2. VitalConnect
  3. MKT-161

VitalConnect MKT-161 User guide

  • Hello! I am an AI chatbot trained to assist you with the VitalConnect MKT-161 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
MKT-161 Rev. G (March 2022)
QuickStart Guide
for Cardiac Monitoring
This guide describes how to use the VitalPatch® biosensor
and VistaPhone for at-home cardiac monitoring.
• The VitalPatchis worn on the chest to measure and
record your vital signs and heart rhythms.
• The VistaPhonesends data from VitalPatch to your care
team for monitoring.
Wear the VitalPatch at all times during the monitoring period
and keep the VistaPhone near you.
For detailed instructions and warnings, refer to IFU-06,
VitalPatch Instructions for Use and IFU-26,VistaPoint
Instructions for Use. You can view these by tapping the
Menu button on the VistaPhone and then tapping Help.
Customer Support
1-800-219-3000
VitalPatch VistaPhone Care Team
Unpacking and Charging VistaPhone
If you have not already done so, remove the VistaPhone
charger and cable from the package labeled “VistaPhone.”
Keep all packing materials.
Use only the provided USB-C cable and charger for your
VistaPhone. Keep the device plugged into the charger at
night while you are sleeping. You can use the VistaPhone
while it is charging. Look at the battery indicator in the status
bar. Do not let the VistaPhone battery run out.
Turning the VistaPhone On and Off
The VistaPhone should always be ON when you are wearing
a VitalPatch. The screen will go to sleep (but device will
remain ON) after a period of inactivity.
• ToTurnON:Press Power Key until the device vibrates
and the screen lights up. To check if ON, tap the screen.
• ToUnlock:Swipe across the screen with your nger and
then enter PIN code 1234.
• ToTurnOFF: Press and hold the Power Key until the
Options menu displays, and then select Power O.
Checking Cloud Connection
Keep the VistaPhone in a place with a strong cell phone
signal. If the screen shows  CloudConnectionLost , move the
VistaPhone to a location with a better signal.
Section 1: Using the VistaPhone
CALL911ifyouarehavinganemergency!
Section 2: Applying the VitalPatch
To see an instructional video, tap the Menu button, tap
Help, and then tap VitalPatchApplication.
1. Prepare Upper-Left Chest
a. If a previous VitalPatch is still applied, remove it rst.See
Section7onpage4.
b. If there is body hair on the site, shave the site before
cleaning. Prepare an area larger than the VitalPatch. See
gure to the right.
c. Clean site with an alcohol wipe and allow to dry.
Prepare
upper-left chest
in this location
LEFT
Side
Power
Key
VitalPatch
Status
Cloud
Connection
Status
Insert charge
cable here
Report
Symptom
VistaPhone
Battery
Status
Menu Menu
VitalPatch
Hours
Remaining
109
Mobile Device
92%
5:45 PM
Report Symptom
VitalPatch ID
012792
Vital Signs
Uploading
Body Contact
Good
Device Name
Del-Boca-Vista-347
Cloud Connection
Good
Device ID
d27a
Data Storage
Good
2
2. Remove from Pouch and Power-On
a. Tear open pouch at the notch and remove VitalPatch.
b. Allow the VitalPatch to “breathe” for at least 2 minutes
before proceeding to the next step.
c. Place VitalPatch on a at surface. Press and release the
power button. A green light below the logo will ash
when VitalPatch is powered on (the light will go o).
3. Hold Against Chest
a. Hold the VitalPatch against the chest in the position
shown in the gure to the right.
b. Space two ngers below the jugular notch (dip at the
base of the neck).
c. Position diagonally with the threelines angled
downward away from the midline.
4. Remove Backings and Apply
DONOTtouchtheadhesivewithyourngers!
a. Hold one side of the VitalPatch down.
b. Lift the opposite side, and peel the backing o from the
center. Press against skin.
c. Peel the backing o from the other side of the VitalPatch.
d. Firmly press down both sides to attach to skin.
5. Optional Adhesive Overlay
If your care team recommends an adhesive overlay, please
review the instructional video. Go to the Menu button, tap
Help, and then tap VitalPatchAdhesiveOverlay.
• DONOT shower or exercise for 30minutes after
applying the VitalPatch.
• DONOT expose the VitalPatch directly to the shower
head, and avoid excessive contact with soap or
scrubbing. Gently pat the VitalPatch dry after showering.
• DONOT swim with the VitalPatch or use in a sauna,
steam room or hot tub.
• DONOT wear more than one VitalPatch at a time.
Remove the old VitalPatch before applying a new one.
VitalConnect
Light ashes ON
Press and
release power
button
Peel o
backing
from center
Hold
VitalPatch
down
VitalConnect
Midline
LEFT
Side
LEFT
Hand
Section 4: Pairing with VistaPhone
1. Begin the Pairing Process
a. Tap ConnectVitalPatch button.
b. Tap SearchforVitalPatchID to search for nearby
VitalPatch biosensors. A list will of IDs will display.
c. Tap the Bluetooth ID of your VitalPatch. If the Bluetooth
ID does not appear in the list, tap the Rescan button to
repeat the search. If the VitalPatch is still not listed, press
the power button on the VitalPatch again and tap the
Rescan button.
Note:If a previous VitalPatch is still connected, disconnect it
before pairing (see Section6onPage3).
Select ID from list
Connect to VitalPatch
Search for VitalPatch ID
How do you want to connect?
VC2B008BF_003C3C
VC2B008BF_0014D2
Section 3: Wearing the VitalPatch
• EachVitalPatchwilllastupto7days(168hours).
