Diebold Nixdorf BA9x User manual

BA92/BA93/BA93W

LDC TFT Panel Display

Mounting Options Manual

We would like to know your opinion on this publication.

Please send us a copy of this page if you have any constructive criticism.

We would like to thank you in advance for your comments.

With kind regards.

Diebold Nixdorf Pte Ltd

Research and Development

151 Lorong Chuan

New Tech Park #05-01A/B

Singapore 556741

Order-No.: 01750262784 D

Your Opinion:

BA92/BA93/BA93W

LDC TFT Panel Display

Mounting Options Manual

Edition June 2018

BA92/BA93/BA93W Mounting Options Installation Manual

All brand and product names mentioned in this document are trademarks of their respective owners.

The reproduction, transmission or use of this document or its contents is not permitted without

express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are re-

served.

Delivery subject to availability; technical modifications possible.

BA92/BA93/BA93W Mounting Options Installation Manual

Contents

Introduct ion ................................................................................... 1

About This Manual.......................................................................... 1

Unpacking And Checking the Delivery Unit ...................................... 1

Desktop stand ................................................................................ 2

lnstalling the display to a stand ....................................................... 2

Preparing the stand ........................................................................ 2

Preparing the display ...................................................................... 3

Installing the stand ......................................................................... 4

Dimensions (in mm) ........................................................................ 7

BA92 with desktop stand ........................................................ 7

BA93 with desktop stand ........................................................ 8

BA93W with desktop stand .................................................... 9

Dual Display ................................................................................. 10

Dual display adapter ..................................................................... 11

Installing a second display to a main display .................................. 13

Dimensions (in mm) ...................................................................... 20

BA90 as second display on BA92........................................... 20

BA90 as second display on BA93........................................... 20

BA90 as second display on BA93W ....................................... 21

BA92 as second display on BA92........................................... 21

BA92 as second display on BA93........................................... 22

BA92 as second display on BA93W ....................................... 22

BA91W as second display on BA92 ....................................... 23

BA91W as second display on BA93 ....................................... 23

BA91W as second display on BA93W .................................... 24

Pole Mount .................................................................................. 25

Dimensions (in mm) ...................................................................... 31

BA92 with pole mount bottom mounted ............................. 31

BA93 with pole mount bottom mounted ............................. 32

BA93W with pole mount bottom mounted ........................... 33

BA92 with VESA100 pole mount .......................................... 34

BA93 with VESA100 pole mount .......................................... 35

BA93W with VESA100 pole mount ....................................... 36

BA92/BA93/BA93W Mounting Options Installation Manual 1

Introduction

This manual describes the installation of the following mounting options:

Desktop stand

Dual Display Adapter

Pole Mount

About This Manual

This manual informs you about everything you might need to know for the

installation of the mounting options of your BA9x.

Notes in the manual are marked by this symbol.

This symbol is used for warnings.

Unpacking And Checking the Delivery Unit

Unpack the parts and check to see whether the delivery matches the

information on the delivery note. The delivery comprises the respec-

tive screen module. Data cables, necessary for operation, can be or-

dered separately. lf damage has occurred during shipping or if the

package contents do not match the delivery note, immediately inform

your Diebold Nixdorf sales outlet.

Transport the device only in its original packaging (to protect it

against impact and shock).

BA92/BA93/BA93W Mounting Options Installation Manual 2

Desktop stand

The BA9x desktop stand offers maximum stability for touch application with a small

footprint at the POS.

lnstalling the display to a stand

Take the stand and the monitor out of the packaging. For installation you

will need a Torx screwdriver to loosen and tighten the screws!

Preparing the stand

From the stand:

1. Remove the base

cover.

2. Remove the back

cover.

3. Remove the VESA

cover.

BA92/BA93/BA93W Mounting Options Installation Manual 3

Preparing the display

1. Place a piece of protection

sheet on a flat surface e.g.

a table.

2. Lay the display face down

on the protection sheet.

3. Tighten the four screws

half way through.

4. Remove the cable cover at

the bottom of the display.

5. Plug in cable.

6. Place back the cable cover

at the bottom of the dis-

play.

7. Pull the cable through the

opening of the cable cov-

er.

BA92/BA93/BA93W Mounting Options Installation Manual 4

Installing the stand

1. Bring the display into a posi-

tion above the stand.

2. Place the screws (that were

previously tightened half-

way through) in the two U-

shaped grooves on the

frame of the stand.

BA92/BA93/BA93W Mounting Options Installation Manual 5

3. Tighten the four Torx screws

to secure the display to the

stand.

4. Place in the VESA cover.

BA92/BA93/BA93W Mounting Options Installation Manual 6

5. Place in the back cover,

routing the cable through

the bottom.

6. Place in the base cover. The

installation is complete.

When uninstalling the stand always make sure that all cables are

disconnected.

BA92/BA93/BA93W Mounting Options Installation Manual 7

Dimensions (in mm)

BA92 with desktop stand

BA92/BA93/BA93W Mounting Options Installation Manual 8

BA93 with desktop stand

BA92/BA93/BA93W Mounting Options Installation Manual 9

BA93W with desktop stand

BA92/BA93/BA93W Mounting Options Installation Manual 10

Dual Display

As a dual screen solution, it is possible to mount a second display to the back of

the main display with the help of a dual display adapter.

Overview of possible combinations:

Main display

(with desktop stand)

BA92

BA93

BA93W

Second display

BA90 or BA92

or BA91W

BA92/BA93/BA93W Mounting Options Installation Manual 11

Dual display adapter

You will need a dual display adapter to install a second display to the main

dispaly. The dual display adapter kit (WN part number: 01750261948)

consists of the following parts:

Part Description Quantity

Main bracket 1

Hinge assembly 1

Cover 1

Right and left plates 2

VESA bracket 1

Countersunk screw

M3x6 (black) 8

BA92/BA93/BA93W Mounting Options Installation Manual 12

Preparing the VESA bracket for 100 x 100 mounting

The VESA bracket provided with the dual display adapter kit is designed

for 75x75 mounting. You will need to add in the right and left plates for

100x100 mounting.

Follow the following steps to install the right and left plates to the VESA

bracket:

1.

Place

the left and right

plates (1) on the VESA

bracket (2).

2.

Attach two screws (provi

d-

ed in the dual display

adapter kit) at the top and

tighten.

BA92/BA93/BA93W Mounting Options Installation Manual 13

Installing a second display to a main display

Take the dual display adapter kit and the main display out of the packag-

ing. For installation you will need a Torx screwdriver to loosen and tighten

the screws!

Follow the following steps to install :

1.

Place a piece of

prote

c

tion

sheet (1) on a flat surface

e.g. a table.

2. Lay the main display (2)

face down on the protec-

tion sheet.

3. Remove the two screws (3)

at the top.

4. Loosen the two screws (4)

at the bottom.

5.

Break away slot hole

for

cables VESA cover.

BA92/BA93/BA93W Mounting Options Installation Manual 14

6.

Secure the

VESA bracket

to

the second display.

There are two types of

VESA mounting: 75x75 and

100x100.

For 75x75 mounting, slide

in the VESA bracket and se-

cure the four scews

For 100x100 mounting,

slide in the VESA bracket

(pre-installed with the left

and right plates) and tight-

en the four scews

7.

Mount the main di

s

play

(1)

onto the stand. Connect

the cables for the mainn

display and route them

below the display.

8. Route the cables for the

second display between

the main display and the

stand as indicated by the

arrow.

Page is loading ...

Diebold Nixdorf BA9x User manual

This manual is also suitable for

Diebold Nixdorf BA9x User manual

Related papers

Other documents