2. urban ambiance
  3. UQL4161

urban ambiance UQL4161 Installation guide

  • Hello! I've reviewed the installation instructions for the UQL4161 light fixture by urban ambiance. This document provides step-by-step guidance on how to install the fixture properly, including details on wiring and the use of tools. I understand it requires two E26 Type A bulbs and that these are not included. I am ready to answer your questions about the installation process or the fixture itself.
  • What type of bulbs are required for the fixture?
    Are the bulbs included with the fixture?
    What should I do if I find damaged or missing parts?
1of3
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture
Body
x1
D
Shade
x1
E
Stem
Assembly
x1
F
Socket Assembly
x1
G
Socket Assembly,
Stem Assembly &
Fixture Body Wiring Shade
Table of
Contents
STEP 1 STEP 3 STEP 5
Fixture Body
STEP 4
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
LightSourceToolsRequired
2BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
STEP 2
Bulbs
STEP 6
Outlet Box Screw
x2
B
Wire Connector
x3
C
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
Installation Instructions: UQL4161
www.urbanambiance.com
2of3
STEP 3
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to
mounting screws
STEP 1
www.urbanambiance.com
3of3
STEP 5
STEP 6
STEP 4
1 2
Remove Lock Screws Install Shade
www.urbanambiance.com
/