method
1
In order to upgrade your projector, please follow the method described below in section 2, 3 & 4.
•Youwillneedamemory/USBsticksetupwithaFAT-lesystemtoperformthisupgrade
2
download
•AccesstheupgradesoftwarefromtheQSPEVDFSTweb-QBHF
•Downloadandsavethe010.rmware.ziple toyourPCdesktop
•Unzipandextractthermwarele(release.tar) totherootofaUSBmemorystick
PS! Important that USB is safely removed from computer, using the eject function on your PC
3
upgrade
finished
Quick Start Guide
SW upgrade
Please refer toUIFQSPEVDFST website to download to required files or seek other information
4
•Settheprojectorinstandbymode
•Insertthememorystickintheprojectorandwaitafewseconds
•TheLCDdisplaywillindicatethatithasdetectedanupgradeleonthememorystick
•RemovethememorystickwhentheLCDdisplayinstructsyoutodoso
•Donotremovethepowercordwhiletheupgradeisstillinprogress
•Theprojectormayrestartseveraltimesduringtheupgrade
TheupgradehasnishedsuccessfullywhentheordinaryLCDdisplayreturns,asshowninpicture.
4