Tripp Lite 2U User manual

Tripp Lite
Brand
Tripp Lite
Model
2U
Category
Uninterruptible power supplies (UPSs)
Type
User manual

This manual is also suitable for

Tripp Lite 2U Tower Stand

Tripp Lite 2U Tower Stand is a device designed to help you position your 2U UPS or Battery Pack safely in an upright position. It comes with two stands that you can place on the unit's side, approximately 2 inches from each end. Once the stands are in place, you can position the unit upright in a flat, stable location.

This device is particularly useful if you want to save space or if you need to position your UPS or Battery Pack in a specific location. It is also a great way to improve the airflow around your unit, which can help to extend its lifespan.

Here are some of the benefits of using a Tripp Lite 2U Tower Stand:

Tripp Lite 2U Tower Stand

Tripp Lite 2U Tower Stand is a device designed to help you position your 2U UPS or Battery Pack safely in an upright position. It comes with two stands that you can place on the unit's side, approximately 2 inches from each end. Once the stands are in place, you can position the unit upright in a flat, stable location.

This device is particularly useful if you want to save space or if you need to position your UPS or Battery Pack in a specific location. It is also a great way to improve the airflow around your unit, which can help to extend its lifespan.

Here are some of the benefits of using a Tripp Lite 2U Tower Stand:

These instructions contain important information regarding the safe installation of the
2U Tower Stands. Please read these instructions and save them for later reference.
INSTALLATION
Your 2U UPS or Battery Pack may be positioned safely in an upright
position with the addition of these Tower Stands.
1) Place the Tower Stands on the unit's side, so that the unit's fan (if
any) will face down when the unit stands upright. Position the
Tower Stands approximately 2" from each end of the unit.
2) Place the unit upright in a flat, stable location.
Español
Estas instrucciones contienen información importante
sobre la instalación segura del Soporte de Torre de 2U. Por favor lea cuidadosa-
mente y conserve estas instrucciones para su futuro uso.
INSTALACIÓN
El Banco de Baterías de 2U puede ser instalado seguramente como torre con la utilización de
estos Soportes de Torre.
1) Coloque el Soporte de Torre sobre el panel lateral de la unidad de forma que el ventilador
de la unidad (si tal ventilador existe) estará boca abajo cuando la unidad esté colocada
como torre. Coloque los Soportes de Torre aproximadamente a 2 pulgadas de distancia de
los extremos de la unidad.
2) Coloque la unidad sobre una superficie plana y estable.
Français
Ces instructions contiennent des informations importantes concernant la sécu-
rité de l’installation des Supports de Tour.Veuillez lire ces instructions et les
conservez pour référence ultérieure.
INSTALLATION
Votre système d’UPS 2U ou Groupe de Batterie peut être positionné sans risque en position
verticale avec ces Supports de Tour en supplément.
1) Placez les Supports de Tour sur le coté de l’unité, afin que le ventilateur de l’unité (si
disponible) puisse faire face contre terre lorsque l’unité se tient droite. Positionnez les
Supports de Tour à approximativement 2” de chaque extrémité de l’unité.
2) Placez l’unité verticalement dans un emplacement stable et plat.
Copyright
©
2001 Tripp Lite. All rights reserved.
Owner's Manual
2U Tower Stands
For Tripp Lite 2U UPS Systems
and 2U Battery Packs
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
93-1921 (200101159)
  • Page 1 1

Tripp Lite 2U User manual

Tripp Lite
Brand
Tripp Lite
Model
2U
Category
Uninterruptible power supplies (UPSs)
Type
User manual
This manual is also suitable for

Tripp Lite 2U Tower Stand

Tripp Lite 2U Tower Stand is a device designed to help you position your 2U UPS or Battery Pack safely in an upright position. It comes with two stands that you can place on the unit's side, approximately 2 inches from each end. Once the stands are in place, you can position the unit upright in a flat, stable location.

This device is particularly useful if you want to save space or if you need to position your UPS or Battery Pack in a specific location. It is also a great way to improve the airflow around your unit, which can help to extend its lifespan.

Here are some of the benefits of using a Tripp Lite 2U Tower Stand:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers