2. PROLINK
  3. PRN3001-A
PRN3001-A

PROLINK PRN3001-A User guide

  • Hello! I am an AI chatbot trained to assist you with the PROLINK PRN3001-A User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
New
New New
New PRN3001 Repea
PRN3001 RepeaPRN3001 Repea
PRN3001 Repeater Guide
ter Guideter Guide
ter Guide v.
v. v.
v.1.
1.1.
1.0
00
0
Date: 2013111
Date: 2013111Date: 2013111
Date: 20131118
88
8
*Take note this guide is only for PRN3001 with serial number
*Take note this guide is only for PRN3001 with serial number *Take note this guide is only for PRN3001 with serial number
*Take note this guide is only for PRN3001 with serial number 221501xxxxxxxxx
221501xxxxxxxxx221501xxxxxxxxx
221501xxxxxxxxx
1. Please connect a LAN cable from PRN3001 (Yellow Port) to your PC and log in
to 192.168.123.254 from your web browser.
2. Enter admin
adminadmin
admin as username and password
passwordpassword
password as
password
3. Select Repeater under Wireless, check “Repeater Enabled” box then click Site
Survey.
4. Select your main router SSID under Site Survey list and click Next
(It is recommended that your main router wireless signal is more than 50%)
5. Enter your main router wireless password, click Next.
6. Click Finish.
7. PRN3001 will takes up to 1 minute to connect to your main router. Once
successful, you can disconnect the LAN cable and start to use PRN3001 as a
wireless repeater. Please note that you will not be able to access
192.168.123.254 after the repeater configuration. To reconfigure the PRN3001,
please reset the router by pressing and hold the reset button for 7 seconds.
/