Bedrug HLJL182DRK Installation guide

Type
Installation guide

This manual is also suitable for

JEEP JK HEADLINER INSTALLATION INSTRUCTIONS
COVERS: HLJK072DRK, HLJK074DRK, HLJK07FTK, HLJK112DRK, HLJK4DRK, HLJK11FTK
1. Read all instructions before installing.
2. Removal of the hardtop is recommended, but not required.
3. Lay parts out to check the placement of the individual panels to the corresponding position
on the hardtop.
4. Using a clean lint-free cloth, clean the attachment surface of the hardtop using isopropyl alcohol.
If the cloths become visibly soiled, replace them with clean ones.
NOTE: THE ATTACHMENT SURFACE TEMPERATURE SHOULD BE 68
O F OR HIGHER IN
ORDER FOR THE ADHESIVE STRIPS TO ACHIEVE MAXIMUM ADHESION. ALSO,
NEVER CONTAMINATE THE ADHESIVE BY TOUCHING IT WITH YOUR FINGERS.
5. Beginning at one side of each headliner panel, remove release liner from the adhesive strips
and place the panel up to the hardtop. Press firmly to ensure all the adhesive strips are thoroughly
attached to the hardtop.
6. Repeat steps 3 through 5 for the rest of the headliner panels.
7. Reinstall the hardtop, if removed.
HLJK072DRK SHOWN
(HLJK112DRK SIMILAR)
HLJK074DRK SHOWN
(HLJK114DRK SIMILAR)
HLJK07FTK SHOWN
(HLJK11FTK SIMILAR)
REMOVE PAPER RELEASE LINER FROM
AREAS SHOWN TO EXPOSE ADHESIVE
HLJKINSTAL Rev. 1 10/21/2016
Page 1 of 2
BEDRUG
®
Inc.
LIMITED WARRANTY
BedRug Inc. warrants products for Jeep vehicles for three years from the original date of purchase. Warranty is limited to
the original purchaser and is not transferable. Product is warranted to be free from defects in materials and workmanship.
The warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper
service/installation/removal, modifications, acts of God, normal wear and tear, or other causes not arising out of defective
materials or workmanship. Consequential and incidental damages are not covered under this warranty. Warranty does
not cover labor, the cost of shipping, or cost of returning the product for warranty service or inspection. The terms of this
warranty may vary from state to state. You may have rights under specific state laws that differ from the terms of this
warranty. Proof of purchase will be required for warranty service. Product should be cleaned before return. A return
authorization number must be obtained prior to returning any product. For warranty instructions, returns, and packaging
contact BedRug Inc. Customer Service at 800-462-8435.
PRODUCT REGISTRATION
Thank you for purchasing your BedRug product! We would appreciate it if you would take a few minutes to register your
purchase. Registration allows us to provide, with your permission, important updates, service information, helpful hints
or warranty service should you ever require technical support. BedRug offers the option of returning product registration
forms electronically, rather than having to fill them out by hand. You can be assured that BedRug does not share or sell
the information you provide. Save a copy of your sales receipt. Activate your warranty by registering your product online
at http://www.bedrug.com/customer-service/product-registration.html or by scanning the QR code. You will need the 6-
digit lot and date code found on the underside of the product, see label example below.
 
HLJKINSTAL Rev. 1 10/21/2016
Page 2 of 2
  • Page 1 1
  • Page 2 2

Bedrug HLJL182DRK Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI