2. ROOMS TO GO
  3. 42020381

ROOMS TO GO 42020381 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the 2038-RN dining table. This document includes a detailed parts list, a hardware list, and step-by-step assembly instructions. I'm ready to help you with any questions you may have about assembling your new dining table.
  • What is the model number of this dining table?
    What components are included in the parts list?
    What type of screws are included in this package?
Thank you for purchaseing this quality product. Be sure to check all packing material carefully for small parts.
Which may have come loose inside the carton during shipment. Identify and count all parts and compare with
the hardware list as below :
No. PictureDescription Dimension Qty
Hardware List
Parts List
No. Description Qty
1
A Table Top
Table Leg UpperB
1 Pc
12 Pcs
JCBB M8
2 Pcs
2
3
MODEL : 2038-RN
Allen Wrench M4 1 Pc
JCBC M6
Mounting Support UpperD
GlassF
ROUND TABLE, SKU# 42020381
Hardware Pack Location(s) :
Version # - 14 July 2023
Manufactured by (AXEL) for Rooms To Go ROUND DINING TABLE
SKU#42020381
A
C
F
12 Pcs
2 Pcs
Picture
Table Leg LowerC
Mounting Support LowerE
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
B
Spring Washer
Spring Washer
Assembly Step
STEP 1
After Assembly
C
3
2
Assembly the TABLE LEG by Jcbc
as illustration shown.
B
STEP 2
Assembly the TABLE SUPPORT to
TABLE LEG.
Adjust leveler to level unit
3
1
STEP 3
Assembly TABLE BASE to TABLE TOP.
STEP 4
Finally, insert the GLASS to TABLE TOP.
Note:
To ensure that the table is level, assemble the table on flat & soft surface. DO NOT tighten all the screw &
bolts until the table been adjust & level all the leg so that they do not wobble. Once adjusted then only
tighten all the screw.
D
E
A
3
1
2x 4x
8x F
/