2. Asus
  3. XG-C100C
XG-C100C

Asus XG-C100C Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Asus XG-C100C Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How to install the hardware of XG-C100C?
    How to install the drivers for XG-C100C?
    How to connect devices to XG-C100C through wired connection?
    What's the meaning of different colors of Speed LED?
    What's the meaning of different colors and blinking patterns of Link / ACT LED?
Fast. Easy. Setup!
1 2 3
Hardware
Installation
Driver
Installation
Wired
Connection
power cord, and open the system
cover.
Turn on your computer. Insert the
support CD into the optical drive or
download the driver from:
https://www.asus.com/Networking/
XG-C100C/HelpDesk_Download
/
Follow the onscreen instruction to
Connect devices to the RJ-45 port
on XG-C100C using Cat5e, Cat6,
Cat6a or higher network cables.
SD/M
MC/M
S
Sm
ar
t
Car
d
CF/MD
Speed LED
Link / ACT LED
Speed LED (Left LED / Dual color)
10G Green
5G / 2.5G / 1G / 100 M Yellow
Link / ACT LED (Right LED / Single color)
10G / 5G / 2.5G / 1G /
100M
Blinking Green (transferring/
receiving data)
Green
SD/MMC/MS
Sma
r
t Card
CF/MD
InstallShield Wizard
5 3 0 0 - 0 0 0 0 6 9 0 6 - 0 1 W
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Insert the XG-C100C network card into
the PCI-E network slot, ensuring that it
is completely seated on the slot.
XG-C100C 10G PCI-E Network Adapter Quick Start Guide
XG-C100C 10G PCI-E Network Adapter Guía de inicio rápido
1 2 3
Instalación del
hardware
Instalación del
controlador
Conexión
cableada
Inserte la tarjeta de red XG-
C100C en la ranura de red
PCI-E y asegúrese de que está
completamente asentada en dicha
ranura.
Apague el equipo, desenchufe el
cable de alimentación y abra la
tapa del sistema.
Encienda el equipo. Inserte el CD
de soporte en la unidad óptica o
descargue el controlador desde:
https://www.asus.com/Networking/
XG-C100C/HelpDesk_Download
/
Siga las instrucciones de la pantalla
controlador.
Conecte dispositivos al puerto RJ-
45 de XG-C100C mediante cables de
red Cat5e, Cat6, Cat6a o de categoría
superior.
SD/MMC/MS
S
mart Car
d
CF/MD
LED de velocidad
LED de enlace y ACT
LED de velocidad (LED izquierdo/color dual)
10G Verde
5G / 2,5G / 1G / 100 M Amarillo
LED de enlace/ACT (LED derecho/un solo color)
10G / 5G / 2,5G / 1G /
100M
Verde intermitente
(transmitiendo y recibiendo
datos)
Verde
SD/MMC/MS
Smart Card
CF/MD
InstallShield Wizard
/