Coway AQUAMEGA 100 User manual

Water Filtration System

AQUAMEGA 100

• For your safety and proper use of the product, please read this User’s Manual before use.

• Warranty card is included in this User’s Manual.

2

3

4

1

FEATURES

Tankless direct water ltration system

This is a direct water ltration system in which water passes

through lters immediately before consumption.

Power-free environmentally-friendly system

You can use this environmentally-friendly product that doesn’t require

electrical power without worrying about electricity costs.

Convenient continuous dispensing

Just turn the knob 90 degrees clockwise to continuously dispense

room-temperature water.

A small water purier with an attractive and luxurious

design

This product can be conveniently installed and be used in any

kitchen, no matter how small, with its slim and elegant design.

- Please keep the User’s Manual where it can be readily reached or found -

Thank you for using Aquamega Water purier.

Please be sure to read this user's manual to use and maintain your product correctly.

If you experience any problems during use, you can refer to this user's manual to resolve them.

This user's manual contains the product warranty, so please store it safely.

DEAR AQUAMEGA CUSTOMER,

CONTENTS

FEATURES / CONTENTS

Aquamega

FOR INFORMATION

| 03 |

SAFETY INFORMATION

About Installation

During Use

Other

| 05 |

PARTS NAME

| 06 |

WATER FILTRATION PROCESS

HOW TO USE

| 07 |

INSTALLATION PRECAUTIONS

| 08 |

HOW TO USE HYGIENICALLY

| 09 |

HOW TO USE

To drink room temperature water

MAINTENANCE

| 10 |

INSTALLATION

| 15 |

CLEANING METHOD

| 16 |

FILTER REPLACEMENT

| 17 |

FILTER REPLACEMENT

METHOD

OTHERS

| 19 |

TROUBLESHOOTING

| 20 |

SPECIFICATION

| 21 |

WATER FLOW DIAGRAM

| 23 |

PERFORMANCE DATA SHEET

| 25 |

WARRANTY CARD

2

1

SAFETY PRECAUTIONS

There is a risk of death or serious

injury if the instruction is not

followed.

There is a risk of considerable

bodily harm or physical damage

if the instruction is not followed.

There is a risk of slight bodily

harm or physical damage if the

instruction is not followed.

Danger Warning Caution

If water leaks inside the product or pools around it, lock the water supply valve,

and then contact a service center.

There is a risk of damage to the product.

Do not put candles, lighters, etc. on top of this product.

There is a risk of re.

Do not put bowls of water, chemicals, food, small metal objects, or ammable

materials on top of this product.

There is a risk of product damage if they enter the product.

Replace lters according to the lter replacement cycle to drink clean water.

If expired lters are used, water purication may be less eective.

Completely close the water lter cover inside the product before use.

Otherwise, insects or dirt may enter.

Do not install near electric heaters.

There is a risk of re.

Do not use or store combustible gases or ammable materials near this product.

There is a risk of re.

Do not excessively impact or use excessive force on this product.

There is a risk of damage to the product.

Filtration device installation/use should comply with regulations for the relevant region.

During Use

About Installation

4

3

Do not spray water directly on the device or use benzene and thinners, etc.

to wipe it during cleaning.

There is a risk of product damage.

Do not open, repair or modify the product yourself.

There is a risk of product damage.

Do not use puried water to replace water in sh tanks or aquariums.

Do not use unfamiliar water that has not been disinfected or cleansed of

microorganisms before or after using the device.

The system and installation shall comply with applicable state and local

regulations.

Cold water use only.

Other

SAFETY PRECAUTIONS | About Installation | During Use | Other

For Information

A-1 : SEDIMENT FILTER

A-2 : PRECARBON

FILTER

Water purier

body

A-3 : POSTCARBON FILTER

Front

Knob

Top cover

PARTS NAME

6

5

A1 : SEDIMENT

FILTER

A2 : PRECARBON

FILTER

A3 : POSTCARBON

FILTER

The heart of a water ltration device is its lters.

If lters are not authorized or if authorized lters are used past their life expectancy,

their performance may decrease.

WATER FILTRATION PROCESS

AQUAMEGA 100 water ltration system

A-1 : SEDIMENT FILTER

This sediment lter has the functions to remove infusible particles from feed water and to protect pre-carbon lter.

A-2 : PRECARBON FILTER

This pre-carbon lter has the functions to remove chlorine and to absorb harmful organic chemicals from feed water.

A-3 : POSTCARBON FILTER

This post-carbon lter has the functions to remove smell induction material and to improve taste of water.

*

Temporary tiny bubbles (air bubbles) may be generated due to water pressure when dispensing from a direct water device.

These air bubbles disappear naturally and do not aect water quality in any way.

*

When you boil ltered water from the device, there may be white precipitation.

This is not contamination, but rather precipitating minerals within the water.

PARTS NAME / WATER FILTRATION PROCESS

For Information

Be sure to read before use!

