Water Filtration Device
CHP-240N
• This product can not be used if the voltage is dierent from that mentioned in the rating plate.
• For your safety and proper use of the product, please read this User’s Manual before use.
• Warranty card is included in this User’s Manual.
FEATURES
Highly ecient 2-step water ltration system
The Nanotrap (PAC) lter reduces various foreign substances, from the feed water.
The Inno-sense lter reduces odor-inducer and improves the taste of water.
Electronic cooling system
The new electronic cooling system is eco-friendly since it no longer use refrigerant
but use electricity to cool water. Also this new system has improved the existing
noise issue by using electricity.
Easy lter replacement
This product is equipped with the type of revolutionary lter cartridge designed
to radically solve the drawbacks of conventional lter cartridges such as “time-
consuming replacement work” and “complicated lter setting”. Now, you can
replace the lters by one-touch, shortening the time for changing lters unlike
conventional ones.
Quick water heating
The internal heater is only activated when dispensing hot water. With this new quick
water heating system, more energy eciency and more hygiene is guaranteed.
Slim design
Since the product’s design is simple and slim, you can place the device wherever you
desire in your kitchen. You can place this compact sized device even in small space.
Smart indicators
The operation part displays the product’s operating status via LED indicators. Also,
the indicators lights up automatically when you touch the button. You can see and
feel the device’s function more easily. It will be helpful for you to understand your
product’s various functions.
DEAR CUSTOMERS
Thank you for purchasing a Coway water ltration device. Please read this user’s manual
thoroughly in order to use the product correctly. This manual will help you to handle problems
you may encounter while using the product. Please keep this manual at hand and the included
warranty card in a safe place.
The purpose of this product is to supply ltered hot, cold and ambient water for drinking. Our
system lters organic compounds and metallic contaminants out of feed water (tap water).
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
FEATURES / DEAR CUSTOMERS / INTENDED USE / CONTENTS
Coway
2
1
FEATURES ...........................................................01
DEAR CUSTOMERS ............................................02
INTENDED USE ..................................................02
CONTENTS ..........................................................02
SAFETY PRECAUTIONS ....................................03
PARTS NAME ......................................................07
- Operation / Indication part ...............................07
- Front / Rear view ...................................................08
WATER FILTRATION PROCESS .........................08
INSTALLATION ...................................................09
HOW TO USE ......................................................09
- To drink ambient water .......................................09
- To drink cold water ...............................................10
- To drink hot water .................................................10
- For continuous dispensing
ambient/cold/hot water .....................................10
- For preset quantity dispensing
ambient/cold/hot water .....................................10
CLEANING METHOD .........................................11
FILTER REPLACEMENT ......................................11
- Filter replacement cycle .....................................11
- Filter replacement method ...............................12
FILTER DESCALING............................................13
TROUBLESHOOTIONG .....................................15
SPECIFICATIONS ................................................ 16
WARRANTY CARD .............................................17
CONTENTS
INTENDED USE
The CHP-240N is tested and certied by WQA according to NSF/
ANSI 42 and 53.
SAFETY PRECAUTIONS
Danger : Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
• Do not use a damaged power cord or plug, and loose outlet.
• Do not unplug by pulling the cord or handle the plug with wet
hands.
• Do not run the power cord under a heavy object to prevent it
from being damaged.
• If the cord or plug is wet, unplug the unit and let it completely
dry before subsequent use.
• Unplug the unit before repair, inspection, or replacement.
• Do not plug into an outlet or power strip that is being used by
several other appliances.
• Use a separate outlet for the unit.
• Close the feed water supply valve and unplug the power cord
when not using for a long time.
• Do not attempt to repair the power cord.
• Do not repeatedly plug and unplug the unit from the electrical
outlet.
• Do not use if the cord appears to be damaged. Please ask
customer service to replace the cord.
• Reduce any dust or water on the plug.
• Never use benzene or gasoline to clean the plug.
• Do not install the unit near heaters.
• Close the feed water supply valve and plug out, then call the A/S
centre in case of any water leakage from the product.
• Do not place dishes or water containers, drugs, food, or small
metal objects on top of the product.
Be careful to keep this safety information.
Please read this information to prevent property loss
and ensure your safety.
for 220 V - 240 V use only for 120 V use only
• Immediately unplug and call the customer service centre if the
unit makes a strange noise or odd smell.
• Do not put a candle, cigarette or any other ammable object on
the product.
• Do not move the product by pulling the power cord.
• Do not spray water or wipe the product with benzene when
cleaning.
• Do not repair, disassemble, or modify.
SAFETY PRECAUTIONS
For Informations
4
3
SAFETY PRECAUTIONS
Warning : Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
• Do not turn or raise the product by holding the puried water
extraction faucet.
• Since both the hot and warm water may cause scalding, do not
touch the water at once. Failing to do so may result in burns.
• Failing to do so may result in burns.
• If the main cord is damaged, you must have it replaced by
Coway, a service centre authorized by Coway or similarly
qualied persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
• This appliance can be used by children aged from 8 years and
above.
• The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
Caution : Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or damage to the product or other
properties.
• Use or place the unit on a level area.
• When moving the product or replacing the Inno-sense lter,
black residue particles may be at the bottom of internal water
tank.
• Do not use ltered water for the water exchange of an aquarium
or a shbowl.
• Do not use with water that is microbiologically unsafe or of
Unknown quality without adequate disinfection before or after
the system.
• The ltration device installation shall comply with applicable
state and local regulations.
SAFETY PRECAUTIONS
For Informations
6
5
PARTS NAME
1
Hot water temperature indicator
The indicator lights up when the hot water
function is on. The LED is illuminated
progressively as the hot water temperature
goes up.
2
Ambient water indicator
The indicator lights up when the ambient
water function is on.
3
Cold water temperature indicator
The indicator lights up when the cold
water function is on. The LED is illuminated
progressively as the hot water temperature
goes down.
4
Check-up indicator
The indicator lights up when the problem
of product occurs. In this case, contact the
service centre.
5
Filter replacement indicator
This indicator lights up to inform the lter
replacement for NANOTRAP (PAC) and INNO-
SENSE lters.
6
Quantity indicator
The indicator shows the chosen quantity of
water. Dispensing quantity can be adjusted
as 120 cc
→
250 cc
→
500 cc
→
continuous
dispensing.
7
Extraction indicator
The indicator lights are fully illuminated when
the preset quantity is dispensed.
1
Hot button
Tap this button to dispense hot water.
2
Ambient button
Tap this button to dispense ambient water.
3
Cold button
Tap and hold this button for 2 seconds to
activate the cold mode. Then tap the button to
dispense cold water.
4
Hot water lock button
Use this button to lock or unlock hot water
dispensing.
When the hot water mode is activated, no
hot water is dispensed even if you tap the
dispense button.
5
Quantity button
Tap this button to set the desired quantity of
water. The quantity changes by each tap.
6
Dispense button
Tap this button to dispense water.
1
Hot water temperature indicator
2
Ambient water indicator
3
Cold water temperature indicator
4
Check-up
indicator
5
Filter replacement
indicator
6
Quantity indicator
7
Extraction indicator
2
Ambient button
1
Hot button
4
Hot water lock
button
5
Quantity button
6
Dispense button
3
Cold button
about 120 cc about 250 cc
about 500 cc Continuous dispensing (3 min.)
Tips
Operation / Indication part
Step 1,2 : NANOTRAP (PAC) FILTER
Step 3 : INNO-SENSE (LR) FILTER
The CHP-240N conforms to NSF/ANSI 42 and 53 for the reduction of Aesthetic Chlorine, Taste and
Odor, Particulate Class I, Lead, and Turbidity as veried and substantiated by test data.
See performance data sheet for individual contaminants and reduction performance.
1
Top cover
2
Operation part
3
Cold/Hot/Ambient water faucet
4
Drip tray grille
5
Drip tray
1
Power cord
2
Radiator grille
3
Cold water drain (OUT) port
4
Feed water (IN) port
1
2
3
4
5
2
4
3
1
Front / Rear view
The 3-step water ltration system(CHP-240N)
WATER FILTRATION PROCESS
PARTS NAME / WATER FILTRATION PROCESS
How to Use
8
7
Inlet hose
(orange)
Inlet hose
(orange)
AdapterAdapter
SealantSealant
Connection
valve
Connection
valve
AdapterAdapter
Connection
valve
Connection
valve
SealantSealant
Close
Close
Pipe sleevePipe sleeve
Tap water supply valve
Tap water supply valve
Adapter
Adapter
INSTALLATION
The total length of the entire hose set is limited to maximum 5 m. Place the drain hose lower
than the appliance. The height dierence between the drain hose and the appliance must not
exceed maximum 25 cm.
1
Close the feed water supply valve.
2
Connect the connection valve to the feed water supply valve.
3
Close the connection valve.
4
Attach the red hose to the
connection valve.
5
Open the feed water supply
valve.
6
Open the connection valve (6 c)
again and check the connection
for leaks.
7
Wash the lter with ambient water for 3 minutes in continuous dispensing mode.
8
Tap the hot button until water is dispensed from the faucet.
9
Tap the cold button until water is dispensed from the faucet.
For safe installation
Installation place
Do not install the water ltration system at a rough and dusty place,
a place where the unit is exposed to the direct sunlight or a damp
place where water drops from the roof or ceiling.
Cold water plumbing
Connect the device to the cold water pipe.
Connecting to warm water pipe might damage the lter.
Do not connect to the warm water supply under any circumstances.
hot
water
Cold water
Pipe
Tap the ambient button. Then, set the desired
quantity of water (120 cc
→
250 cc
→
500 cc
→
continuous dispensing) by tapping quantity
button. Tap the dispense button to dispense
ambient water.
In area where the turbidity is high, install the external pre-lter (WJCF11-PRE-D)
before use.
- If not, the lter replacement cycle might be shorter than anticipated.
- The electric current (A) of multiple-tab connector should be over 12 A,
connect the product on a single tab.
Tips
HOW TO USE
To drink the room water
For initial use
To activate the cold water function, tap the cold
button on the front panel for two seconds. The
cold water temperature indicator lights up.
Tap the cold button. Then, set the desired quantity
of water (120 cc
→
250 cc
→
500 cc
→
continuous
dispensing) by tapping quantity button.
Tap the dispense button to dispense cold water.
Tap the hot button. Then, set the desired
quantity of water (120 cc
→
250 cc
→
500 cc
→
continuous dispensing) by tapping
quantity button.
Tap the dispense button to dispense hot water.
Set the desired dispensing water temperature.
In the 120 cc dispensing mode, tap the quantity
button 3 times( )
(250 cc mode: 1 time, 500 cc: 2 times).
Check whether the quantity indicator is lit on.
Tap the dispense button to dispense water.
The water can be dispensed continuously for 3
minutes at maximum.
P
ress the quantity button for 5 seconds, then
tab the quantity button to set the desired preset
quantity. The chosen quantity icon blinks and the
chosen quantity of water will be dispensed when
you tap the dispense button.
If you press the quantity button again for 5 seconds
or no other button is pressed, the preset quantity
dispensing mode is automatically deactivated.
3 min.
5 seconds
To drink cold water
To drink hot water
For continuous dispensing ambient/cold/hot water
For preset quantity dispensing ambient/cold/hot water
INSTALLATION / HOW TO USE
How to Use
10
9
- When initially using the product, it takes about 2 hours for the water to be adequately
chilled.
- Take caution when dispensing hot water to avoid scalding.
- In initial use of the product, dispense 1 cup of hot water. The product heats the water
directly, so it takes a while to heat the water (hot water temperature : 25 ºC (0.5 L/min),
waiting time: 4 seconds).
Tips
Tips
CLEANING METHOD
1. Clean the main body(every 2 ~ 4 weeks)
Wipe the main body with a dry and soft cloth.
- If the grime is stubborn, wipe it away with a wet cloth.
2. Clean the drip tray
1
Detach the drip tray and grille
Gently lift up the drip tray. Then clean
the drip tray and grille under running
water with soft cloth or brush. Dry
them in shade.
2
Attach the drip tray and grille
Place the drip tray in place. Then,
place the drip tray grille on top of the
drip tray.
Replace the lters regularly. If not, the product’s water quality may be degraded.
The lter replacement cycle may vary within the range of expected cycle depending on the feed
water quality.
Part No. Filter name Expected Replacement Cycle
WJNTF6-PAC-M NANOTRAP (PAC) FILTER 238 gallons or 6 month
WJIF6-LR-M INNO-SENSE FILTER 238 gallons or 6 month
1
2
Do not clean the outside of the product by spraying water directly onto it or
using benzene or thinner.
Tips
- When the lter replacement cycle has reached its end, the lter replacement
indicator lights up to notify that the lter must be replaced.
Tips
FILTER REPLACEMENT
Filter replacement cycle
1. Close the feed water supply valve. Then, slide the top cover to reduce it. Push and hold the
button on the upper lter case. Take out the lters and lter case inside.
2. Turn the two lters respectively in
clockwise to detach the used lter. Then,
replace the new lter counterclockwise
following the lter order.
- Align the indicator with triangle when
replacing.
3. Place the replaced lter case in the
product until it clicks in place.
The red marks on the buttons indicate
that the lter case is in right place of the
product.
4. Press the ‘FILTER RESET’ button after placing the lter case in the
product.
- Press the ‘FILTER RESET’ button to light o the lter replacement
indicator.
5. Close the top cover in place. Then,
open the feed water supply valve.
Replace the lter when the lter replacement indicator blinks or lights on.
PUSH
OUT
PUSH
OUT
PUSH
OUT
PUSH
OUT
PUSH
OUT
PUSH
OUT
Filter replacement method
Use the new lter after lter replacement.
Flush the new lters to guarantee hygiene.
- Filter ushing: Wash new NANOTRAP(PAC) and INNO-SENSE lter with
ambient water for 3 minutes in continuous dispensing mode.
Tips
CLEANING METHOD / FILTER REPLACEMENT
Maintenance
12
11
FILTER DESCALING
1. Close the feed water supply valve. Then slide the top cover to reduce it. Push and hold the button
on the upper lter case. Take out the lters and lter case inside.
2. Turn the Inno-sense lter clockwise to detach it from the lter case.
Open the DE-SCALE KIT in clockwise and insert the descaler.
3. Close the DE-SCALE KIT counterclockwise, place it in lter case rst, then the lter case in the
product.
4. Open the feed water supply valve. Dispense 120 cc of ambient water, then 1.5 L of hot water in
continuous dispensing for 3 minutes. After hot water dispensing, tap the hot water lock button for
1 second.
- Refer to the p. 7 to dispense the hot water in continuous
dispensing.
Descale the lter when hot water lock button (indicator) blinks.
120 cc
1.5 L
3 minutes
Filter descaling method
5. After nishing the hot water dispensing, close the feed water supply valve. Then, take out the lter
case, detach the DE-SCALE KIT and replace the Inno-sense lter.
6. Place the lter case in the product and close the top cover.
- The red marks on the buttons indicate that the lter case is in right place of the product.
7. Open the feed water supply valve. Then, dispense the hot water (500 cc) for 1 minute.
FILTER DESCALING
Maintenance
14
13
TROUBLESHOOTING
Problem Check Possible Solutions
Poor
aftertaste
• The water ltration device has not been
used for a long time.
Get rid of the stored water and clean the internal water
tank.
• Is it time to replace the lter?
Check the lter replacement indicator and replace the
lter.
No water
comes out of
the product.
• Is the water supply cut or the water
supply valve closed?
Open the feed water supply valve.
• Has the lter not replaced at the correct
time?
Check the lter replacement indicator and replace the
lter.
• Did you install the lters in place?
After installing the lters, check the red marks on the
lter case buttons.
Low volume
of puried
water.
• Is it time to replace the lter?
Check the lter replacement indicator and replace the
lter.
• Is the power connected?
Check if the power cord is plugged into a 220 V - 240
V~ 50 Hz / 60 Hz wall outlet.
• Did you close the feed water supply
valve?
Open the feed water supply valve.
• Did the temperature of the feed water
drop suddenly?
If the water temperature has decreased, the amount of
ltrated water decreases.
No cold
water comes
out of the
product.
• Is the cold water temperature indicator
on?
Turn the cold water function on by pressing the cold
water button.
• Did you close the feed water supply
valve?
Open the feed water supply valve.
• Is the back of the water ltration device
to close to the wall?
Please keep a distance of at least 10 cm between the
back of the water ltration device and the wall.
No hot water
comes out of
the product.
• Is the hot water lock button lit on? Turn o the hot water lock function.
• Did you close the feed water supply
valve?
To prevent the heater from over-heating, the heater
function will not work if the water level is low. Open
the feed water supply valve.
• The lights of hot button and hot water
lock button have gone o after blinking
twice.
This is Auto-Safety Shut o function to prohibit the
heater’s overheating. Dispense the how water after a
while.
All operations
have
suddenly
stopped
while
operating.
• Is the feed water being supplied? Check the feed water supply valve.
• Is the power connected?
Check if the power cord of the product is plugged into
a 220 V - 240 V~ 50 Hz / 60 Hz wall outlet.
• Is water overowing or leaking? In this case, please contact the service centre.
The water ltration device may operate abnormally because the user is unfamiliar with the
product or due to some other reason and not because of a product malfunction.
In such a case, problems can be easily solved via checking the following without help from the
service centre. If the problem is not solved after checking the following, please call the service
centre.
SPECIFICATIONS
Product name Water Filtration Device
Model CHP-240N
Purifying method
NANOTRAP (PAC) + INNO-SENSE (LR)
Rated voltage 220 V - 240 V~ 50 Hz / 60 Hz
Power consumption Cool : 0.5 A, Heat : 2 500 W ~ 3 000 W
Tank
capacity
Cold water 1.35 L
Hot water Instant heating system
Ambient
water
Direct dispensing system
Total water 1.35 L
Dimensions
181 mm (W) X 420 mm (D) X 375 mm (H)
Net weight 8.5 kg
Working pressure 0.14 MPa – 0.82 MPa (20 psi ~ 120psi), Min. 3.0 L / min.
Working temperature 5
℃
- 35
℃
Climate Class T
► The water amount can be dierentiated according to the water pressure and the water temperature.
► The water tank capacity is calculated by its size, so it may be dierent from actual dispensing capacity.
► Without any prior notice, all or parts of the product are subject to change for the purpose of improving the
product performance.
► Refer to Performance data sheet for individual contaminants, reduction performance and general
operating information.
TROUBLESHOOTING / SPECIFICATIONS
Others
16
15
WARRANTY CARD OR WARRANTY LETTER
ONE YEAR LIMITED WARRANTY
ICE WATER FIRTRATION DEVICE CHP-240N(“PRODUCT”)
Model:
Serial Number:
Customer Name: (“OWNER”)
Date of Purchase:
What This Warranty Covers:
Commencing with the date of purchase of the
Product and continuing for a period of one year,
if manufacturing defects in the Product cause the
Product to not operate properly for its intended
use, then subject to the exclusions, conditions, and
limitations contained herein, COWAY at its sole
option will repair or replace the Product.
Decisions as to the extent of repair or replacement
required will be made solely by COWAY.
The remedy under this Warranty is available only
for that portion of the Product exhibiting defects
at the time of the warranty claim. The replacement
Product as well as any remaining original Product
will be warranted only for the original one year
warranty period. This limited warranty applies
only to Product used for an application specied
by COWAY for the Product and applied in strict
accordance with COWAY published specications
in eect at the time of application. IF PRODUCT IS
USED FOR OTHER THAN ITS INTENDED PURPOSE,
IT IS SOLD AS IS AND WITHOUT ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
What This Warranty Does Not Cover:
This Warranty warrants that the Product will be
free from manufacturing defects which aect the
ability of the Product to operate for its intended
use; it is not a warranty that the Product will never
require repairs or to undertake responsibilities,
liabilities or obligations other than those
specically identied in the preceding section.
COWAY is not responsible or liable for personal
injury or property damage of any kind, even if
arising from a breach of this Warranty.
Limitations and Exclusions:
TO THE EXTENT PERMITTED BY APPLICABLE LAW,
COWAY DISCLAIMS ANY OTHER WARRANTY
EXPRESS OR IMPLIED, THAN THAT GUARANTEES
FOR HEREIN. THIS WARRANTY IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES, PROVIDES,
CONDITIONS AND REPRESENTATIONS, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED CONDITIONS OR WARRANTIES AS
TO THE MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OF THE COWAY PRODUCT.
SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
COWAY DOES NOT AUTHORIZE ANY PERSON
INCLUDING ITS REPRESENTATIVES, TO MAKE ANY
REPRESENTATION OR TO OFFER ANY WARRANTY,
CONDITION OR GUARANTY IN RESPECT OF THE
PRODUCT OTHER THAN THIS WARRANTY. THIS
LIMITED WARRANTY SHALL BE THE OWNER’S
SOLE AND EXCLUSIVE REMEDY AGAINST
COWAY AND COWAY SHALL NOT BE LIABLE FOR
ANY CONSEQUENTIAL, EXEMPLARY, SPECIAL,
INCIDENTAL OR OTHER DAMAGES INCLUDING,
BUT NOT LIMITED TO, LOSS OF PROFITS, AND
LOSS OF USE. INCIDENTAL, CONSEQUENTIAL
AND EXEMPLARY DAMAGES SHALL NOT BE
RECOVERABLE EVEN IF THE REMEDIES OR THE
ACTIONS PROVIDED FOR IN THIS WARRANTY FAIL
OF THEIR ESSENTIAL PURPOSE. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. COWAY SHALL NOT BE LIABLE
FOR ANY DAMAGES WHICH ARE BASED UPON
NEGLIGENCE, BREACH OF WARRANTY, STRICT
LIABILITY OR ANY OTHER LEGAL THEORY OF
LIABILITY OTHER THAN THE EXCLUSIVE LIABILITY
SET FORTH IN THIS WARRANTY
Limitations on Implied Warranties:
Any implied warranty of merchantability or
tness for a particular purpose or use, shall be
limited to the duration of the foregoing express
written warranty.
Conditions of Warranty:
COWAY’s continuing liability under this
Warranty is conditioned upon the following :
a) The defect or damage is not caused
by or is the result of : abnormal use or
conditions; improper storage, unauthorized
modications or repair; misuse, neglect,
accident, alteration, improper installation or
other acts that are not the fault of Coway or
the manufacturer of the product or that are
not covered by the manufacturer’s warranty;
b) The Product has not been altered, modied
or repaired without prior written approval of
COWAY;
c) The OWNER has notied COWAY in writing
of any failure of the Product covered by this
Warranty within thirty (30) days following
such failure;
d) There has been no misuse, abuse or
negligence with respect to the Product on
the part of the OWNER.
Waiver:
COWAY’s failure at any time to enforce or rely
upon any of the terms or conditions stated
herein shall not be construed to be a waiver of
its rights hereunder.
Obtaining Warranty Service and OWNER’S
Duties:
If the Product fails to operate for its
intended purpose, then notify Coway or its
Representative Agency within 48 hours or
within the next business day after discovery
of any defect in the Product. The OWNER must
give written notice to COWAY no later than
thirty (30) days after a defect is discovered or
should by reasonable diligence have been
discovered. Claims under this Warranty will
require proof of purchase by the OWNER.
CO WAY
Add :
Coway co., Ltd.
136-23, Yugumagoksa-ro, Yugu-eup, Gongju-si,
Chungcheongnam-do, Korea
Tel. : 82-41-850-7879
Fax. : 82-41-841-7816
THAILAND
Add :
COWAY(THAILAND) CO., LTD.
571,R.S.U TOWER 4-5 TH FL.,SUKHUMVIT31
KLONGTON NUA, WATTANA BANGKOK,
THAILAND ZIP CODE:10110
Call center : 001-66-2-261-2610
USA
Add :
WOONGJIN COWAY USA.INC
695 S VERMONT AVE. #110, LOS ANGELES, CA,
90005
Call center. : (213) 386-9900 / (213) 480-1600
Fax. : (213) 386-3990
MALAYSIA
Add:
COWAY (M) SDN BHD
SUITE 6-3 & 6-4 LEVEL 6, WISMA UOA
NO.21 JALAN PINANG 50450 KUALA LUMPUR
kuala Lumpur
Call center : 1-800-888-112
WARRANTY CARD
Others
18
17
www.coway.com
1218762
001
MADE IN KOREA
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
3M HCD-2 Operating Instructions Manual
-
brondell H630 User manual
-
WaterLogic WL800 – MAX II Operating, Installation And Service Manual
-
-
-
Inter-m PMU-240N Operating instructions
-