GE ZIC30GNHII Template

Type
Template

This manual is also suitable for

4 Places
0.350” Routing
0.350” Routing
0.350” Routing
ART IS CORRECT IN SIZE AND SCALE WHEN
LINE LENGTH IS CORRECT
6.0”
0.350” Routing
Routing is required in shaded areas only
Glass Door Template
Warning: Before drilling holes for brackets, please make
sure they do not line up with thin areas on the panel.
7. Max window opening is 33-3/8” x 23”. Window opening may be smaller if desired.
8. Wood panels must be at least 3/4” thick at hook and bracket locations.
9. 0.350” routing needs to extend to edge of window opening.
MAX WINDOW OPENING
MAX WINDOW OPENING
31-46543-2 (A)
Warning: Before drilling holes for brackets, please make
sure they do not line up with thin areas on the panel.
ART IS CORRECT IN SIZE AND SCALE WHEN
LINE LENGTH IS CORRECT
6.0”
ART IS CORRECT IN SIZE AND SCALE WHEN
LINE LENGTH IS CORRECT
6.0”
Warning: Before drilling holes for brackets, please make
sure they do not line up with thin areas on the panel.
4 Places
ART IS CORRECT IN SIZE AND SCALE WHEN
LINE LENGTH IS CORRECT
6.0”
Warning: Before drilling holes for brackets, please make
sure they do not line up with thin areas on the panel.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

GE ZIC30GNHII Template

Type
Template
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI