For Back-to-Back Toilet Installations
Use a 45° double
wye fitting.
Do not use a
double sanitary tee.
14-15/16"
(379 mm)
16-3/8"
(416 mm)
6"
(152 mm)
8"
(203 mm)
29-3/8" (746 mm)
2-3/4"
(70 mm)
16-1/2"
(419 mm)
1/2"
(13 mm)
12"
(305 mm)
9-3/4"
(248 mm)
15-7/8"
(403 mm)
Front of Bowl
11" (279 mm)
L of Toilet
C
3/8"
NPT
Supply
8-3/8"
(213 mm)
31-5/16"
(795 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Two-piece, Floor-mountToilet type:
For back-to-back toilet installations: Use only a
45° double wye fitting.
FloorWaste Outlet:
Elongated frontBowl shape:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
Gravity siphon jetFlush type:
2-1/8" (54 mm)Trap passageway:
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
Water Consumption
1.28 gpf (4.8 lpf)Full:
9-3/4" x 7-1/4" (248 mm x 184 mm)Water surface size:
Accessibility standards may require controls to
be located on the open side of the toilet.
6-1/4" (159 mm)Rim to water surface:
Fixture Supply Requirements
15 psi (103.4 kPa)Min static pressure:
80 psi (551.6 kPa)Max static pressure:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-20-2018 05:05
Corbelle
®
Skirted Trapway Two-Piece Toilet
K-3814