To preserve data recorded by the VitalPatch, make sure
you are connected to the VistaPhone before the
VitalPatch expires.
• If discomfort or irritation occurs, the VitalPatch should be
removed. Contact your care team immediately.
• If the VitalPatch begins to fall o or lift from the skin,
contact your care team immediately.
3
Check VitalPatch Hours
To check the status of your VitalPatch, look for the “hours
remaining” on the screen. Replace the VitalPatch when it
expires (or as directed by your care team).
Check VitalPatch Status
• If the screen shows Vital Signs  Not Uploading , make sure
the VistaPhone and VitalPatch are near each other.
• If the screen shows Body Contact  Not Good , check that
the VitalPatch is adhered to the skin. If the patch appears
to have lifted o, contact Customer Support (1-800-219-
3000) for additional guidance.
Report Symptoms
If you feel a symptom, do the following:
a. When it is safe to do so, unlock the VistaPhone and tap
the ReportSymptom button.
b. From the list of options, tap one or more symptom(s) to
select. Tap Other if the symptom is not listed.
Tap Next.
c. If you selected Other as a symptom, you will be asked to
enter a description of the symptom(s). Enter the
information and tap Next.
d. Tap the activity level (Low, Medium or High) that you
experienced when the symptom occurred. Tap Send
Symptom when complete.
2. Select Patch Position
Select the Primary position image and then tap Next.
3. Select Body Position
• StandingorSitting (preferred) — Sit as upright as
physically capable.
• Elevated — Lie on a bed elevated at an angle of 30°.
• Supine — Lie down as at as possible.
Remain still in the current body position and tap Calibrate.
Conrm selections when prompted.
After calibration, the screen will display a dashboard with
VitalPatch and connection status.
VitalPatch
Hours
Posture Calibration
Step 1 Select Patch Position
Next >
Secondary
Primary (preferred)
Posture Calibration
Step 2 Select Current Body Position
Calibrate
< Back
Bed is Flat
Supine
Bed Angle 30°
Elevated
(preferred)
Standing or Sitting
Anxious/Panic
Report a Symptom
What did you feel?
(select one or more)
Heart racing
Heart fluttering
Heart skipping beats
Shortness of breath
Dizzy or lightheaded
Chest pain
Fainted
Other Next
Anxious/Panic
Report a Symptom
What was your activity level
when you felt the symptom?
Low
Sitting or resting
Medium
Standing or moving
High
Exercising
Back Send Symptom
Section 5: Daily Activities During Monitoring
Each VitalPatch will last up to 7 days. If your monitoring
period is longer than 7 days, replace the VitalPatch as
follows just prior to expiration:
a. Tap the Menu button and then tap DisconnectPatch.
b. Tap the DisconnectVitalPatchandcontinue
monitoringpatientbutton.
c. Remove the VitalPatch. See Section7onPage4.
d. Apply a new VitalPatch. See Section2onPage1.
Section 6: Replacing the VitalPatch
Disconnect VitalPatch
and continue
monitoring patient.
Disconnect Patch
Menu
4
Return Using Padded Envelope
Return Using Shipping Box
Section 7: Removing VitalPatch
Section 8: Return the Monitoring Equipment
Before removing the VitalPatch, disconnect the VitalPatch
from the VistaPhone. See Section6onPage3.
1. If Overlay Was Used, Peel off
a. Grasp a corner of the overlay and peel it o the skin.
b. Continue pulling the overlay o. Stretch the overlay
horizontally to help release it from the skin. The
VitalPatch may pull o with the overlay.
2. Peel off VitalPatch
a. Wipe an adhesive removal pad along the edge of the
VitalPatch.
b. Grasp a corner of the VitalPatch and peel it o the skin
while sweeping the adhesive removal pad underneath.
c. Dispose the VitalPatch according to local laws for routine
electronic waste.
d. Clean skin with an alcohol pad and allow to dry.
3. Apply New VitalPatch
If your monitoring period is longer than 7 days, replace the
VitalPatch. See Section2onPage1. If your monitoring
period is nished, see Section8below.
You must return the equipment when monitoring is
complete. Failuretoreturnmaydelaytestresultsand
youwillreceiveabillforthecostofthedevice.
Use the following procedure to return:
a. Discard used VitalPatch biosensors, alcohol wipes, and
adhesive removal pads.
b. Gather the phone, charger, charge cable and any
unused VitalPatch biosensors (in their original,
undamaged pouches).
c. If your care provider wants you to return the equipment
directly to them, return equipment to their oce.
Discard the shipping box.
d. If the monitoring kit includes return shipping labels:
–Place the equipment in the original shipping box or
padded return envelope.
–Ifusingabox, close the box and tuck in the ap.
Seal the box closed using the provided clear
circular stickers.
–Ifusinganenvelope, seal the envelope.
–Check that UPS Return Label is visible.
–Drop o the box or envelope at any UPS shipping
location. To schedule a pick-up, contact UPS at
1-800-742-5877. Inform UPS that you have a
pre-paid label.
–Save the tracking number from the return label for
your records.
Sweep adhesive
removal pad
Peel O
VitalPatch
VitalConnect
Grasp a corner of the overlay and
stretch horizontally to remove
VitalConnect, Inc.
2870 Zanker Rd, Suite 100, San Jose, CA 95134 | (408) 963-4600 | www.vitalconnect.com | [email protected]
© 2022 VitalConnect. A list of our trademarks can be found at www.vitalconnect.com. All other marks may be trademarks of their respective companies.
Tuck in
the ap
UPS Return
Label
UPS Return Label
(underneath)
Stickers
/