FMI ECA-8 Operating instructions

FMI
Brand
FMI
Model
ECA-8
Type
Operating instructions

This manual is also suitable for

124318-01
Rev. A
07/08
DESA Heating, LLC
2701 Industrial Drive
Bowling Green, KY 42101
www.desatech.com
1-866-672-6040
European Copper Termination Adapter Kit Instructions
ECA-8 and ECA-12
Construct chase as illustrated in Figure 1. The shortest vertical side must be at least 30” high and the minimum inside dimen-
sion must be at least 19”. Top of chimney system should align with chase top. Slip adapter sleeve into inner pipe of chimney
system as shown in Figure 2. Place gas separator around adapter sleeve and secure in position by inserting tabs inside
slots as shown in Figure 3 (model ECA-8 shown).
19"
MINIMUM
30"
MINIMUM
10"
MINIMUM
Adapter
Sleeve
Inner Pipe Of
Chimney System
Gas
Separator
Figure 1 - Constructing Chase
Figure 2 - Installing Adapter Sleeve
Figure 3 - Installing Gas Separator
Parts included with this kit:
ECA-8
8" European Copper Termination Adapter Kit
• GasSeparator PN124317-01
• AdapterSleeve PN20705
ECA-12
12" European Copper Termination Adapter Kit
• GasSeparator PN20819
• AdapterSleeve PN110004-01
Termination adapter kit models ECA-8 and ECA-12 must be used with
the approved copper chimney pot models listed below.
The following European copper chimney pot models are approved for use with
DESA 8" and 12" model woodburning replaces:
NOTAUPC
124318 01
• ECP1L CopperChimneyPot–King EC-O-2447-1
• ECP2L CopperChimneyPot–Queen EC-O-2039-1
• ECP3L CopperChimneyPot–Pawn EC-O-1924-1
• ECP4L CopperChimneyPot–KnightII EC-SQ-1633-1
• ECP5L CopperChimneyPot–Knight EC-SQ-2144-1
• ECP6L CopperChimneyPot–Bishop EC-R-2649-1
• ECP7L CopperChimneyPot–BishopII EC-R-2036-1
  • Page 1 1

FMI ECA-8 Operating instructions

FMI
Brand
FMI
Model
ECA-8
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents