2. FUFU GAGA
  3. LJY-KF210184-01
LJY-KF210184-01

FUFU GAGA LJY-KF210184-01 User manual

  • Hello! I've read the user manual for the Cabinet and can assist you with any questions you may have about it. This document provides instructions for assembly, offers advice on preventing damage to the product and details key maintenance tasks such as cleaning and screw tightening. Feel free to ask me anything!
  • What should I use to avoid scratching the furniture during assembly?
    How often should I retighten the screws after assembly?
    What is the recommended method for cleaning the product?
Version:07/21/2022
Cabinet
1/16
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/16
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
A x 58
Ø6 x 34mm
B x 50
Ø15 x 12mm
C x 12
Ø6 x 83mm
Ø4 x 16mm Ø4 x 30mm
D x 21
E x 32 F x 44 G x 20 H x 34
J x 4 K x 1L x 8M x 64
Ø3.5 x 14mm
Ø8x30mm
300mm
Ø3x12mm
150mm 150mm
Ø15 x 10mm
3/16
7
14
2
1
3
4
614
5
4/16
815
11
12
13
10
13
12
915
10
11
x 4
1
2
A x 2
Ø6 x 34mm
2
1
A
A
A
A
2
A
A
A x 2
Ø6 x 34mm
5/16
Insert quickfit screw(A) into corresponding
holes in board 1 with screwdriver as shown.
Please don't use an electric screwdriver
or use force to rotate, may cause crack.
Insert quickfit screw(A) into corresponding
holes in board 2 with screwdriver as shown.
Please don't use an electric screwdriver
or use force to rotate,
may cause crack.
3
4
A x 4
Ø6 x 34mm
AA
AA
A
M x 16
Ø3.5 x 14mm
L x 4
300mm
M
M
M
M
M
M
M
M
M
M
M
M
CL
CR
3
4
3
4
M
M
CL
CR
M
M
M
M
56224
CL
3
CR
CR
CR
CL
CL
CL
56 224
CR
4
6/16
Insert quickfit screw(A) into board 3 and 4
with screwdriver as shown.
Please pay attention to the holes
where the accessories are inserted.
Fix slide rail(CL) and (CR) to board 3 and 4
respectively with screw(M) as shown.
5
5
6
M
M
M
M
MM
MM
M
5
M x 16
Ø3.5 x 14mm
L x 4
300mm
BB
4
7
B x 2
Ø15 x 12mm
M
M
CL
CL
CR
CR
CR
CR
CL
CR
D x 1
Ø8 x 30mm
D
39 224
29224
a
5a5b
b
CR
CL
CL
CL
M
M
M
M
M
M
M
7
4
180°
7/16
Fix slide rail(CL)
and (CR) to both
sides of board 5
with screw(M) as shown.
Attach board 4 to plank 7 with wooden dowel(D)
and turn cam locks(B) clockwise to tighten as shown.
7
8
H x 2
Ø4x30mm
B
B
B x 2
Ø15 x 12mm
5
4
7
7
5
4
6
A x 2
Ø6 x 34mm
A
A
A
A
BB
H
H
HH
6
5
5
180°
8/16
Attach board 5 to plank 7 with
wooden dowel(D) and screw(H) as shown.
Attach plank 6 to board 5 with quickfit
screw(A) and turn cam locks(B) clockwise
to tighten as shown.
9
10
5
47
6
3B
B
B x 2
Ø15 x 12mm
4
5
7
6
31
1
C x 6
Ø6 x 83mm
C
C
C
B
BB
B
B
B
B
B
B
B
B
B x 14
Ø15 x 12mm
D x 2
Ø8 x 30mm
D
D
BC
C
C
B
3
6
180°
C
B
180°
9/16
Attach board 3 to plank 6
and turn cam locks(B)
clockwise to tighten as shown.
Insert screw(C) into board
3 and 4 at first,
then turn 90°.
Cover board 1 to the component with
screw(F) and wooden dowel(D),
turn cam locks(B) clockwise
to tighten as shown.
11
12
4
5
7
63
2
2
C
C
C
B
BB
B
B
B
B
B
B
B
B
1
C x 6
Ø6 x 83mm
B x 14
Ø15 x 12mm
F x 44
Ø3x12mm
F
F
F
F
F
F
FF
F
FFFF
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
D x 2
Ø8 x 30mm
D
D
F
F
C
C
C
B
B
F
C
B
180°
10/16
Insert screw(C)
into board 3 and 4
at first, then turn 90°.
Cover board 2 to the
component with screw(F) and
wooden dowel(D), turn cam locks(B)
clockwise to tighten as shown.
Fix back board 14 to with screw(F) as shown.
13
14
J x 4 K x 1
150mm
150mm
G
G
K
G x 20
Ø4x16mm
K
J
J
J
J
G
G
GG
G
G
G
G
G
GGG
G
G
G
G
J
GG
G
G
G
G
GG
11/16
Fix leg(J) to bottom of board 2 with screw(G).
Fix leg support(K) to board 2 with
screw(G) as shown.
15
16
H x 32
Ø4x30mm
x 8
A
D
10
12
15
11
x 8
A x 8
Ø6 x 34mm
D x 8
Ø8 x 30mm
13
11
10
12
15
11
12
12/16
Attach board 10 ,11 to board 12 with screw(H).
Attach board 15 to board 12 with quickfit screw(A)
and wooden dowel(D) as shown.
Slide board 13 into available slots as shown.
17
18
A
C
E
E
A
A
A
A
E
E x 4
A x 20
Ø6 x 34mm
D x 4
Ø8 x 30mm
E x 16
Ø15 x 10mm
11
10
12
8
A
C
E
E
A
A
A
A x 4
A x 20
Ø6 x 34mm
D x 4
Ø8 x 30mm
E x 16
Ø15 x 10mm
E
E
11
10
12
9
13
13
E
E
A
A
E
E
A
A
180°
180°
13/16
Attach board 8 to the component with quickfit screw(A)
and turn cam locks(E) clockwise to tighten as shown.
Attach board 9 to the component with quickfit screw(A)
and turn cam locks(E) clockwise to tighten as shown.
B
B
B x 16
Ø15 x 12mm
x 4
15
10
13
19
20
B
B
x 4
x 4
9
15
11
13
8
M
M
M
M
DL
DR
10
15
13
8
DL
M
DL
M
B
180°
M x 16
Ø3.5 x 14mm
L x 8
300mm
14/16
Lock board 15 with cam locks(B) as shown.
Fix runner(DR) and (DL) to board 11 and 10
respectively with screw(M) as shown.
21
22
M x 16
Ø3.5 x 14mm
M
M
M
M
L x 8
300mm
DL
DR
10
15
13
8
9
x 4
x 4
9
M
DL
M
DL x 4
15/16
Fix runner(DR) and (DL) to board 11 and 10
respectively with screw(M) as shown.
23
24
9
8
9
8
9
8
9
8
9
8
9
8
9
8
9
8
9
8
9
8
9
8
9
8
16/16
Align rails, put all drawers.
No.8 drawers must are in left, No.9 drawers must are in right.
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please call us.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS
/