urban ambiance UQL3600 Installation guide

Type
Installation guide
1of4
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
H
Crossbar AssemblyRods&Small Loop Quick Link Ceiling Canopy Bulb
Table of
Contents
STEP 1 STEP 2 STEP 3 STEP 5 STEP 6
FixtureHeight
Adjustable22.25”to58.25”
ECeiling Canopy
x1
Quick Link
x1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 4
6”L Rod
x2
G
12”L Rod
x2
I
Small Loop
x1
F
Outlet Box Screw
x2
B
Wire Connector
x3
C
Shade
x1
J
Stem
x3
K
LightSource
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1BULBSREQUIRED
BULBSNOTINCLUDED
STEP 1
Fixture Body
Installation Instructions: UQL3600
www.urbanambiance.com
2of4
STEP 3
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
STEP 2 Optional Rods
8’ ceiling:
9’ ceiling:
10’ ceiling:
(1) 6”L rods
(1) 6”L + (1) 12”L rods
(1) 6”L + (2) 12”L rods
1 2
N
L
N
L
STEP 1
www.urbanambiance.com
3of4
STEP 4
N
L
STEP 5
1 2
Step 1
Feed the fixture wires
through the loop
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
N
L
N
L
www.urbanambiance.com
4of4
STEP 6
STEP 7
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

urban ambiance UQL3600 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI