Eizo CG221 User manual

 
 
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal 
Cable (D-Sub or DVI)
2-3.Connecting the Signal 
Cable (ADC)
2-4.Connecting Two PCs to 
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt 
Stand
3. ScreenManager
3-1.How to use the 
ScreenManager
3-2.ScreenManager 
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment
4-2.Displaying a low 
resolution
4-3.Color Adjustment
4-4.Power-save Setup
5. MAKING USE OF USB 
(Universal Serial Bus
6. TROUBLESHOOTING
This manual is checked under the browser settings shown 
below. Text size can change for another one through 
browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European

7. CLEANING
8. SPECIFICATION
9. GLOSSARY
APPENDIX/ ANHANG/ 
ANNEXE
FCC Declaration of 
Conformity
Recycle Auskunft / Hinweise 
zur Auswahl des richtigen 
Schwenkarms für Ihren 
Monitor

This manual uses the safety symbols below. They denote critical information. Please read them

carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious

injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate

injury and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, or otherwise, without the prior written

permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or

information confidential unless prior arrangements are made pursuant to EIZO NANAO

CORPORATION's receipt of said information Although every effort has been made to ensure

that this manual provides up-to-date information, please note that EIZO monitor specifications

are subject to change without notice.

ENERGY STAR is a U.S. registered mark.

Apple, Macintosh, Power Macintosh and Power Mac are registered trademarks of Apple

Computer, Inc.

VGA is a registered trademark of International Business Machines Corporation.

DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards

Association.

Windows is a registered trademark of Microsoft Corporation.

PowerManager is a trademark of EIZO NANAO CORPORATION.

ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO

CORPORATION in Japan and other countries.

As an ENERGY STAR

®

Partner, EIZO NANAO CORPORATION has

determined that this product meets the ENERGY STAR guidelines for

energy efficiency.

Product specifications may vary depending on the region. Confirm the specifications in the

manual written in the language of the region of purchase.

IMPORTANT!

● This product has been adjusted specifically for use in the region to which it

was originally shipped. If operated outside the region to which it was originally

shipped, the product may not perform as stated in the specifications.

● To ensure personal safety and proper maintenance, please read this section and

the caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

If the unit begins to emit smoke, smells like something is burning, or

makes strange noises, disconnect all power connections immediately

and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock,

or equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock,

or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing

covers may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the

cabinet or spillage into the cabinet may result in fire, electric shock, or

equipment damage.

If an object or liquid falls/spills into the cabinet, unplug the unit

immediately. Have the unit checked by a qualified service engineer before

using it again.

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or

equipment damage.

If the unit falls, disconnect the power immediately and ask your dealer for

advice. Do not continue using a damaged unit. Using a damaged unit may

result in fire or electric shock.

Set the unit in an appropriate location.

Not doing so may result in fire, electric shock, or equipment damage.

● Do not place outdoors.

● Do not place in the transportation system (ship, aircraft, trains,

automobiles, etc.)

● Do not place in a dusty or humid environment.

● Do not place in a location where the steam comes directly on the

screen.

● Do not place near heat generating devices or a humidifier.

To avoid danger of suffocation, keep the plastic packing bags away

from babies and children.

Use the enclosed power cord and connect to the standard power outlet

of your country.

Be sure to remain within the rated voltage of the power cord.

Not doing so may result in fire or electric shock.

To disconnect the power cord, grasp the plug firmly and pull.

Tugging on the cord may damage and result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

Use the correct voltage.

* The unit is designed for use with a specific voltage only. Connection to

another voltage than specified in this User's Manual may cause fire, electric

shock, or equipment damage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

Handle the power cord with care.

* Do not place the cord underneath the unit or other heavy objects.

* Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord

may result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user’s manual of the

arm stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to become unattached, which may result in

injury or equipment damage. When the unit is dropped, please ask your

dealer for advice. Do not continue using a damaged unit. Using a damaged

unit may result in fire or electric shock. When reattaching the tilt stand,

please use the same screws and tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal that may leak from the panel is poisonous if it enters the

eyes or mouth.

If any part of the skin or body comes in direct contact with the panel,

please wash thoroughly. If some physical symptoms result, please consult

your doctor.

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the

unit with the cord attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both

hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

* Do not place any objects on the ventilation slots.

* Do not install the unit in a closed space.

* Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in

fire, electric shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a

problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in

electric shock.

In order to suppress the luminosity change by long-term use and to

maintain the stable luminosity, use of a monitor in lower brightness is

recommended.

The LCD panel is manufactured using high-precision technology.

However, note that the appearance of any missing pixels or lit pixels does

not indicate damage to the LCD monitor.

Percentage of effective pixels:99.9994%or higher.

The backlight of the LCD panel has a fixed life span. When the screen

becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result

in damage to the screen. There will be prints left on the screen if the

pressed image is dark or black. If pressure is repeatedly applied to the

screen, it may deteriorate or damage your LCD panel. Leave the screen

white to decrease the prints.

Do not scratch or press on the panel with any sharp objects, such as a

pencil or pen as this may result in damage to the panel. Do not attempt to

brush with tissues as this may scratch the LCD panel.

When the screen image is changed after displaying the same image for

extended periods of time, an afterimage may appear. Use the screen saver

or timer to avoid displaying the same image for extended periods of time.

When the monitor is cold and brought into a room or the room temperature

goes up quickly, dew condensation may occur inside and outside the

monitor. In that case, do not turn the monitor on and wait until dew

condensation disappears, otherwise it may cause some damages to it.

Thank you very much for choosing an EIZO Color Monitor.

● The exclusive use calibration software calibrates the monitor characteristics

and generate colorprofile.

● Dual inputs compliant

● DVI Digital input (TMDS) compliant.

● ADC (Apple Display Connector) inputs compliant.

● [Horizontal scanning frequency]

Analog: 31 - 94 kHz

Digital: 31 - 76 kHz

[Vertical scanning frequency]

Analog: 49 - 86 Hz Vertical (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61

Hz)

Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz))

[Resolution] 1920 dots x 1200 lines

● Support to sRGB standard

● The height adjustable stand incorporated

● Attaching the "Adjustment Certificate" to describe the grayscale and

uniformity characteristics of the monitor individually.

Please contact your local dealer for assistance if any of the listed items are missing or

damaged.

* LCD Monitor * Calibration software

"ColorNavigator" (in the CD-ROM)* Power Cord

* Analog Signal Cable (FD-C16) * Setup Guide

* Digital Signal Cable (FD-C39) * ColorNavigator Quick Reference

* EIZO USB Cable (MD-C93) * LIMITED WARRANTY

* EIZO LCD Utility Disk * Adjustment Certificate

*User's Manual (in the CD-ROM) * Cleaning kit "ScreenCleaner"

* Hood

* Please retain the packing materials for future transference.

Front

(1)

ScreenManager

®

(2) Mode Switch

(3) Auto Adjustment Switch

(4) Enter Switch

(5) Directing Switch (Left, Down, Up, Right)

(6) Input Signal Selection Switch

(7) Power Switch

(8)

Indicator lamp

*1

Name The monitor status when each lamp on

Left Side

Custom

Custom mode of

FineContrast Mode

sRGB

sRGB mode of

FineContrast Mode

EMU

EMU mode of

FineContrast Mode

CAL

CAL mode of

FineContrast Mode

Cal. Alert

Notify that the monitor needs to be recalibrated in CAL

mode or EMU mode.

Right Side

Adj. Lock The monitor functions are locked.

Signal 1 Input signal from SIGNAL 1 is displayed.

Signal 2 Input signal from SIGNAL 2 is displayed.

ON Operation

Power Save Power saving

*1

The brightness of indicator lamps can be changed and turned off, when the

screen is displayed (Operation mode). See "Indicator setting".

The power status of the monitor when each lamp on

Indicator Lamp

Power status of the monitor

ON Power Save

Light Off Operation

Off Light Power Saving

Off Off Power off

* The unit is designed to be operated with your bare fingers. If you touch the

control panel with your gloved fingers or with something left on the control

panel, it may not work.

* If there are waterdrops or dew condensation on the control panel, or operating

with wet fingers, it may not work properly. In that case, be sure to dry or wipe it

up before use.

Rear

(9) USB Port (2 Downstream)

(10) USB Port (1 Upstream)

(11)

Height Adjustable Stand (Detachable)

*2

(12)

Security Lock Slot

*3

(13) DVI-I Input Connector (SIGNAL 1, SIGNAL2)

(14) Power Connector

*2 The LCD monitor can be used with an optional arm stand by removing the

stand. (See "

2-6. How to remove the Tilt Stand").

*3 Allows for connection of a security cable. This lock supports Kensington's

MicroSaver security system.

For further information, please consult:

Kensington Technology Group

2855 Campus Drive, San Mateo, CA 94403 USA

Tel: 800-650-4242, x3348

Intl: 650-572-2700, x3348 / Fax: 650-572-9675

http://www.kensington.com

Before connecting your monitor to the PC, change the display screen settings

(resolution and frequency) in accordance with the charts below.

* When your computer and display support VESA DDC, the suitable resolution

and the refresh rate are set by just plugging your display into the computer

without any manual settings.

Analog Input

Resolution Frequency Dot Clock Remarks

640 x 480 60 Hz

202.5 MHz

(Max.)

VGA

640 x 480 67 Hz Apple Macintosh

640 x 480 ~ 85 Hz VESA

720 x 400 70 Hz VGA TEXT

800 x 600 ~ 85 Hz VESA

832 x 624 75 Hz Apple Macintosh

1024 x 768 ~ 85 Hz VESA

1152 x 864 75 Hz VESA

1152 x 870 75 Hz Apple Macintosh

1280 x 960 75 Hz Apple Macintosh

1280 x 960 60 Hz VESA

1280 x1024 ~85 Hz VESA

1600 x 1200 ~75 Hz VESA

1680 x 1050 60 Hz VESA CVT

1680 x 1050 60 Hz VESA CVT RB (Reduced Blanking)

1920 x 1200 60 Hz VESA CVT

1920 x 1200 60 Hz VESA CVT RB (Reduced Blanking)

*

Some resolution modes may require screen adjustment.

Digital Input

The monitor supports the following resolutions only.

Resolution Frequency Dot Clock Remarks

640 x 480 60 Hz

162 MHz

(Max.)

VGA

720 x 400 70 Hz VGA TEXT

800 x 600 60 Hz VESA

1024 x 768 60 Hz VESA

1280 x 960 60 Hz VESA

1280 x 1024 60 Hz VESA

1600 x 1200 60 Hz VESA

1680 x 1050 60 Hz VESA CVT

1680 x 1050 60 Hz VESA CVT RB (Reduced Blanking)

1920 x 1200 60 Hz VESA CVT RB (Reduced Blanking)

* Be sure that the power switches of both the PC and the monitor are OFF.

1.Open the cable cover and plug the signal cable into the connector

at the rear of the monitor and the other end of the cable into the

video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Analog Input

Signal Cable Connector PC

Signal Cable (FD-C16

enclosed)

Video Output

Connector / D-Sub

mini 15 pin

Input Connector

(monitor) / DVI

Standard graphics card

Power Macintosh G3

(Blue & White)

Power Mac G4 (VGA)

Signal Cable (FD-C16

enclosed) +Adapter*

Video Output

Connector / D-Sub 15

Input Connector

(monitor) / DVI

Macintosh

*Macintosh Adapter (Optional)

Digital Input

Signal Cable Connector PC

Signal Cable (FD-C39

enclosed)

Video Output

Connector / DVI

Input Connector

(monitor) / DVI

Digital graphics card

Power Mac G4 / G5 (DVI)

2.Plug the power cord into the power connector on the rear of the

monitor.

3.Close the cable cover and lead the power cord and signal cable

into the cable holder at rear of the monitor.

* The cables are recommended to lead with slight sag for the smooth motion of the

stand.

* It's recommended to put away the signal cables into the left cable holder, and the

USB cable and power cord into the right cable holder.

4.Plug the other end of the power cord into a power outlet.

WARNING

Use the enclosed power cord and connect to the standard

power outlet of your country.

Be sure to remain within the rated voltage of the power cord.

Not doing so may result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

5.Turn on the monitor's main power and then switch on the PC's

power.

The indicator lamp, "ON", will light up.

If an image does not appear, refer to the "6. TROUBLESHOOTING" for advice.

Whenever finished, turn off the PC and the monitor.

* When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or

Digital) is displayed for a few seconds on the right top corner of the screen.

* Adjust brightness of the screen depending on the brightness of your environment.

* Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

When connecting a Power Mac G4 / G5 through ADC (Apple Display Connector),

change the input signal settings of monitor in advance to turn on the Power Mac.

* Be sure that the power switches of both the PC and the monitor are OFF.

1.Open the cable cover and plug the signal cable into the connector

at the rear of the monitor and the other end of the cable into the

video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

To input the Signal through ADC

Signal Cable Connector PC

Signal Cable (FD-C39

enclosed) +ADC-DVI

display adapter

(commercially available)

Video Output

Connector / ADC

Input Connector

(monitor) / DVI

Power Mac G4 / G5(ADC)

* ADC-DVI display adapter is required if the monitor connects to Power Mac G4 /

G5. The adapter is commercially available.

2.Plug the power cord into the power connector on the rear of the

monitor.

3.Close the cable cover and lead the power cord and signal cable

into the cable holder at rear of the monitor.

* The cables are recommended to lead with slight sag for the smooth motion of

the stand.

* It's recommended to put away the signal cables into the left cable holder, and

the USB cable and power cord into the right cable holder.

Page is loading ...

Eizo CG221 User manual

This manual is also suitable for

Eizo CG221 User manual

Related papers

Other documents