

• Hook the bottom end

on and then push

down the upper end

until it engages audi-

bly.

Battery

The vacuum cleaner

cannot be operated

without the charged bat-

tery mounted.

• Insert the battery|33

into the battery com-

partment|1 until it en-

gages audibly.

7.3 The suction pipe

The suction pipe|20 is

used as an extension.

All parts to be connect-

ed to the clear end of

the suction pipe can

also be plugged directly

into the opening|9 at

the suction device|5.

• Insert the suction

pipe|20 into the

opening|9 until it en-

gages.

7.4 The floorhead

In many cases, you will work with the floor-

head.

You can attach the floor-

head|22 directly to the

suction device|5 or the

suction pipe|20.

• Insert the floor-

head|22 into the

opening|9 of the suc-

tion device|5 or into

the opening|21 of

the suction pipe|20.

7.5 Large nozzle

The large nozzle|38

can be inserted directly

into the suction device|5

or into the suction

pipe|20.

• Insert the large noz-

zle|38 into open-

ing|9 or|21.

7.6 Large brush nozzle

The large brush noz-

zle|37 is always used

with the adapter|40.

• Insert the adapt-

er|40 into open-

ing|9 or|21.

• Plug the large brush

nozzle|37 onto the

adapter|40.

|11 |5

|1 |33

|20

|22

|21

|20

|38

|21

|40

|21

|37

7.7 Small nozzles

The small brush noz-

zle|36 is always used

with the adapter|39.

• Insert the adapt-

er|39 into open-

ing|9 or|21.

• Plug the nozzle|36

onto the adapter|39.

8. Vacuum cleaning

CAUTION:

~ Vacuum cleaning always requires all fil-

ters and the dust container|11 to be

mounted.

1. Mount the accessories needed.

2. Insert the battery|33 into the battery

compartment|1.

Press the on/off switch |

16 to switch

the device on.

- If you would like to reduce the suction

power, press the ECO button|15

once. The button is lit green. To switch

off the function, press the button

again.

4. To switch off the device, push the on/off

switch |16 again.

5. Empty the dust container|11 and hang

up the parts in the base station|26.

8.1 Using the nozzles

In the following table, you will find an over-

view of the cleaning tasks for which the var-

ious nozzles are particularly suitable.

9. Filter and dust

container

CAUTION:

~ Vacuum cleaning always requires all fil-

ters and the dust container|11 to be

mounted.

Every operation requires the dust contain-

er|11 and all filters to be inserted:

- the metal filter|12 inside the dust con-

tainer|11,

- the paper filter|7 inside the dust con-

tainer|11,

- the motor protection filter|13 between

dust container|11 and suction device|5

and

- both exhaust air filters|2 on the sides of

the suction device|5.

|36

|21

|39

No. Nozzle Use

|36

Small

brush nozzle

Sofas, armchairs,

mattresses, furni-

ture, textiles

|37

Large

brush nozzle

Round brush:

bookshelves, hid-

den corners, floors

|38

Large nozzle Crevice nozzle:

cabinets, crevices,

corners, gaps

9.1 Dust container

• Hook the dust con-

tainer|11 on at the

bottom of the suction

device|5. Then press

it down at the top un-

til it engages.

• Remove by pressing the unlocking

mechanism|14 at the suction device

and remove the dust container|11.

9.2 Paper filter (HEPA)

The paper filter|7 is located at the upper end

of the filter carrier|8.

• Release the paper filter|7 with a slight

twist before pulling it off.

• When inserting the

filter, ensure the posi-

tion of the small later-

al pins at the paper

filter|7. They must fit

into the openings of

the filter carrier|8.

Then, lock the paper

filter|7 again.

9.3 Metal filter

The metal filter|12 is lo-

cated at the end of the

filter carrier|8. With a

slight twist, the metal fil-

ter|12 can be released

and put on again.

• To release, rotate the metal filter|12 in

the direction of the open lock symbol .

• When assembling, rotate the metal fil-

ter|12 in the direction of the closed lock

symbol . Ensure that the metal filter|12

clicks firmly into place.

9.4 Motor protection filter

Between dust contain-

er|11 and suction de-

vice|5 the motor

protection filter|13 is lo-

cated.

• Remove the dust con-

tainer|11 from the

suction device|5.

Then, you can re-

move the motor pro-

tection filter|13 from

the inside of the suc-

tion device|5.

9.5 Exhaust air filter

There are two exhaust

air filters|2 at the sides

of the suction device|5.

• To remove the filters,

press the unlocking

mechanism|3 at the

filter cover|4. Then,

you can remove the

exhaust air filter|2

from the filter cov-

er|4.

|5|14|11

|12

|13

10. Cleaning and care

DANGER!

~ Pull the mains plug out of the wall socket

before you clean the device.

~ Allow the device to cool down before

cleaning.

CAUTION:

~ All parts becoming damp or wet, must

be dried completely prior to the next

use.

~ Do not use any sharp or abrasive clean-

ing agents.

Switch off the device prior to cleaning and

remove the battery.

Cleaning of the suction device

and the battery

• Use a damp, soft cloth to clean the suc-

tion device|5, the floorhead|22 and the

battery|33.

Cleaning the nozzles (except for

the floorhead) and the exten-

sions

• The parts can be cleaned under running

water.

Cleaning of the metal filter and

the exhaust air filter

• The metal filter|12 and the exhaust air

filters|2 can be cleaned under running

water.

Cleaning of the motor protection

filter and the paper filter

• The motor protection filter|13 and the

paper filter|7 are tapped out.

Replacing the filters

• Check all filters regularly for damage or

deformations. Damaged or deformed

filters or filters that cannot be cleaned

anymore must be replaced to maintain

the full effectiveness of the vacuum

cleaner and to avoid damage to the de-

vice.

• Filter sets can be reordered (see “Order-

ing accessories” on page 14).

Cleaning the rotating brush in-

side the floorhead

1. Turn the floorhead|22 upside down.

2. Press the fastener with the double arrow

to the outside. This is a bit difficult so

that it will not disengage during vacuum

cleaning.

3. Remove the rotating brush|25 from the

floorhead|22.

4. Tap out the brush|25 slightly. Has, for

instance, hair been caught, use your fin-

gers to pull them off.

5. Reinsert the brush|25 into the floor-

head|22.

6. Press the small fastener back into the di-

rection of the brush.

11. Storage

If you do not want to use the device for ex-

tended periods, keep it in a dry location.

12. Disposal

Batteries must not be discarded with your

household waste. Spent batteries must be

disposed of properly.

This product is subject to the

provisions of European Direc-

tive 2012/19/EC. The sym-

bol showing a wheelie bin

crossed through indicates

that the product requires sep-

arate refuse collection in the

European Union. This applies to the product

and all accessories marked with this symbol.

Products marked as such may not be dis-

carded with normal domestic waste, but

must be taken to a collection point for recy-

cling electrical and electronic devices. Recy-

cling helps to reduce the consumption of raw

materials and protect the environment. For

information on disposal and the location of

the nearest recycling centre, contact e.g.

your City Cleaning Department or refer to

the Yellow Pages.

Packaging

When disposing of the packaging, make

sure you comply with the environmental reg-

ulations applicable in your country.

13. Trouble-shooting

If your device fails to function as required,

please try this checklist first. Perhaps there is

only a minor problem, and you can solve it

yourself.

DANGER! Risk of electric

shock!

~ Do not attempt to repair the device your-

self under any circumstances.

Fault Possible causes/Action

function

• Charge the battery|33.

Suction

power in-

sufficient

• Have all parts been properly

connected?

• Is one of the nozzles or suc-

tion pipe|20 clogged?

• Is the dust container|11 full?

• Is one or several filters heav-

ily contaminated?

•Does the ECO button|15

light up?

• Does the rotating brush|25

turn within the floor-

head|22?

•Battery|33 too weak?

Check the LEDs of the charg-

ing indicator|34.

Device

switches

off

• Check the battery|33.

14. Technical

specifications

15. Ordering accessories

Accessories and wearing parts for the bat-

tery-powered hand-held vacuum cleaner

SHAZ 21.6 B2 can be reordered (e.g. fil-

ters, brushes or battery packs).

Order online

shop.hoyerhandel.com

1. Scan the QR code with your smart-

phone/ tablet.

2. With the QR code you will access a

website where you can submit your re-

order.

Model: SHAZ 21.6 B2

Base station: Input: 21.6 V ,

500 mA

Battery:

(6INR19/66)

1x 21.6 V Li-Ion,

2400 mAh, (51.84 Wh)

6 cells

Power unit:

(MODEL:

TYGS-

DC2700780

/TYBS-

DC2700780)

Input: 220 - 240 V ~

50/60 Hz, 0.25 A

Output:

27 V , 780 mA

Protection class

of the power

unit: II

Operating

temperature: 10 °C to +40 °C

Technical Symbols

Subject to technical modifications.

16. Warranty of the

HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year war-

ranty starting with the purchase date. In the

event of product defects, you are entitled to

statutory rights against the vendor. These

statutory rights are not restricted by our war-

ranty presented in the following.

Warranty conditions

The warranty period starts with the purchase

date. Please keep the original purchase re-

ceipt in a safe place. This document is re-

quired to verify the purchase.

If within three years from the purchase date

of this product a material or factory defect

occurs, the product will be repaired or re-

placed by us – at our discretion – free of

charge to you. This warranty implies that

within the period of three years the defective

device and the purchase receipt are present-

ed, including a brief written description of

the defect and the time it occurred.

If the defect is covered by our warranty, the

repaired or a new product will be returned

to you. No new warranty period starts with

a repair or replacement of the product.

