Cool Knight-02

Aiwa Cool Knight-02 User manual

  • Hello! I am an AI chatbot trained to assist you with the Aiwa Cool Knight-02 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Cool knight -02 User Manual
品规格说明:
一:按键功能:
1 :左键 2:中键 3:右键 4DPI+ 5 DPI- 6 :前进 7:后退
8:实心后盖 10:洞洞后盖
二:技术参数:
型号:Cool knight -02 连接方式:有线, 无线 2.4G 鼠标按键:7
DPI 值:1000/2000/3200/4800/6400/12000
加速度:20G IPS:60inch/s
回报率:250HZ-500HZ-1000HZ 灯光模式:13
灯光模式切换:RGB1680 万色
驱动:带驱动,可宏定义,自定义。
三:其它说明:
此鼠标后盖采用磁吸设计,8号实心后盖和 10 号洞洞后盖进行互换。
Product Specifications
Button function:
1 : Left button
2: Middle button
3: Right click
4: DPI+
5 DPI-
6: Forward
7 : Back
8: Solid back cover
10: The back cover of the hole
Technical Parameters:
Model: Cool knight -02
Connection method: wired, wireless 2.4G
Mouse buttons: 7 keys
DPI value: 1000/2000/3200/4800/6400/12000
Acceleration: 20G IPS: 60inch/s
Rate of return: 250HZ-500HZ-1000HZ
Lighting Mode: 13 kinds
Lighting mode switching: RGB 16.8 million colors
Drive: belt drive, macro definition, custom.
Other instructions:
The back cover of this mouse adopts a magnetic design, and the No. 8
solid back cover and the No. 10 hole back cover are interchangeable.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC ID: 2A4BF-CB02
/