Page is loading ...
Version/ : 2015-07-14 Rev/ 2
Factory #/Usine n
o
NANRAC
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF
SMALL PARTS, SHARP POINTS, SHARP EDGES.
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
5-Tier Industrial Rack
Please call for replacement parts or
assistance: 1-866-942-5362
Pacific Standard Time: 8:30 am – 4:30 pm
Monday to Friday
Or visit our web site:
www.whalenstorage.com
Page/ 2 Factory #/Usine n
o
NANRAC
Industrial Rack is not recommended for outdoor use./
Strongly recommend at least two adult people to assemble this unit./
Do not alter the product in any way as it could compromise the performance of the unit as
intended and will void all warranties./
To prevent tipping, always secure rack to wall. Use necessary wall mounting hardware suited for
weight of rack and potential load capacity. Hardware not included, consult your local home
improvement centre./
Parts List/
Please read completely through the instructions and verify that all parts listed are present
before beginning assembly./
Tool Required: Rubber Mallet (not provided).
A
2x
B
10x
C
5x
D
20x
SHELF MAXIMUM:
1,361 kg (3,000 lb)
EVENLY DISTRIBUTED
Failure to follow these guidelines can result in property damage or personal injuries.
Page/ 3 Factory #/Usine n
o
NANRAC
Assembly Instructions/
If you buy more than one unit, additional assembly options are
available./
A
2x
B
10x
D
20x
C
5x
Page/ 4 Factory #/Usine n
o
NANRAC
Care and Maintenance/
Use a soft, clean cloth that will not scratch the surface when dusting./
Using solvents of any kind on your product may damage the finish./
Do not use any harsh abrasives or chemicals to clean any metal surfaces as it may
damage the protective coating./
Metal will rust if the finish is scratched or if your product is exposed to excessive
humidity, particularly in salt water locations./
In case of product failure, damage or defective parts refer to:
Whalen Furniture manufacturing
1578 Air Wing Rd.
San Diego, Ca. 92154 USA
1-866-942-5362
KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
IF YOU NEED TO ORDER PARTS PLEASE USE THE LIST BELOW
Made in China
*WS-NIR-722484-5S-1-UF
Upright Frame/
* WS-NIR-722484-5S-2-CB
Cross Beam/
* WS-NIR-722484-5S-3-WD
Wire Deck/
* WS-NIR-722484-5S-4-C
Channel/
1 2 3
4
/
