2. TESmart
  3. TES-HMA0404A1U-USBK
TES-HMA0404A1U-USBK

TESmart TES-HMA0404A1U-USBK User manual

  • Hello! I have reviewed the user manual for the 4x4 HDMI Matrix. This manual covers how to use the device, including its ability to support high-resolution video and various audio formats. I can help you with questions about its connections, settings, and how to control it through keypad, IR or PC.
  • What audio formats are supported?
    Can I save my routing settings?
    How can I control the matrix?
USER MANUAL
ENJOY THE VIVID WORLD
4X4 HDMI Matrix
UltraHD HDR
1
Features:
Support resolution up to 3840x2160@60Hz
HDMI input/output port support PCM, Dolby AC3, DTS5.1,
DTS7.1 and DSD audio format
Smart EDID management, make it compatible with most
display devices
Matrix status could be memorized after power down,
automatically restore previous matrix status after next
power on
Support 4 configurable user preset connections
Easy to control matrix via IR receiver, panel keypad and PC
(via LAN port or RS232 port)
Support DVI-D single link sources and displays with the
use of HDMI-to-DVI adapters
HDCP2.2 compliant
Support HDR
Support L/R audio output
Packing List:
1 * 4x4 HDMI Matrix
1 * Remote control
1 * IR Receiver cable
2 * Rack-ears
1 * DC 12V Power adapter
1 * User manual
UltraHD HDR
2
UltraHD HDR
Pane Description:
ID
Name
Description
1
LCD display
Display current routing status and
system setting
2
Output selection
button
Select output channel
3
Input selection
button
Select input port
4
Function select
button
Scene/↑: Save current routing as user
preset and restore user’s preset
FUN/↓: Fast setting N to N mirrored
routing and N to all routing
Setting: Change LED time and buzzer
status
Enter: Enter user ’s setting
11
10 12 14 15
13 16 17
4
1
3
256 7
8
9
3
ID
Name
Description
5
Output status
LED indicator of output connection
status
6
Input status
LED indicator of input connection status
7
IR receiver
Receive IR remote signal
8
Power status
LED indicator of power supply
9
Power switch
Power on or off the matrix
10
DC 12V
12V DC power supply
11
HDMI input
Connect to HDMI source devices
12
L/R audio output
Connect to speaker
13
HDMI output
Connect to HDMI displays
14
Ext.IR
For extended IR receiver cable input
14
LAN port
Connect to local area network, control
matrix by TCP/IP commands
16
Service data port
Connected to USB port of PC for system
upgrade
17
RS232
Connect to RS232 connector for serial
control
UltraHD HDR
4
Connection Diagram:
DVD
RS232 cable
PC HD STB DVR
Console center
CAT 5e/6 cable
IR receiver
HD monitor
Speaker
HDMI cable
HD monitor
...
Speaker
UltraHD HDR
5
Step 1: Select output, for example ‘B’
Enter input port
??--> Output B
You will see left
indication on LCD
display
Step 2: Select Input, for example ‘3’
Output:
Input:
A B C D
13 3 4
Finally, the routing
state of output B is
changed to input 3
Output:
Input:
A B C D
1 2 34
Keypad Use:
1.Selecting sources and outputs by keypad
(1)1 to 1 switch
Initial routing status
(2)1 to all switch
Output:
Input:
A B C D
1 2 34Initial routing status
UltraHD HDR
6
Step 2: Select Input, for example ‘3’
Step 1: Press button ‘Fun ’ /↓
Enter input port
??--> All output
You will see left
indication on LCD
display
Output:
Input:
A B C D
3 3 3 3
Finally, the routing
state of output B is
changed to input 3
(3) Switch to mirrored connection
Step 1: Press button ‘Fun ’ 2 times/↓
Mirror connect?
1->A,2->B,3->C..
You will see left
indication on LCD
display
Output:
Input:
A B C D
3 3 3 3 Initial routing status
UltraHD HDR
7
Step 2: Press ‘Enter’
Output:
Input:
A B C D
1 2 34
Finally, the routing
states of all outputs
are changed to
mirrored connection
Output:
Input:
A B C D
2 2 34Initial routing status
2.Save preset routing status
Step 1: Press button ‘Scene /↑’ 2 times
Step 2: Select numbers, for
example ‘1’, then current routing
status is saved to 1
Save setting:
No: ??
You will see left
indication on LCD
display
3.Load preset routing status
UltraHD HDR
8
Output:
Input:
A B C D
2 2 34Final routing status
4.Change LED timeout
The LED indicators on front panel, including back light of the
LCD display, can be turn off after seconds of inactivity. Below
is how to change the settings:
Output:
Input:
A B C D
1 2 34Initial routing status
Step 2: Select numbers, for
example ‘1’, then the preset routing
1 will be loaded and apply to
current routing
Load setting:
No: ??
You will see left
indication on LCD
display
Step 1: Press button ‘Scene /↑’
Output:
Input:
A B C D
1 2 34Initial routing status
UltraHD HDR
9
LED timeout:
30S
LED timeout:
10S
LED timeout:
NEVER
Output:
Input:
A B C D
1 2 34
Step 1: Press button ‘Settings’
LED timeout:
NEVER
You will see left
indication on LCD
display
Step 2: Consecutively pressing
button ‘Fun/↓’ will cycle through
other options
Step 3: Once the desired time is
selected, press button ‘Enter’
UltraHD HDR
10
BEEP:
OFF
BEEP:
ON
Output:
Input:
A B C D
1 2 34
5.Mute/unmute buzzer
Output:
Input:
A B C D
1 2 34Initial routing status
Step 1: Press button ‘Settings’ two
times
BEEP:
ON
You will see left
indication on LCD
display
Step 2: Consecutively pressing
button ‘Fun/↓’ will cycle through
ON/OFF option
Step 3: Once the desired option
is selected, press button ‘Enter’
UltraHD HDR
11
(3) 1 to all switch:
(2) Switch to mirrored connection:
Press , then the routing status will be
changed to Input 1 - Output A, Input 2 -
Output B, Input 3 - Output C, Input 4 -
Output D
Press , then press / / / in input block to select
input source which you want to be displayed on all outputs
(1) 1 to 1 switch:
Step 1: Press / / / in output
block to select one of the output port you
are going to control
Step 2: Press / / / in input
block to select input source which you
want to be displayed on selected output
IR Remote Control:
UltraHD HDR
12
(4) Preset routing for scenes:
Press , then press / / / in scene block, save
current routing status to user preset memory 1/2/3/4
Press , then press / / / in scene block, load
routing status from user preset memory 1/2/3/4 and apply to
current routing.
Note: 1.For the safety request by some express
company, the remote control is not equipped
battery by default. Please install the button
battery CR2025 before using it.
2. Unspecified buttons at above are non-
functional.
UltraHD HDR
We warrant this product as free of defects in material and
workmanship for a period of one (1) year from the date of
shipment.
If during the period of warranty this product proves defective
under normal use, we will repair or replace this product,
provided that this product has not been subjected to
mechanical, electrical, or other abuse or modifications. If it
fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the
time of repair. Such repairs are warranted for six (6) months
from the day of reshipment to the buyer.
Warranty Information:
31.00.0261-V002
/