Interlogix NS3552-8P-2S-V2 User manual

NS3552-8P-2S-V2 User

Manual

P/N 1073552-EN • REV B • ISS 25JAN19

Copyright

©

Interlogix is part of UTC

Climate, Controls & Security, a unit of United Technologies

Corporation

. Specifications subject to change without notice.

Trademarks and patents

Trade names used in this document may be trademarks or registered trademarks of the

manufacturers or vendors of

the respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Version

This document applies to

NS3552-8P-2S-V2.

FCC compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

mus

t accept any interference received, including interference that may cause undesired

operation.

FCC compliance

Class A:

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in acc

ordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at hi

s own expense.

Canada

This Class A digital apparatus complies with CAN ICES

-003 (A)/NMB-3 (A).

Cet appareil numérique de la classe A est conforme à la norme CAN ICES

-003

(A)/NMB

-3 (A).

ACMA compliance

Notice!

This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

Certification

EU directives

This product and

- if applicable - the supplied accessories too are marked with "CE" and

comply

therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19

/EU (WEEE directive): Products marked with this symbol cannot be disposed of

as unsorted municipal waste in the

European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see:

www.recyclethis.info.

Product warnings and

disclaimers

THESE PRODUCTS ARE INTENDED FOR SALE TO, AND INSTALLATION BY, AN

EXPERIENCED SECURITY PROFESSIONAL. UTC FIRE & SECURITY CANNOT

PROVIDE ANY ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS

PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER”

OR “AUTHORIZED

RESELLER”

, IS PROPERLY TRAINED OR EXPERIENCED TO CORRECTLY INSTALL

SECURITY RELATED PRODUCTS.

For more information on warranty disclaimers and product safety information, please

check www.firesecurityproducts.com

/policy/product-warning/ or scan the following code:

Contact information and

manuals/ tools/ firmware

For contact information and to download the latest manuals, tools, and firmware, go to the web

site of your region.

Americas: www.interlogix.com

EMEA: www.firesecurityproducts.com

Manuals are

available in several languages

Australia/New Zealand: www.utcfs.com.au

NS3552-8P-2S-V2 User Manual 1

Content

Important information 4

Chapter 1 Introduction 5

Package contents 5

Product description 5

Product applications 9

Product features 10

Product specifications 14

Chapter 2 Installation 19

Hardware description 19

Installing the industrial managed switch 26

Cabling 29

Chapter 3 Switch management 35

Requirements 35

Management access overview 35

CLI mode management 36

Web management 38

SNMP-based network management 38

Chapter 4 Web configuration 40

Main web page 42

System 43

DHCP server 67

UDLD 79

Simple Network Management Protocol (SNMP) 81

Port management 91

Link aggregation 98

VLAN 106

Spanning Tree Protocol (STP) 131

Multicast 149

Quality of Service (QoS) 172

Access Control Lists (ACL) 195

Authentication 209

Security 243

MAC address table 259

LLDP 265

Network diagnostics 278

Loop protection 283

RMON 285

Ring 294

Power over Ethernet (PoE) 307

Port identification 319

2 NS3552-8P-2S-V2 User Manual

Chapter 5 Command line interface 320

Accessing the CLI 320

Telnet login 320

Chapter 6 Command line mode 321

System Command 322

IP Command 328

Port Management Command 334

MAC Address Table Command 338

VLAN Configuration Command 341

Private VLAN Configuration Command 348

Security Command 350

Spanning Tree Protocol Command 396

Link Aggregation Command 405

Link Aggregation Control Protocol Command 407

LLDP Command 410

LLDP MED Command 414

Thermal Command 418

PoE Command 419

Ethernet Virtual Connections Command 420

Ethernet Protection Switching Command 425

Maintainence entity End Point Command 426

Quality of Service Command 433

Mirror Command 446

Configuration Command 447

Firmware Command 448

UPnP Command 448

MVR Command 450

Voice VLAN Command 453

Ethernet Ring Protection Switching Command 458

Loop Protect Command 462

IPMC Command 464

VLAN Control List Command 472

SMTP Command 476

DIDO Command 478

Show Command 482

Chapter 7 Switch operation 487

Address table 487

Learning 487

Forwarding and filtering 487

Store-and-forward 487

Auto-negotiation 488

NS3552-8P-2S-V2 User Manual 3

Chapter 8 Troubleshooting 489

Appendix A Networking connection 491

Glossary 493

4 NS3552-8P-2S-V2 User Manual

Important information

Limitation of liability

To the maximum extent permitted by applicable law, in no event will UTCFS be liable

for any lost profits or business opportunities, loss of use, business interruption, loss of

data, or any other indirect, special, incidental, or consequential damages under any

theory of liability, whether based in contract, tort, negligence, product liability, or

otherwise. Because some jurisdictions do not allow the exclusion or limitation of liability

for consequential or incidental damages the preceding limitation may not apply to you.

In any event the total liability of UTCFS shall not exceed the purchase price of the

product. The foregoing limitation will apply to the maximum extent permitted by

applicable law, regardless of whether UTCFS has been advised of the possibility of

such damages and regardless of whether any remedy fails of its essential purpose.

Installation in accordance with this manual, applicable codes, and the instructions of the

authority having jurisdiction is mandatory.

While every precaution has been taken during the preparation of this manual to ensure

the accuracy of its contents, UTCFS assumes no responsibility for errors or omissions.

Advisory messages

Advisory messages alert you to conditions or practices that can cause unwanted

results. The advisory messages used in this document are shown and described below.

WARNING: Warning messages advise you of hazards that could result in injury or loss

of life. They tell you which actions to take or to avoid in order to prevent the injury or

loss of life.

Caution: Caution messages advise you of possible equipment damage. They tell you

which actions to take or to avoid in order to prevent damage.

Note: Note messages advise you of the possible loss of time or effort. They describe

how to avoid the loss. Notes are also used to point out important information that you

should read.

NS3552-8P-2S-V2 User Manual 5

Chapter 1

Introduction

The description of the IFS NS3552-8P-2S-V2 model is as follows:

 Industrial L2+ 8-port 10/100/1000T 802.3at PoE

 + 2-port 100/1000X SFP managed switch

Unless specified, the term “industrial managed switch” mentioned in this user manual

refers to the NS3552-8P-2S-V2.

Package contents

Open the box of the industrial managed switch and carefully unpack it. The box should

contain the following items:

 The industrial managed switch × 1

 Quick installation guide × 1

 DIN rail kit x 1

 Wall mounting kit x 1

 RS232 console cable x 1

 SFP dust-proof cap x 2

 RJ45 dust-proof cap x 9

If any of these are missing or damaged, contact your dealer immediately. If possible,

retain the carton including the original packing materials for repacking the product in

case there is a need to return it to us for repair.

Product description

Centralized Power Management for Gigabit Ethernet Networking

To fulfill the demand of higher power required PoE network applications with Gigabit

speed transmission, the industrial managed switch features high performance Gigabit

IEEE 802.3af PoE (Up to 15.4 W) and IEEE 802.3at PoE Plus (Up to 30.8 W) on all

Chapter 1: Introduction

6 NS3552-8P-2S-V2 User Manual

ports. A maximum of 30.8 W is available on each Gigabit port of the industrial managed

switch for powering per PD, with a maximum PoE delivery of 240 W for all ports in order

to satisfy the increasing needs of power consumption by PDs. Providing Gigabit

throughput and high power supply, the industrial managed switch optimizes the

installation and power management of network devices such as 11n wireless access

points (AP) with Gigabit PoE LAN port, security PTZ / Speed Dome network video

camera, large screen PoE Video phones, thin-clients, etc.

Intelligent powered device alive check

The industrial managed switch can be configured to monitor connected powered device

(PD) status in real time via a ping action. After the PD stops working and responding,

the industrial managed switch resumes the PoE port power and puts the PD back to

work. The industrial managed switch greatly enhances the network reliability through

the PoE port resetting the PD’s power source and reducing the administrator

management burden.

PoE schedule for energy saving

Under the trend of energy saving worldwide and contributing to environmental

protection, the industrial managed switch can effectively control the power supply in

addition to its capability of providing high Watt power. The “PoE schedule” function

helps you to enable or disable PoE power feeding for each PoE port during specified

time intervals, and is a powerful function to help SMBs or enterprises save power and

money.