■

Open the connection valve.

Feed water must be supplied for the device to

work properly.

■

Regular lter replacement

Regular lter replacement is very important

to drink clean water. If you are using lters past the

end of their lifespans,

the ltration device may not work as well.

Be sure to replace lters according to their cycle.

■

After installation

Continuously dispense water for 10 minutes

before using the product for the rst time.

(Water may appear murky as bubbles are initially

dispensed with water through the lter.)

■

Installation parts

1 faucet mounted diverter, 3 faucet adapter,

1 T-valve (9/16”), 1 Drain hose, 1 6.5ft Tubing,

2 L-tting

INSTALLATION PRECAUTIONS

8

7

HOW TO USE HYGIENICALLY

Category Type Details

Period of use

When not used for

three days or longer.

• Let the water run for at least a minute to discard any possible contaminated

water that was stored for three days or longer.

How to Use

Contamination

around

the faucet (lever)

• Do not touch the faucet area with your hands, mouth, or cups you have

used.

• Self-care - Wipe the faucet with a clean, dry cloth, non-woven fabric, etc.

(Wipe once a week.)

When getting

water

• Be careful that drinks (coee, tea, carbonated beverages)/food don't splash

into the device faucet.

• If there are any contamination on the device, wipe immediately to prevent

further contamination.

Product

disassembly

• Do not disassemble or open the device at your discretion.

Product use

• Do not put anything on top of the device (there may be contamination).

Hardware Filter

• Do not install or use lters other than genuine Aquamega lters.

Maintenance

Filter replacement

cycle

• Have lters replaced and accordingly to the replacement cycle set for each

lter.

Surroundings

• Keep the device surroundings clean (avoid near trash and other possible

contaminants) so it stays in a hygienic environment.

Product

installation

Installation

environment

• Do not install in areas frequently exposed to high humidity, water, dust,

sunlight and uneven grounds.

INSTALLATION PRECAUTIONS / HOW TO USE HYGIENICALLY

How to Use

To drink room temperature water

HOW TO USE

1. Place the cup under the faucet.

2. Turn clockwise to begin dispensing water.

3. Turn counterclockwise to stop dispensing

water.

*

Make sure the the water ow is completely locked by

turning the knob to its stop position to avoid leaks.

10

9

INSTALLATION

HOW TO USE / INSTALLATION

Maintenance

Tips

Be careful!

Where to install 1

Do not install in areas frequently exposed to high humidity, water, dust, sunlight and uneven

grounds.

Where to install 2

Install on the sink as the product is counter top water purier.

After installation

Continuously dispense water for 10 minutes before using the device for the rst time.

Some of the water used for the inspection process during production may

remain inside the lter.

This product is not a secondhand product, so do not worry.

Do not reuse previously used connection valves or hoses when installing the product.

2 Options of Installation

Select installation method according to your kitchen condition.

1. Diverter Type

Connects to main kitchen faucet.

Installation Video

Visit www.cowaymega.com/instructions for video instructions

2. Adapter Type

Connects to water pipe line.

1/4" Tubing (White)

1/4" Tubing

(White)

T-valve

Diverter

1/4" Tubing (White)

1/4" Tubing

(White)

T-valve

Diverter

1/4" Tubing (White)

INSTALLATION

Part Names and Uses

1.DIVERTER TYPE

Connector Set

1

Ring Nut : The nut connected to the water

faucet (M22XP1.0)

2

Handle (Switch) :

The handle that determines the

direction of the water output.

3

Fitting :

This is the tting that connects the tubing

for water supply from faucet to the device.

4

Water Outlet : The water outlet where the

tap water comes out.

Diverter

1

3

2

4

*

The arrow lines in the gure : Represents the specications (diameter) of the water faucet.

*

The direction of the

handle is the same as

that of the water ow.

To the water purier To the water outlet

①

0.8071-28 UNF

②

0.9213-28 UNF

③

0.7205-28 UNF

< Water Flow >

1

Feed water connection

(Remove sticker before using this product.)

Second, select installation method according to your

kitchen condition between 1. Diverter and 2. Adapter type

First, connect the white tubing to the feed water

connection

1

, then connect to the diverter or T-valve.

12

11

INSTALLATION

Maintenance

INSTALLATION

TYPE

TYPE 1 TYPE 2 TYPE 3

Installation

parts

Installing

your

product

M22XP1.0

0.7205-28 UNF

③0.7205-28UNF

①0.8071-28UNF

②0.9213-28UNF

①

0.8071-28UNF

②

0.9213-28UNF

Open the water

outlet cap of the

water faucet by

turning it.

Connect

diverter to water

faucet by hand

tightening

If the provided

diverter does not

t, use diverter

adapter ③ and try

to connect again.

Fasten the ring nut

of the diverter to the

installed connector.

At this time, confirm

that the seal is properly

installed in the ring nut.

Connect the tubing

for the feed water for

the water purifier to

the fitting by inserting

it into the fitting fully.

