Astria Fireplaces Inglenook Corner Instruction Sheet

Type
Instruction Sheet
European Copper Termination Adapter Kit Installation Instructions
Models: ECA-8 and ECA-12
Figure 1 - Constructing Chase Figure 2 - Installing Adapter Sleeve
Figure 3 - Installing Gas Separator
Parts included with this kit:
ECA-8
8" European Copper Termination Adapter Kit
• Gas Separator PN 124317-01
• Adapter Sleeve PN 20705
ECA-12
12" European Copper Termination Adapter Kit
• Gas Separator PN 20819
• Adapter Sleeve PN 110004-01
19"
MINIMUM
30"
MINIMUM
10"
MINIMUM
Adapter
Sleeve
Gas Separator
Inner Pipe of
Chimney System
Construct chase as illustrated in Figure 1. The shortest vertical side must be at least 30” high and the minimum inside dimen-
sion must be at least 19”. Top of chimney system should align with chase top. Slip adapter sleeve into inner pipe of chimney
system as shown in Figure 2. Place gas separator around adapter sleeve and secure in position by inserting tabs inside
slots as shown in Figure 3 (model ECA-8 shown).
Termination adapter kit models ECA-8 and ECA-12 must be used with the approved copper
chimney pot models listed below.
The following European copper chimney pot models are approved for use with INNOVATIVE HEARTH PRODUCTS's
8" and 12" model woodburning replaces:
• ECP1L
• ECP2L
• ECP3L
• ECP4L
• ECP5L
• ECP6L
• ECP7L
EC-O-2447-1
EC-O-2039-1
EC-O-1924-1
EC-SQ-1633-1 (8'' Wood Burning Fireplace Models Only)
EC-SQ-2144-1
EC-R-2649-1
EC-R-2036-1 (8'' Wood Burning Fireplace Models Only)
Copper Chimney Pot – King
Copper Chimney Pot – Queen
Copper Chimney Pot – Pawn
Copper Chimney Pot – Knight II
Copper Chimney Pot – Knight
Copper Chimney Pot – Bishop
Copper Chimney Pot – Bishop II
127135-01 Rev. A 03/14
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
www.IHP.US.com
P127135-01
  • Page 1 1

Astria Fireplaces Inglenook Corner Instruction Sheet

Type
Instruction Sheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI