2. FUFU GAGA
  3. LJY-KF250019-01
LJY-KF250019-01

FUFU GAGA LJY-KF250019-01 User manual

  • Hello! I am an AI chatbot trained to assist you with the FUFU GAGA LJY-KF250019-01 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Version:06/02/2022
Sideboard
1/15
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/15
3/15
1
16
16
64
5
3
7
8
7
2
17
17 9
9
10
11
14
13
12
15 12
14
13
11
15
11
14
13
12
4/15
A x 24
∅6 x 34mm
B x 12
∅15 x 12mm
C x 12
∅8 x 30mm
D x 20
E x 10 F x 12
∅4x 30mm
G x 8
∅35mm
H x 4
J x 24 K x 2 L x 40 M x 3
N x 3
∅15 x 10mm
∅4*16mm
M4*18mm
∅4x 40mm ∅5x 16mm
CL
CR
DL
DR
P x 3
300mm ∅4*14mm
R x 28
S x 4
150mm
T x 1 U x 20
∅4*16mm
150mm
Q x 1
∅3*12mm
80*44*15mm
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
1
2
R
R
5
6
CR
CL
CL
CL
CR
CR
3
5
6
4
AA
B
B
D
D
E
E
A x 2
∅6 x 34mm ∅8 x 30mm
D x 2
B x 2
∅15 x 12mm
E x 2
∅4x 40mm
7
7
CL
CR
DL
DR
P x 3
300mm
∅4*14mm
R x 12
R
R
R
R
R
R
R
RR
R
R
P
E
A
D
B
B
180°
D
A
P
P
P
P
P
P
Insert quickfit screw(A) to part 3 and part 4 at first.
Connect part 4 with part 7 with wooden pin(D), turn
cam locks(B) clockwise to tighten as shown. Attach
5/15
part 6 to part 7 using screw(E).
Connect part 3 with part 7 with
wooden pin(D), turn cam locks(B)
clockwise to tighten as shown.Attach
part 5 to part 7 using screw(E).
Fix slide rail(CL) and (CR) to part 5
and part 6 using screw(R) as shown.
Do not use an electric screwdriver, do not use force during
the rotation of the accessories, otherwise it may cause the
board to crack
3
4
3
5
6
47
7
8
A
D
B
B
D
A
A x 2
∅6 x 34mm ∅8 x 30mm
D x 2B x 2
∅15 x 12mm
R x 4 K x 2
∅4*14mm
1
R
K
R
K
R
80*44*15mm
A
D
B
180°
AD
R
K
6/15
Insert quickfit screw(A)to part 5 and part 6 at first.
Connect two assembled components with
part 8 with wooden pin(D), turn cam locks(B)
clockwise to tighten as shown.
Fix part(K) to part 1 using screw(R)
as shown.
5
6
3
5
6
4
1
A
D
B
D
AB
B
B
D
D
A
A
A
A
A
A
D
D
D
D
3
5
6
4
2
1
E
D
D
D
D
E
E
E
E
E
E
E
A x 8
∅8 x 30mm
D x 8B x 8
∅8 x 30mm
D x 8 E x 8
∅4x 40mm
A
D
180°
BD
A
7/15
∅6 x 34mm ∅15 x 12mm
Insert eight quickfit screw(A) to part 1.
Cover part 1 to the component with
wooden pin(D), turn cam locks(B)
clockwise to tighten as shown.
Hammer two wooden pin(D)
to part 3,5, 6 and 4 at first.
Cover part 2 to the component,
fix by using screw(E) as shown.
7
8
3
2
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
LL
2
3
16
16
S
U
T
S
S
S
U
U
U
U
U
UU
S x 4
150mm
T x 1 U x 20
∅4*16mm
150mm
L x 40
∅3*12mm
L
L
S
UU
16
16
8/15
Attach two part 16 to the back
of unit using screw(L)
as shown.
Fix leg(S) to part 2 using
screw(U), fix leg support(T)
to the middle of part 2 using
screw(U) as shown.
9
10
3
1
17
17
G
G x 8
9
9
J
J
J
J
H
HH
H
∅35mm
H x 4 J x 8
∅4*16mm
JH
9/15
G
∅5x 16mm
Insert part(G) to the side of
part 3, 5, 6 and 4 at first.Put
part 17 as shown.
Fix hinge(H) to part 9 using screw(J)
as shown.
11
12
9
1
4
J
J
J x 8
∅4*16mm
3
1
9
9J
J
10/15
Attach part 9 to part 3 fixing hinge
with screw(J) as shown.
J x 8
∅4*16mm
Attach part 9 to part 4 fixing
hinge with screw(J) as shown.
14
13
3
1
9
9
11
12
13
FF
F
F
F x 12
∅4x 30mm
x3
11/15
Just press the door, it will pop up.
Connect part 11 and 12 to part
13 using screw(F) as shown.
15
16
14
11
13 12
11
13 12
14
15
A
A
C
N
M
C
N x 2
M4*18mm
M x 2
C x 8
A x 8
∅6 x 34mm ∅15 x 10mm
C
C
A
A
A
12/15
x2
Fix handle(M) using screw(N).
Attach part 15 to part 11 and 12,turn cam locks(B)
clockwise to tighten as shown.
Insert part 14 into available
slots of part 11, 12 and 13.
x3
Insert quickfit screw(A) to part 15.
17
18
10
11
13 12
14
A
A
C
N
M
R
R
R
R
DR
DL
14
15
12
C x 4
∅15 x 10mm
A x4
∅6 x 34mm
N x 1
M4*18mm
M x 1
CL
CR
DL
DR
P x 2
300mm
x2
R x 8
∅4*14mm
C
P
P
P
P
R
R
A
13/15
and 11 using screw(R) as shown.
Fix slide rail(DR) and (DL) to part 12
Fix handle(M) using screw(N).
Insert quickfit screw(A) to part 10.
Attach part 10 to part 11 and 12,turn cam locks
(B)clockwise to tighten
as shown.
19
20
R
R
R
R
DR
DL
14
10
12
CL
CR
DL
DR
P x 1
300mm
R x 4
∅4*14mm
14/15
P
P
P
R
R
P
and 11 using screw(R) as shown.
Align the rails,
put all drawers.
Fix slide rail(DR) and (DL) to part 12
21
22
15/15
Q x 1
1 PCS
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem,if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please consult our FAQ section at [email protected] as there
may be a simple solution to the issue.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS
/