Warranty period and statutory

claims for defects

The warranty period is not extended when

the warranty has been claimed. This also ap-

plies to replaced and repaired parts. Any

damages and defects already existing at the

time of purchase must be reported immedi-

ately upon unpacking. Repairs arising after

the expiration of the warranty period are

subject to a charge.

Warranty coverage

The device was produced carefully according

to strict quality guidelines and tested diligent-

ly prior to delivery.

The warranty applies to material or factory

defects.

Safety isolating transformer short

circuit proof

Double insulation

Certified Safety. Devices must

comply with the generally ac-

knowledged rules of technology

and the German Product Safety

Act (Produktsicherheitsgesetz -

ProdSG).

With the CE marking, HOYER

Handel GmbH declares the con-

formity with EU guidelines.

Devices with this symbol may

only be operated indoors (dry en-

vironment).

Switched-mode power supply

This symbol reminds you to dis-

pose of the packaging in an envi-

ronmentally friendly manner.

Recyclable materials: cardboard

(except corrugated cardboard)

Direct current

Symbol for polarity

Excluded from the warranty are

wear parts subject to normal wear

and damages to fragile parts, e.g.

batteries, switches, lamps or other

parts manufactured from glass. In

particular, it does not cover the re-

placement (or repair) of brushes,

nozzles and filters.

This warranty expires if the product is dam-

aged, not used as intended or not serviced.

For the proper operation of the product, all in-

structions listed in the operating instructions

must be observed carefully. Any form of use

and handling that is advised against in the

operating instructions or warned against

must always be avoided.

The product is only intended for private and

not for commercial use. In the case of incor-

rect and improper treatment, use of force and

interventions not performed by our author-

ised Service Centre, the warranty shall cease.

Handling in case of a warranty

claim

In order to ensure prompt processing of your

matter, please observe the following notes:

• Please keep the article number

IAN: 302302

and the purchase receipt

as a purchase verification for all inquiries.

• The article number can be found on the

rating plate, an engraving, the title

page of your instructions (in the bottom

left), or as a label on the rear or under-

side of the device.

• If faulty operation or other defects occur,

first contact the Service Centre listed in

the following by telephone or email.

• Then, you are able to send a product re-

ported as defective free of charge to the

service address specified to you, includ-

ing the purchase receipt and the infor-

mation on the defect and when it

occurred.

Please visit www.lidl-service.com to

download this and many other

manuals, product videos and soft-

ware.

Service Centre

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [email protected]

Service Malta

Tel.: 80062230

E-Mail: [email protected]

Service Cyprus

Tel.: 8009 4409

E-Mail: [email protected]

IAN: 302302

Supplier

Please note that the following address is no

service address. First contact the afore-

mentioned Service Centre.

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

GERMANY

Inhalt

1. Übersicht ....................................................................................... 19

2. Bestimmungsgemäßer Gebrauch .................................................... 20

3. Sicherheitshinweise ....................................................................... 21

4. Lieferumfang ................................................................................. 23

5. Die Basisstation ............................................................................. 23

5.1 Basisstation befestigen ......................................................................... 23

5.2 Lagern nach dem Saugen ....................................................................23

6. Akku laden ................................................................................... 24

7. Montage ........................................................................................ 25

7.1 Verbindungen herstellen und lösen ........................................................25

7.2 Vor jedem Einsatz ............................................................................... 25

7.3 Das Saugrohr ..................................................................................... 26

7.4 Die Bodendüse ...................................................................................26

7.5 Große Düse ....................................................................................... 26

7.6 Große Bürstendüse ..............................................................................26

7.7 Kleine Düsen ...................................................................................... 26

8. Saugen .......................................................................................... 27

8.1 Verwendung der Düsen ....................................................................... 27

9. Filter und Staubbehälter ................................................................ 27

9.1 Staubbehälter ..................................................................................... 27

9.2 Papierfilter (HEPA) ............................................................................... 28

9.3 Metallfilter ......................................................................................... 28

9.4 Motorschutzfilter ................................................................................. 28

9.5 Abluftfilter .......................................................................................... 28

10.Reinigen und Pflegen ..................................................................... 29

11.Aufbewahren ................................................................................ 29

12.Entsorgen ...................................................................................... 30

13.Problemlösung .............................................................................. 30

14.Technische Daten ........................................................................... 31

15.Zubehörteile bestellen ................................................................... 31

16.Garantie der HOYER|Handel GmbH ................................................ 32

Page is loading ...

Silvercrest SHAZ 21.6 B2 Operating Instructions Manual

Brand: Silvercrest

Model: SHAZ 21.6 B2

Category: Vacuum cleaners

Type: Operating Instructions Manual

Download PDF

report

in other languages

Deutsch: Silvercrest SHAZ 21.6 B2

Silvercrest SHAZ 21.6 B2 Operating Instructions Manual

Silvercrest SHAZ 21.6 B2 Operating Instructions Manual

in other languages

Related papers

Other documents