2. Phoenix Gold
  3. ZDSKV3
ZDSKV3

Phoenix Gold ZDSKV3 User guide

  • Hello! I've reviewed the user manual for the Phoenix Gold ZD series ZDSKV3 Speaker installation. It provides detailed instructions on how to install this speaker system in a Volvo S80, including the necessary tools and step-by-step procedures for removing the old components and installing the new ones. I'm ready to answer any questions you might have about the installation process or features of this car audio system.
  • What vehicle is this installation guide for?
    What tools are needed for installation?
    What is the first step in the installation?
    What kind of screwdriver is needed for the installation of the Phoenix Gold Speaker?
1
ZDSKV3
Installation Tools Required
2
T25 Screwdriver 10mm Wrench Plastic Pry Tool
Vehicle used for installation:*
Volvo S80 2006 - 2011
Performance Sound System
*Some differences may occur between different car and
year models.
5mm Drill
ZDSKV3 Installation 1
Tools required:
3
1. Front door panel removal 2. Remove the tweeter pod
3. Disconnect the tweeter connector 4. Remove the screw cover
1x Plastic Pry Tool
ZDSKV3 Installation 2
Tools required:
4
5. Unscrew the two screws 6. Remove the door panel (pull)
7. Lift the door panel up 8. Remove the door connectors
1x T25 Screwdriver 1x Plastic Pry Tool
ZDSKV3 Installation 3
Tools required:
5
9. OEM Speaker 10. Disconnect the speaker connector
11. Drill out the OEM speaker 12. Take out the nuts and bolts
1x Drill 5mm
ZDSKV3 Installation 4
Tools required:
6
13. Insert the bolt 14. Screw on the nuts from the back
15. Connect the speaker harness 16. Route the cable into the adapter
2x 10mm Wrenches / Sockets
ZDSKV3 Installation 5
Tools required:
7
17. Connect the Phoenix Gold speaker 18. Screw the speaker in place
19. Fasten the filter and cables 20. Take out the tweeter and foam ring
1x PH2 Screwdriver
ZDSKV3 Installation 6
Tools required:
8
21. Put the tweeter in the foam ring 22. Drill out the OEM tweeter
23. Tweeter removed
Make a little cut and peel off the
protective film
24.
1x Drill 5mm
ZDSKV3 Installation 7
Tools required:
9
25. Press the tweeter into place 26. Add the foam plate
27. Separate these cables (-2dB TW) 28. Connect the speaker harness
ZDSKV3 Installation 8
Tools required:
10
29. Fasten the filter and cables 30. Reassemble the door in reverse
31. Mount the tweeter pod 32. Installation is now complete
11
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
/