2. Symmons
  3. 4-440

Symmons 4-440 Installation guide

  • Hello! I'm your chat assistant, and I've reviewed the datasheet for the Symmons 4-440 shower head mounting bracket. This document provides detailed installation instructions, dimensions, and mounting options for the bracket, including options for ceramic tile and thick walls. I'm ready to answer any questions you might have about this product.
  • What is the thread size for the head bracket?
    How much should the 1/2" NPT supply protrude from the finish wall?
    What are the two options for mounting the bracket?
4-440
Symmons extended shower head mounting bracket with concealed back inlet.
Suffix A: Anchor plate to simplify mounting on ceramic tile
Suffix B: Back plate and thru bolts for extra thick wall
30˚
Anchor plate used for ceramic tile application—plate
screws to wall and tile is applied up to sides of plate.
Mounting bracket is mounted on nished wall with
machine screws into anchor plate
nish
wall
Head bracket threads to 1/2" NPT
1/2" NPT supply must protrude
1/2"-13mm from nish wall
Wood screws and anchors (supplied)
secure mounting bracket to wall
Standard Installation Physical Dimensions
Installation with Anchor Plate — Sux "A" Installation with Back Plate — Sux "B"
anchor plate must
be ush w/nish wall
front view of
anchor plate showing
wood screw hole locations bolts supplied for 6"-152mm wall
specify if longer bolts required
1/4"
6mm 3/4"
19mm
13/16"
21mm
1-5/8"
41mm 1-1/16"
27mm
1-1/16"
27mm
3/4"
19mm
4-5/8"
117mm
3-1/8"
79mm
3"
76mm
1/4"
6mm 3/4"
19mm
13/16"
21mm
1-5/8"
41mm 1-1/16"
27mm
1-1/16"
27mm
3/4"
19mm
Symmons Industries, Inc. • 31 Brooks Drive • Braintree, MA 02184
Phone (800) 796-6667 • Fax (800) 961-9621
Website: www.symmons.com • Email: [email protected]
©2014 Symmons Industries, Inc. Printed in U.S.A. • ZV-391 • 081114
4-5/8"
117mm
/