2. Symmons
  3. 4-445

Symmons 4-445 Installation guide

  • I've reviewed the datasheet for the Symmons 4-445 extended shower head mounting bracket. This document details the mounting options, including standard installation, and installation with anchor or back plates for different wall types. I can assist you with any questions you have regarding its installation, dimensions, or key features.
  • What is the thread size for the head bracket?
    What is included for standard installation?
    What is the purpose of the anchor plate?
4-445
Symmons extended shower head mounting bracket with exposed bottom inlet.
Suffix A: Anchor plate to simplify mounting on ceramic tile
Suffix B: Back plate and thru bolts for extra thick wall
30˚
Anchor plate used for ceramic tile application—plate
screws to wall and tile is applied up to sides of plate.
Mounting bracket is mounted on finished wall with
machine screws into anchor plate
finish
wall
Head bracket threads to 1/2" NPT
(pipe may be supplied separately)
Wood screws and anchors (supplied)
secure mounting bracket to wall
Standard Installation Physical Dimensions
Installation with Anchor Plate — Suffix "A" Installation with Back Plate — Suffix "B"
anchor plate must
be flush w/finish wall
front view of
anchor plate showing
wood screw hole locations
4-13/16"
123mm
bolts supplied for 6"-152mm wall
specify if longer bolts required
1/4"
6mm 3/4"
19mm
13/16"
21mm
1-5/8"
41mm 1-1/16"
27mm
1-1/16"
27mm
3/4"
19mm
4-13/16"
123mm
1-1/16"
27mm
3"
76mm
3"
76mm
1/4"
6mm 3/4"
19mm
13/16"
21mm
1-5/8"
41mm 1-1/16"
27mm
1-1/16"
27mm
3/4"
19mm
Symmons Industries, Inc. • 31 Brooks Drive • Braintree, MA 02184
(800) 796-6667, (781) 848-2250 • Fax (800) 961-9621, (781) 843-3849
Website: www.symmons.com • Email: [email protected]
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. • ZV-389 • 051208
/