2. American Standard
  3. International Patriot 13.2 Liter Toilets 091-0320

American Standard International Patriot 13.2 Liter Toilets 091-0320 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard International Patriot 13.2 Liter Toilets 091-0320 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Toilets 3.30
Eljer Plumbingware 8/01
❑ 091-0320 Vitreous China, Two-Piece, Plain-RimToilet,
Includes (131-0320) Bowl and (141-0320) Tank -
76 lbs., 4.36 Cubes
❑ 091-0321 Vitreous China, Two-Piece, Plain-RimToilet,
Includes (131-0320) Bowl and (141-0321) Insulated
Tank - 78 lbs., 4.36 Cubes
❑ 091-0325 Vitreous China, Two-Piece, Elongated-RimToilet,
Includes (131-0325) Bowl and (141-0320) Tank -
83 lbs., 4.36 Cubes
❑ 091-0326 Vitreous China, Two-Piece, Elongated-RimToilet,
Includes (131-0325) Bowl and (141-0321) Insulated
Tank - 85 lbs., 4.36 Cubes
Component Part Weights:
■ 131-0320 Plain-Rim Bowl - 40 lbs., Cubes 2.80
■ 131-0325 Elongated-Rim Bowl - 43 lbs., Cubes 2.80
■ 141-0320 Tank - 36 lbs., Cubes 1.56
■ 141-0321 Insulated Tank - 38 lbs., Cubes 1.56
Flush Actuators:
❏ 495-2120-00 White (Standard on White Tanks)
❏ 495-2120-82 Natural (Standard on Natural/Bone Tanks)
❏ 495-2120-96 Biscuit (Standard on Biscuit Tanks)
❏ 495-2121-00 Polished Chrome (Furnished with Colors Other
Than White, Natural/Bone, and Biscuit)
❏ 495-2121-04 Polished Brass (Optional)
■ 13.2 Liters (3.5 Gallons) of Water Per Flush
■ Available in Elongated-Rim or Plain-Rim
■ Close-Coupled, Two-Piece Toilet
■ Siphon Vortex Bowl with Shelf-Top Tank
■ Fully Glazed 2" Trapway
■ 12" Rough-In
■ Available in White, Platinum, Natural/Bone, Biscuit, and
Onyx
■ 12" Rough-In
Patriot 13.2L Elongated-RimToilet (091-0325)
VITREOUS CHINA
International Patriot 13.2 Liter Toilets
NOTE: Dimensions May Vary +/-
1
/
2
" and are Subject to
Change or Cancellation
Dimensions for Location of Supply are Suggested
ALL FIXTURES DIMENSIONS ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF
TOLERANCES ESTABLISHED BY ASME/ANSI STANDARDS, A112.19.2M . ALL
MEASUREMENTS SHOWN ARE SUBJECT TO CHANGE OR CANCELLATION.
3.
Water Surface 8-1/4" x 8-3/4" 9" x 8-3/4"
Trap Size 2" 2"
Trap Seal 2-3/8" 2-1/2"
Plain-Rim Elongated-Rim
CSA Certified
9/03
/