2. Eizo
  3. JC-100

Eizo JC-100 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Eizo JC-100 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
English
2
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING may result in
serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in
moderate injury and/or property or product damage.
Indicates an attention to be required. For example, the symbol illustrates the hazard type such
as “the risk of electric shock”.
Indicates a prohibited action. For example, the symbol illustrates a particular
prohibited action such as “Do not disassemble”.
Indicates a mandatory action that must be followed. For example, the symbol
illustrates the notication of general prohibition such as “Grounding the unit”.
Copyright© 2010 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO
CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
condential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt
of said information.
Although every effort has been made to ensure that this manual provides up-to-date information,
please note that EIZO monitor specications are subject to change without notice.
EIZO, EIZO Logo and ColorEdge are registered trademarks of EIZO NANAO CORPORATION in Japan and other
countries.
3
PRECAUTIONS
IMPORTANT!
To ensure personal safety and proper maintenance, please read this section (refer to the gure below).
WARNING
If the unit begins to emit smoke, smells like sometheing is burning, or makes strange
noises, disconnect all connections immediately and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in re, electric chock, or equipment
damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage
into the cabinet may result in re, electric shock, or equipment damage. If an object or
liquid falls/ spills into the cabinet, unplug the unit immediately. Have the unit checked by a
qualied service engineer before using it again.
Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
• Jog Dial Controller • JC-100 Control Utility Disk (CD-ROM)
• EIZO USB Cable (MD-C93) : 2 - JC-100 Control Utility
- User’s Manual
• SetupManual (This Manual)
• Overlay Sheet : 2
English
4
Controls and Functions
12 3
4 11
5 10
6 9
7 8
12
13 16
17
14 15
21, 20 19 18
18 19 20 21
Function
1 Jog Dial
Selects and changes the adjustment values of certain settings. Values
increase when this dial is turned clockwise. Values decrease when this
dial is turned counterclockwise.
2 ENTER
Determines an item on the menu screen, and saves values adjusted.
3 RETURN
Cancels changes when this switch is held down.
4 MODE
Switches the display mode (color mode).
5 SCAN
Switches the scan type at SDI signal input.
(Interlace/ Progressive/ PsF)
6 FORM
Select a signal format.
7 SDI
Switches the SDI input signal. (When SDI is connected)
(SDI-1/SDI-2/SDI-Dual(A-B)/SDI-Dual(B-A))
8 DVI/D-SUB
Switches the input signal (DVI/D-SUB) to be displayed.
（When DVI/D-SUB is connected）
9 SIZE
Changes the screen size ratio.
10 INFO
Displays the monitor information and version of the monitor and software.
11 BLACK LV
Adjusts the black level.
12 TEMP K
Adjusts the color temperature.
13 MONO
Switches to monochrome display to change the gain of the displayed
color.
14 GAIN
Adjusts the gain value.
15 LINEAR
Changes the gamma value to 1.0 and turns OFF the color temperature.
16 GAMMA
Adjusts the gamma value.
17 BRIGHT
Adjusts the brightness.
18 START
Reboots the controller after the operation mode is switched using the
FUNC switch.
19 FUNC
Switches the operation mode of the controller.
CTRL：Controls the monitor.
PROG：Customizes the unit’s settings using software.
20 USB Port
(Upstream)
Supplies power to the unit. Or customizes the unit after connecting to the
computer.
21 USB Port
(Downstream)
Connects to the monitor for operation.
5
Connecting the Signal Cable
1
Check that the power of the monitor and PC is ON.
2 Connect the controller to the PC and the monitor using USB
cables.
When the connection is completed, the ENTER button lights in blue.
Attention
• Before operation, check whether the FUNC switch is set to CTRL.
(Before setting/adjustment, check that the FUNC switch is set to CTRL.)
Note
• The PC may have to be rebooted.
• If the ENTER button does not light blue, refer to the User’s Manual on the supplied CD-ROM.
Performing Advanced Settings/Adjustments
Advanced color adjustment and various settings can be made using the controller.
For more information, refer to the User’s Manual on the CD-ROM.
USB
downstream port
USB
downstream port
USB
upstream port
USB
upstream port
• EIZO USB Cable (MD-C93)
• EIZO USB Cable (MD-C93)
Connector for
the controller
Connector for
the PC
Connector for
the monitor
English
/