Apantac HDBT-SET-14 User manual

Brand: Apantac

Model: HDBT-SET-14

Category: AV extenders

Type: User manual

Apantac HDBT-SET-14 is a 4K UHD HDBaseT extender that allows you to extend HDMI signals up to 70 meters (UHD) or 100 meters (1080p) over a single CATx cable. It supports all HDMI 2.0 features, including 4K@60Hz (4:4:4), HDCP 2.2, and HDR. The HDBT-SET-14 also supports bi-directional RS232 and IR control, making it ideal for controlling devices such as Blu-ray players and cable boxes from a remote location.

4K/UHD HDBaseT

Extenders (4K@60, 4:4:4)

with Bi-directional POE

Supports up to 70m in UHD

Support up to 100m in 1080P

HDBT-SET-14

USER MANUAL v.1.0

Overview

HDBT-SET-14 uses the HDBaseT™ technology to extend HDMI 2.0 UHD signals up to 70

meters or HDMI 1.4 1080P signals up to 100 meters over a single CATx cable. The

HDBT-SET-14 uses the BDP™ technology that support bi-directional POE to allow the

power to be inserted on either the transmitter or receiver.

Package Contents

§ 1 x HDBT-1-E-UHD-POE (Transmitter)

§ 1 x HDBT-1-R-UHD-POE (Receiver)

§ 1 x User manual

§ 1 x Power adapter DC48V with lock

§ 1 x IR Receiver

§ 1 x IR Blaster

§ 2 x mounting plates

Features

n Supports 4K@60Hz(4:4:4) up to 70 meters

n Supports 4K@24/25/30Hz(4:4:4), 4K@60Hz(4:2:0) and 1080P(12bit) up to 100 m

n Supports long reach mode - 1080P@60Hz(8bit) up to 150 meters

n Supports up to HDMI 2.0

n HDCP 1.4/2.2 compliant

n Supports 3D and CEC pass-through

n Supports RS232 bi-directional transfer

n Supports all frequency of IR control

n Supports all digital audio modes

n Supports bi-directional POE (BDP™)

Specifications

Function

HDBT-1-E-POE-UHD

HDBT-1-R-POE-UHD

HDMI Connectors

1 x HDMI Type A Female

RJ45 Connectors

1 x RJ45 for HDBaseT

RS232 Connectors

1 x DB9 Female

IR Input

1 x 3.5 mm phone jack

IR Output

1 x 3.5 mm phone jack

DIP Switch

1 x 3 pin Dip Switch

LED

1 x 4x1 LED

Max Resolution

4K/UHD@60Hz (4:4:4)

Max Distance

70 m – UHD, 100 m – 1080P, 150 m – 1080P long reach mode

Power Adapter

Locking 48V DC

Weight

500g

Dimension

152 x 115x 30 mm

FRONT VIEW (Transmitter/Receiver)

1. DIP SW

a) PIN 1 – OFF: Default

ON: F/W Upgrade Mode

b) PIN 2 – OFF: Long Reach Mode

ON: HDBaseT Mode

c) PIN 3 – OFF: Auto Mode

ON: Manual Mode

2. IR OUT – For IR blaster cable

3. IR In – For IR receiver cable

4. LED Status – Top to bottom: Power/HDCP/LINK/MODE

REAR VIEW (Transmitter/Receiver)

1. Power jack 48 DC (BDP™) – Can be inserted on either transmitter or receiver

2. HDBaseT Transmitter LINK Out or Receiver LINK In

3. HDMI Tranmsitter Input or Recevier Output

4. RS-232

Installation

1. Turn off source and display

2. Connect the HDMI cable between the source and the transmitter

3. Connect the HDMI cable between the display and the receiver

4. Connect the LAN (RJ45) cable between the transmitter and receiver

5. Connect the power to either the transmitter or the receiver

6. Power on the source and display

HDCP LED Status

• Off: No video

• Blinking: Video on, HDCP On or Off

IR Blaster Cable:

Connect the IR blaster cable to <IR OUT> port

IR Receiver Cable:

Connect the IR blaster cable to <IR OUT> port

10200 SW Allen Blvd, Suite C

Beaverton, OR 97005, USA

PHONE +1 503 968 3000

FAX +1 503 389 7921

The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac

makes no representation or warranties with respect to the accuracy or completeness of the contents of this

publication and reserves the right to make changes to specification and product descriptions at any time

without notice

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks

or registered trademarks of HDMI licensing Administration.

Apantac HDBT-SET-14 User manual

Brand: Apantac

Model: HDBT-SET-14

Category: AV extenders

Type: User manual

Download PDF

report

Apantac HDBT-SET-14 User manual

Apantac HDBT-SET-14 User manual

Related papers

Other documents