Kmart 43309368 User manual

Type
User manual
Solar Powered Light Up Foilage Presents
Assembly Diagram:
Instructions:
Assemble the present box, put the small box lid on the
small frame, big box lid on the big frame as shown on the
photo Use the plastic ties to fix the lid to frame.
String the wire lights around the outer frame of the box
Apply Small Bow Ribbon (H) to small box, and Big Bow Ribbon (I) to
big box, ensuring ribbon is on all 4 sides, crossing over on
the bottom, with bow at the top
• Assemble the solar panel
Connect A-Solar Panel B- Plastic Cylinder C-Plastic Spike
• Attach part B on to the back of solar panel A, then attach C to B by pressing firmly.
• Turn the OFF/ON switch to “ON” position. You will only need to do this once, as the
solar panel will turn the lights on and off automatically.
• Place entire unit in a sunny position where there is soft ground to enable the spike to
be pushed in easily.
Specification:
Warm White LED
50x50mm Amorphous Solar Panel
1x AAA Ni-Cd rechargeable battery 1.2V, 300mAh
Static function
IMPORTANT:
• Charge battery for at least 8 hours before first use.
• The solar light panel MUST be placed in a well-lit location for the brightness
and lighting duration.
• Put the switch on the “OFF” position when not in use or in storage.
• Use a damp cloth to clean it when there is a buildup of dust and/or dirt on the
surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT attempt to
replace any of the bulbs in the light set.
WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW
CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kmart 43309368 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI