Wooden Kneeling Chair with Wheels
Instruction Manual
SKU: CHAIR-K03D
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-k03d
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
M (x2)
Allen
Wrench
STEP 1
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
250lbs
(113.40kg)
Phillips
Screwdriver
A (x6)
Short Screw
B (x4)
Medium Screw
C (x4)
Long Screw
J (x1)
Medium
Sleeve Nut
K (x2)
Long Sleeve
Nut
L (x1)
Wrench
D (x4)
Caster
E (x1)
Adjustable
Support
F (x1)
Upper Frame
G(x1)
Lower Frame
H (x1)
Seat Pad
I (x2)
Knee Pad
Insert upper frame (F) into lower frame (G)
and align front holes. Assemble frames using a
long sleeve nut (K) with x2 short screws (A) and
tighten using the Allen wrenches (M).
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
3
STEP 2
STEP 3
Assemble seat pad (H) to rear of upper
frame (F) using medium screws (B), and
knee pad (I) to front of lower frame (G)
using long screws (C). Tighten all screws
with the Allen wrench (M).
STEP 4
Assemble adjustable support (E) to rear
of upper frame (F) using a long sleeve
nut (K) with x2 short screws (A). Connect
adjustable support to rear of lower frame
(G) using medium sleeve nut (J) with x2
short screws (A). Tighten all screws using
the Allen wrenches (M).
Screw casters (D) into holes on underside of
frames (F, G) and tighten with the wrench (L).
Adjust seat height and angle by turning the knob
on the adjustable support.
LAST UPDATED: 07/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vivo CHAIR-K05B Assembly Instructions
-
-
-
-
-
-
-
-
-