After the installation,

operate the valve to

Connect the tubing

for the feed water for

the water purifier to

the fitting by inserting

it into the fitting fully.

After the installation,

operate the valve to

Fasten the ring nut

of the diverter to the

installed connector.

At this time, confirm

that the seal is properly

installed in the ring nut.

If the diverter

adapter ③ does

not t, use diverter

adapter

①

or

②

and connect again.

Connect the tubing

for the feed water

for the water

purifier to the

fitting by inserting

it into the fitting

fully. After the

installation, operate

the valve to check

if the valve works

properly and no

water leaks.

Open the water

outlet cap of the

water faucet by

turning it.

Open the water

outlet cap of the

water faucet by

turning it.

(1)

(2)

(3)

(1)

(2)

(3)

(4)

(1)

(2)

(3)

(4)

∗

Caution : Be sure to seal the

diverter tightly. Otherwise,

water may leak.

∗

Caution : If the seal or o-ring is

missing or the connector is not

properly installed, water may leak

∗

Caution : If the seal is missing

or the ring nut is not properly

installed, water may leak.

∗

Caution : If the seal is missing

or the ring nut is not properly

installed, water may leak.

∗

Caution : If the seal or o-ring is

missing or the connector is not

properly installed, water may leak

PUSH

TUBING

FITTING

PUSH

TUBING

FITTING

check if the valve works properly and

no water leaks.

check if the valve works properly and

no water leaks.

Faucet Diverter

The system is to be supplied with cold water only.

INSTALLATION

14

13

INSTALLATION

Maintenance

1/4" Tubing (White)

T-valve

2.ADAPTER TYPE TVALVE

FOR 9/16 inch Valve

INSTALLATION

1. Wind the Plumber’s tape on the adapter and t it to

the pipe.

2. Connect one end of the white tubing to the T-valve

and then connect the other end to the water inlet of

the device.

The adapter must be connected to the cold water

supply only.

Cleaning the faucet

Cleaning (once every 2-4 weeks)

1. Hold the product and turn the faucet

clockwise to remove.

2. Wash the faucet in clean, running water.

3. After washing, dry with a clean cloth.

4. Turn the clean faucet counterclockwise to reinstall.

Wipe with a soft, dry cloth.

*

If there is severe contamination, wipe with a damp cloth

(do not use abrasive materials).

CLEANING METHOD

16

15

Maintenance

CLEANING METHOD / FILTER REPLACEMENT

Only

 Filter

be regularly maintained and replaced. We only recommend using

 Filter replacement cycle

product will decrease.

water quality and amount of water used.

*

Filter replacement cycle based on the average daily use 1.5gal (5.7L/day).

 Filter reminder

www.cowaymega.com/reminders



water supply quality.

FILTER REPLACEMENT

Filter Replacement

AQUAMEGA 100

Filter name

Recommended replacement cycle

A-1 : SEDIMENT FILTER 6 months

A-2 : PRECARBON FILTER 6 months

A-3 : POSTCARBON FILTER 6 months

Replace the lter!

Do not push too hard. There is a risk of damage.

Lock the water supply, then turn the faucet on for about 3 seconds and then o.

Tips

1. Remove the side cover and inner lter cover and make sure to close the water supply

before removing the lters by turning the lever clockwise, otherwise it may cause

severe leakage.

FILTER REPLACEMENT METHOD

18

17

Others

FILTER REPLACEMENT METHOD

2. Remove the lter you want to replace horizontally, then replace it.

3. Close the inner lter cover and side cover.

After replacing the lter, check that the inner lter cover is completely closed

and drain the rst ltered water.

Continuously dispense water for 10 minutes before using the product after

replacing lters.

(Water may appear murky as bubbles are initially dispensed with water through

the lter.)

Tips

TROUBLESHOOTING

The product may not operate correctly for minor reasons or due to unfamiliarity with how to

use the product that are not product malfunctions. In such cases, the problem can be solved

easily without the need to resort to going to a service center if the following items are checked.

Check the following, then contact a service center if your problem remains unresolved.

Problem Check Possible Solutions

Water has a poor

aftertaste.

• The product has not been used for a long

time.

Dispense water for 2 minutes

continuously and then use.

• Is it time to replace a lter? Request a lter replacement.

Water doesn't come

out.

• Is the water supply cut o or is the

connection valve o?

Open the water connection valve.

• The faucet may be broken. Request service.

• Is it past time to replace a lter? Request a lter replacement.

There is suddenly

a low

volume of ltered

water.

• Is it time to replace a lter? Request a lter replacement.

• Is the connection valve locked? Open the water connection valve.

A leak has occurred. • Is there water owing inside the product?

Lock the connection valve and then

call the service center

Water may be murky

the rst time it is

dispensed after lter

replacement.

• Have you ushed? Flush for about 10 minutes or more.

Page is loading ...

Coway AQUAMEGA 100 User manual

Related papers

Other documents