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 7

Cost-effective IPv6 managed Gigabit switch solution for SMB

To fulfill the demand of IPv6 (Internet Protocol version 6) network infrastructure, the

industrial managed switch supports both IPv4 and IPv6 management functions. It can

work with current IPv4 network structure and also support the IPv6 network structure.

With easy and friendly management interfaces and plenty of management functions

included, the industrial managed switch is the best choice for ISP to build the IPv6

FTTx edge service and for SMB to connect with IPv6 network.

Diversity for multiple applications

The industrial managed switch is a desktop size, Layer 2 / Layer 4 full managed Gigabit

switch that can handle extremely large amounts of data in a secure topology linking to

an Enterprise backbone or high capacity network server with 20 Gbps switching fabric.

The powerful features of QoS and network security provided by the industrial managed

switch provides effective data traffic control for ISPs and Enterprise VoIP, video

streaming, and multicast applications. It is ideal for the remote access layer of campus

or enterprise networks and the aggregation layer of IP metropolitan networks.

Robust layer 2 features

The industrial managed switch can be programmed for advanced switch management

functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple

Spanning Tree Protocol (MSTP), layer 2 to layer 4 QoS, bandwidth control, and IGMP /

MLD snooping. The industrial managed switch provides 802.1Q Tagged VLAN, and a

maximum of 255 VLAN groups are allowed. Via aggregation of supporting ports, the

industrial managed switch allows the operation of a high-speed trunk combining

multiple ports. It enables maximum up to 5 groups of 10 ports for trunk and also

supports fail-over..

Enhanced security

The industrial managed switch offers comprehensive layer 2 to layer 4 access control

list (ACL) for enforcing security to the edge. It can be used to restrict to network access

by denying packets based on source and destination IP address, TCP/UDP port

number, or defined typical network applications. Its protection mechanism also

comprises 802.1x port-based and MAC-based user and device authentication. With the

private VLAN function, communication between edge ports can be prevented to ensure

Chapter 1: Introduction

8 NS3552-8P-2S-V2 User Manual

user privacy. The industrial switches also provide DHCP snooping, IP Source Guard

and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard

ARP packets with invalid MAC addresses. The network administrator can now construct

highly secured corporate networks in considerably less time and with less effort than

before.

Excellent traffic control

The industrial managed switch is loaded with powerful traffic management and QoS

features to enhance services offered by telecoms. The QoS features include wire-

speed Layer 4 traffic classifiers and bandwidth limiting that are particularly useful for

multi-tenant units, multi business units, Telco, or Network Service Provider applications.

The industrial managed switch also empowers the enterprises to take full advantage of

limited network resources and provides the best performance in VoIP and video

conferencing transmission.

Efficient and secure management

For efficient management, the industrial managed switch is equipped with console,

web, and SNMP management interfaces. With the built-in web-based management

interface, the industrial switches offers an easy-to-use, platform-independent

management and configuration facility. The industrial managed switch supports

standard Simple Network Management Protocol (SNMP) and can be managed by any

management software based on the standard SNMP v1 or v2 protocol. For text-based

management mode, the industrial managed switch can be accessed via Telnet and the

console port. Moreover, the industrial managed switch offers secure management

remotely by supporting SSH, SSL, and SNMP v3 connections where the packet content

can be encrypted at each session.

Flexible and extendable solution

The industrial managed switch features 100BASE-FX and 1000BASE-SX/LX SFP

(Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can

flexibly choose the suitable SFP transceiver according to the transmission distance or

the transmission speed required to extend the network efficiently. The distance can be

extended from 550 m to 2 km (multi-mode fiber) up to above 10/20/30/40/50/70 km

(single-mode fiber or WDM fiber). They are well suited for applications within enterprise

data centers and distributions.

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 9

Product applications

High power IP surveillance and wireless LAN service in public transportation

Having the capability of IEEE 802.3at Power over Ethernet function, the industrial

managed switch can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan,

Tilt & Zoom) network cameras, PTZ Speed Dome cameras, color touch- screen Voice

over IP (VoIP) telephones, and multi-channel wireless LAN access points. Besides the

wired Internet network, by adopting PoE Wireless LAN structure, the transportation

authority gains benefits from more efficiency and less cost while providing better high-

speed Internet services in a wider area for travelers.

Chapter 1: Introduction

10 NS3552-8P-2S-V2 User Manual

VoIP network in IP office

With a business office expansion, the additional telephones required could be installed

for lower cost via the implementation of a PoE IP telephony system rather than the

traditional circuit wiring telephony system. The industrial managed switch is backward

compatible with 802.3af and helps enterprises to create an integrated data, voice, and

powered network. IP phones and analog telephony adapters can be installed without

additional power cables because the power can be provided via the standard Ethernet

cable from the connected industrial managed switch. With the industrial managed

switch, IP Telephony deployment becomes more reliable and cost effective, which

helps enterprises save tremendous cost when upgrading from traditional telephony

systems to IP telephony communications infrastructure.

Product features

Physical port

• Eight 10/100/1000BASE-T gigabit Ethernet RJ45 ports with IEEE 802.3af / 802.3at

PoE injector.

• Two 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection.

• One RJ45 console interface for basic management and setup.

Power over Ethernet

• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet / End-Span PSE.

• Complies with IEEE 802.3af Power over Ethernet / End-Span PSE.

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 11

• Up to four ports of IEEE 802.3af/IEEE 802.3at devices powered.

• Supports PoE power up to 15.4 W or 30.8 W for each PoE port.

• Auto detects powered device (PD).

• Circuit protection prevents power interference between ports.

• Remote power feeding up to 100 m.

• PoE management:

• IEEE 802.3af and IEEE 802.3at mode switch control

• Total PoE power budget control

• Per port PoE function enable/disable

• PoE admin-mode control

• PoE port power feeding priority

• Per PoE port power limitation

• PD classification detection

• Intelligent PoE features:

• Temperature threshold control

• PoE usage threshold control

• PD alive check

• PoE schedule

• PD power recycling schedule

Industrial case and installation

• IP30 aluminum case

• DIN-rail and wall-mount design

• 48 VDC redundant power with polarity reverse protect function

• Supports 6000 VDC EFT protection for power line

• Supports Ethernet ESD protection for 6000 VDC

• -40 to 75°C operating temperature

Digital input and digital output

• Two Digital Inputs (DI)

• Two Digital Outputs (DO)

• Integrates sensors into auto alarm system

• Transfers alarm to IP network via email and SNMP trap

Layer 2 features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE

frame flow control (full-duplex).

Chapter 1: Introduction

12 NS3552-8P-2S-V2 User Manual

• High performance of Store-and-Forward architecture and runt/CRC filtering

eliminates erroneous packets to optimize the network bandwidth.

Storm control support:

• Broadcast / Multicast / Unknown-Unicast

Supports VLAN

• IEEE 802.1Q tagged VLAN

• Up to 255 VLANs groups out of 4094 VLAN IDs

• Provider bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

• Private VLAN Edge (PVE)

• Protocol-based VLAN

• MAC-based VLAN

• Voice VLAN

Supports STP

• STP, IEEE 802.1D Spanning Tree Protocol

• RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

• MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN

• BPDU Guard

Supports link aggregation

• IEEE 802.3ad Link Aggregation Control Protocol (LACP)

• Cisco ether-channel (static trunk)

• Maximum five trunk groups, up to eight ports per trunk group

• Up to 16 Gbps bandwidth (duplex mode)

Provides port mirror (many-to-1)

Port mirroring to monitor the incoming or outgoing traffic on a particular port

Loop protection to avoid broadcast loops

Supports Ethernet Ring Protection Switching (ERPS)

Quality of Service

• Ingress shaper and egress rate limit per port bandwidth control

• Eight priority queues on all switch ports

• Traffic classification:

- IEEE 802.1p CoS

- TOS / DSCP / IP Precedence of IPv4/IPv6 packets

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 13

- IP TCP/UDP port number

- Typical network application

• Strict priority and Weighted Round Robin (WRR) CoS policies

• Supports QoS and In/Out bandwidth control on each port

• Traffic-policing policies on the switch port

• DSCP remarking

Multicast

• Supports IGMP snooping v1, v2, and v3

• Supports MLD snooping v1 and v2

• Querier mode support

• IGMP snooping port filtering

• MLD snooping port filtering

• Multicast VLAN Registration (MVR) support

Security

• Authentication

− IEEE 802.1x Port-Based / MAC-Based network access authentication

− Built-in RADIUS client to co-operate with the RADIUS servers

− TACACS+ login users access authentication

− RADIUS / TACACS+ users access authentication

• IP-based Access Control List (ACL)

− MAC-based ACL

• Source MAC / IP address binding

• DHCP snooping to filter distrusted DHCP messages

• Dynamic ARP inspection discards ARP packets with invalid MAC addresses to IP

address binding.

• IP source guard prevents IP spoofing attacks.

• Auto DoS rule to defend against DoS attacks.

• IP address access management to prevent unauthorized intruders.

Management

• Switch management interfaces:

− Console / Telnet Command Line Interface

− Web switch management

− SNMP v1 and v2c switch management

Chapter 1: Introduction

14 NS3552-8P-2S-V2 User Manual

− SSH / SSL and SNMP v3 secure access

• IPv6 IP address/NTP/DNS management

• Built-in Trivial File Transfer Protocol (TFTP) client

• System maintenance

- Firmware upload/download via HTTP / TFTP

- Reset button for system reboot or reset to factory default

• Four RMON groups (history, statistics, alarms, and events)

• IPv6 IP address / NTP / DNS management and ICMPv6

• BOOTP and DHCP for IP address assignment

• DHCP relay

• DHCP Option 82

• User privilege levels control

• NTP (Network Time Protocol)

• Link Layer Discovery Protocol (LLDP) and LLDP-MED

• SFP-DDM (Digital Diagnostic Monitor)

• Smart discovery utility for deploy management

• Network diagnostic

− Cable diagnostic technology provides the mechanism to detect and report

potential cabling issues

Product specifications

Model Name

NS3552

-8P-2S-V2

Hardware Specification

s

Copper

Ports

Eight 10/100/1000BASE

-T RJ45 Auto-MDI/MDI-X ports

SFP

+ Slots

Two 1000BASE

-SX/LX/BX SFP interfaces (port 9 and port 10)

Compatible with 1000BASE

-FX SFP

Console Port

1 x RS

-232 to RJ45 serial port (115200, 8, N, 1)

Switch Architecture

Store

-and-Forward

Switch

Fabric

20

Gbps / non-blocking

Throughput

14.8

Mpps @ 64 bytes

Address Table

8

K entries, automatic source address learning and aging

Share

d Data Buffer

4 Mbits

Flow Control

IEEE 802.3x

pause frame for full-duplex

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 15

Back pressure for half-duplex

Jumbo Frame

9

K bytes

Reset Button

<

5 seconds: System reboot

>

5 seconds: Factory Default

Enclosure

IP30 aluminum case

Installation

DIN rail kit and wall

-mount kit

Connector

Removable 6

-pin terminal block for power input

Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Removable 6

-pin terminal block for DI/DO interface

Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND

Alarm

One relay output for power failure. Alarm relay current carry ability:

1A @ 24

VDC

Digital Input

Two Digital Inputs (DI)

Level 0:

-24~2.1 V (±0.1 V)

Level 1: 2.1~24 V (±0.1 V)

Input load to 24 VDC, 10 mA max.

Digital Output

Two Digital Outputs (DO)

Open collector to 24 VDC, 100 mA max.

LED

System:

Power 1 (Green)

Power 2 (Green)

Fault Alarm (Green)

Ring (Green)

Ring Owner (Green)

Per

10/100/1000T RJ45 Ports:

PoE in-use (Orange)

1000 LNK/ACT (Green)

Per SFP Interface:

100 LNK/ACT (Orange)

1000 LNK/ACT (Green)

Dimensions

152 x 107

x 72 mm

Weight

1.684 kg

Power Requirement

D

C 48 V

Power

Consumption

31.9

W / 108.78 BTU (full loading without PoE function)

306

W / 1043.46 BTU (full loading with PoE function)

ESD Protection

6K VDC

EFT Protection

6K VDC

Power over Ethernet

PoE Standard

IEEE 8

02.3af/802.3at PoE / PSE

PoE Power Supply Type

End

-span

Chapter 1: Introduction

16 NS3552-8P-2S-V2 User Manual

PoE Power Output

IEEE 802.3af

Standard

Per port 56 VDC, 350 mA. Max. 15.4 W.

IEEE 802.3at Standard

Per port 56 VDC, 590 mA. Max. 30.8 W.

Power Pin Assignment

End

-span: 1/2(-), 3/6(+)

PoE Power Budget

2

40 W maximum (depending on power input)

Max. number of Class 2

PD

8

Max. number

of Class 3

PD

8

Max. number of Class 4

PD

8

Layer 2

Functions

Basic Management

Interfaces

Console; Telnet; Web browser; SNMP v1, v2c

Secure Management

Interfaces

SSH, SSL, SNMP v3

Port

Configuration

Po

rt disable / enable

Auto

-negotiation 10/100/1000Mbps full and half duplex mode selection

Flow

control disable/enable

Bandwidth control on each port

Power saving mode control

Port Status

Display each port’s

speed duplex mode, link status, flow control status, auto-

negotiation status, trunk

status.

Port Mirroring

TX / RX / both

Many

-to-1 monitor

VLAN

802.1Q tagged

-based VLAN, up to 255 VLAN groups

Q

-in-Q tunneling

Private VLAN

Edge (PVE)

MAC

-based VLAN

Protocol

-based VLAN

Voice VLAN

MVR (Multicast VLAN Registration)

U

p to 256 VLAN groups, out of 4096 VLAN IDs

Link Aggregation

IEEE 802.3ad LACP

/static trunk

Five groups with eight

ports per trunk

QoS

Traffic classification based,

strict priority and WRR

8

-level priority for switching

–

Port number

–

802.1p priority

–

802.1Q VLAN tag

–

DSCP/ToS field in IP packet

Chapter 1: Introduction

NS3552-8P-2S-V2 User Manual 17

IGMP Snooping

IGMP (v1/v2

/v3) snooping, up to 255 multicast groups

IGMP

querier mode support

MLD Snooping

MLD (v1/v2)

snooping, up to 255 multicast groups

MLD

querier mode support

Access Control List

IP

-based ACL / MAC-based ACL

Up to

123 entries

Bandwidth Control

Per port bandwidth control

–

Ingress: 500 Kbps~1000 Mbps

–

Egress: 500 Kbps~1000 Mbps

Standards Conformance

Regulation Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC60068

-2-32 (Free fall)

IEC60068

-2-27 (Shock)

IEC60068

-2-6 (Vibration)

Standards Compliance

IEEE

802.3 10BASE-T

IEEE

802.3u 100BASE-TX/100BASE-FX

IEEE

802.3z Gigabit SX/LX

IEE

E 802.3ab Gigabit 1000T

IEEE 802.3x flow control and back pressure

IEEE 802.3ad port trunk with LACP

IEEE 802.1D

Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1s Multiple Spanning Tree Protocol

IEEE 802.1p Class of Service

IEEE 802.1Q VLAN tagging

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3af Power over Ethe

rnet

IEEE 802.3at Power over Ethernet Plus

RFC 768 UDP

RFC 793 TFTP

RFC 791 IP

RFC 792 ICMP

RFC 2068 HTTP

RFC 1112 IGMP version 1

RFC 2236 IGMP version 2

RFC 3376 IGMP version 3

RFC 2710 MLD version 1

FRC 3810 MLD version 2

SNMP MIBs

RFC 1213 MIB

-II

IF

-MIB

RFC 1493 Bridge MIB

RFC 1643 Ethernet MIB

RFC 2863 Interface MIB

Chapter 1: Introduction

18 NS3552-8P-2S-V2 User Manual

RFC 2665 Ether-Like MIB

RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)

RFC 2737 Entity MIB

RFC 2618 RADIUS Client MIB

RFC 2933 IGMP

-STD-MIB

RFC 3411 SNMP

-Frameworks-MIB

IEEE 802.1X PAE

LLDP

MAU

-MIB

Environment

Operating

Temperature:

-40 to 75°C

Relative Humidity:

5 to 95% (non-condensing)

Storage

Temperature:

-40 to 85°C

Relative Humidity:

5 to 95% (non-condensing)

Page is loading ...

Interlogix NS3552-8P-2S-V2 User manual

Interlogix NS3552-8P-2S-V2 User manual

Related papers

Other documents