Grizzly G9952 Owner's manual

Grizzly
Brand
Grizzly
Model
G9952
Type
Owner's manual

This manual is also suitable for

Grizzly G9952: This light-duty bender will easily and quickly form sheet metal up to 22 gauge. It's perfect for a variety of projects, including forming ductwork, flashing, and other sheet metal components. The G9952 is easy to set up and use, and it comes with a one-year warranty.

Capabilities:

  • Bends sheet metal up to 22 gauge
  • Creates bends up to 90 degrees
  • Can be used to form a variety of shapes, including curves, angles, and channels
  • Ideal for projects such as ductwork, flashing, and other sheet metal components

Features:

  • Sturdy steel construction
  • Precision-ground bending blade

Grizzly G9952: This light-duty bender will easily and quickly form sheet metal up to 22 gauge. It's perfect for a variety of projects, including forming ductwork, flashing, and other sheet metal components. The G9952 is easy to set up and use, and it comes with a one-year warranty.

Capabilities:

  • Bends sheet metal up to 22 gauge
  • Creates bends up to 90 degrees
  • Can be used to form a variety of shapes, including curves, angles, and channels
  • Ideal for projects such as ductwork, flashing, and other sheet metal components

Features:

  • Sturdy steel construction
  • Precision-ground bending blade
Introduction
This light-duty bender will easily and quickly form
sheet metal up to 22 gauge.
Setup
1. The unpainted surfaces are coated with a
waxy oil to protect them from corrosion during
shipment. Remove this protective coating with
a solvent cleaner or citrus-based degreaser
such as Grizzly’s G7895 Degreaser.
2. This bender MUST be mounted to a work
bench or stan
d before using.
3. Insert the handles into the pins (see Figure
1).
MODEL G9951/G9952
18" & 30" MINI MIGHTY
BENDER
INSTRUCTION SHEET
Figure 1. Identification.
Figure 2. Completed bend.
If you need help with your new bender, call our
Tech Support at: (570) 546-9663.
COPYRIGHT © SEPTEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8559 PRINTED IN CHINA
Always wear safety
glasses when setting up
or using bender!
Operation
1. Lower the moving plate so it is parallel to the
workbench.
2. Mark the desired location of your bend on the
workpiece.
3. Position the workpiece so the mark is aligned
with the back edge of the support plate (the
seam where both plates meet).
4. Clamp the press plate on the workpiece
using two to four C-clamps (see Figure 2).
C-clamps are not included. Use the lead
-
ing edge of the press plate for sharp, crisp
bends or turn the leading edge over for softer,
smoother bends.
5. With steady even movement and pressure, lift
the handles together to bend the workpiece
to the desired angle as shown in Figure 2
.
Handle
Pin
Moving Plate
Support Plate
Press Plate
G9951/G9952 Parts Breakdown and List
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 P9951001 STAND 1 P9952001 STAND
2 P9951002 SUPPORTING PLATE 2 P9952002 SUPPORTING PLATE
3 P9951003 PRESS PLATE 3 P9952003 PRESS PLATE
4 P9951004 MOVING PLATE 4 P9952004 MOVING PLATE
5 P9951005 PIN 5 P9952005 PIN
6 P9951006 HANDLE LEVER 6 P9952006 HANDLE LEVER
7 P9951007 HANDLE BALL 7 P9952007 HANDLE BALL
  • Page 1 1
  • Page 2 2

Grizzly G9952 Owner's manual

Grizzly
Brand
Grizzly
Model
G9952
Type
Owner's manual
This manual is also suitable for

Grizzly G9952: This light-duty bender will easily and quickly form sheet metal up to 22 gauge. It's perfect for a variety of projects, including forming ductwork, flashing, and other sheet metal components. The G9952 is easy to set up and use, and it comes with a one-year warranty.

Capabilities:

  • Bends sheet metal up to 22 gauge
  • Creates bends up to 90 degrees
  • Can be used to form a variety of shapes, including curves, angles, and channels
  • Ideal for projects such as ductwork, flashing, and other sheet metal components

Features:

  • Sturdy steel construction
  • Precision-ground bending blade
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents