Logicbus BD BD5 User guide

BD BD5
Brand
Logicbus
Model
BD BD5
Type
User guide

This manual is also suitable for

Logicbus BD BD5 is a compact and versatile DC motor drive designed for a wide range of applications. It offers precise speed and acceleration/deceleration control, as well as the ability to reverse the direction of the motor. The BD5 is easy to set up and use, with on-board potentiometers for adjusting speed and acceleration/deceleration. It also features built-in protection against overcurrent, overvoltage, and overheating. With its compact size and powerful performance, the BD5 is an ideal choice for applications such as robotics, automation, and medical equipment.

Logicbus BD BD5 is a compact and versatile DC motor drive designed for a wide range of applications. It offers precise speed and acceleration/deceleration control, as well as the ability to reverse the direction of the motor. The BD5 is easy to set up and use, with on-board potentiometers for adjusting speed and acceleration/deceleration. It also features built-in protection against overcurrent, overvoltage, and overheating. With its compact size and powerful performance, the BD5 is an ideal choice for applications such as robotics, automation, and medical equipment.

BD
BD5/10 Quick Setup Guide
Requirements
To begin, make sure you have the following equipment:
Step 1
Wire the drive to the DC power source. Note, the BD5/10 accepts DC power from 12-48V.
(Do not apply power until all connections to the drive have been made.)
External (Line) Fuse Criteria
For all DC supply currents up to 9A (this includes peak values) use a 12A fast-blo fuse.
For all currents above 9A (this includes peak values) use a 15 A fast-blo fuse.
The internal fuse is not user-replaceable, if tripped, the unit must be returned for repair.
See the BD5/10 Hardware Manual for more details.
920-0066C
+DC
-DC
To Earth Ground
Grounding
Screw
FUSE
LINE FILTER
(OPTIONAL)
Locate an optional line filter adjacent
to the drive for full CE compliance
Step 2
3
340
±20
6
±1
L
1.5
±1
20
15
5.5
±0.1
BRUSHLESS DC MOTOR
BL105-H03-G
4500r/min
Ins.Class E
MADE IN CHINA
No.xxxxxx
YY-MM-DD
IP40
24VDC
6.25A
105W
0.225N·M
0
-
±0.1
0.025
42
37.6 h7
4- 3.5
±0.1
±0.1
50
90°
6
- 0.006
0
Motor Length (L)
BL030-H03-G 46mm
BL060-H03-G 70mm
BL105-H03-G 100mm
Connect the motor to the drive.
BD5/10 matched motors ship with 12” terminated connectors that will plug directly into the drive. If
your motor is located out of reach of the standard cables, you may use an Applied Motion Products
extension cable.
(Do not connect the motor to the load until initial testing has been completed.)
▪ A compatible motor.
▪ A small screwdriver for tightening the connectors (included).
▪ An I/O cable and connectors (included).
920-0066C
Step 3
1
3
5
7
9
11
13
15
17
2
4
6
8
10
12
14
16
18
INCOM
AGND
AIN
FLT
-
SPO
-
SPO+
FLT+
GND
5V
M2
M1
M0
STMD
SPST
EN/RE
CW/CCW
5V
STP
CN4
ACC/DEC
SPD
▪Ensure that DIP switch 1 is ON and 2 is OFF (to use internal power supply
for I/O). Note, it may be necessary to remove the external cover to access
the internal DIP switches. It may also be possible to access these switches
by carefully reaching through the slots with the small screw driver that is
included.
▪Speed and accel/decel settings are controlled by on-board
potentiometers, adjustable using the included screwdriver.
▪Apply power to the drive.
▪TESTING: To start the motor spinning, connect STP (pin11, black/white)
to GND (pin2) and adjust the SPD pot to the desired speed. To reverse
direction, connect CW/CCW (yellow) to GND (pin2).
ACC/DEC
SPD
Step 4
Your drive is now wired for use.
For further details on I/O and general operation please consult the BD5/10 Hardware Manual,
available at http://www.applied-motion.com/support/manuals.
  • Page 1 1
  • Page 2 2

Logicbus BD BD5 User guide

BD BD5
Brand
Logicbus
Model
BD BD5
Type
User guide
This manual is also suitable for

Logicbus BD BD5 is a compact and versatile DC motor drive designed for a wide range of applications. It offers precise speed and acceleration/deceleration control, as well as the ability to reverse the direction of the motor. The BD5 is easy to set up and use, with on-board potentiometers for adjusting speed and acceleration/deceleration. It also features built-in protection against overcurrent, overvoltage, and overheating. With its compact size and powerful performance, the BD5 is an ideal choice for applications such as robotics, automation, and medical equipment.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents