2. Kmart
  3. 42777304
42777304

Kmart 42777304 User manual

  • Hello! I've reviewed the user manual for the anko 150 LED M/C Net Lights. This document covers assembly, operation, and important safety warnings. The product features a solar-powered multi-color LED net with static and flashing modes. I'm ready to answer your questions about it.
  • How long should I charge the battery before first use?
    Where should I place the solar panel?
    What do the F and S switch settings mean?
    Can I replace the bulbs?
    Can I replace the battery?
SOLAR POWERED
150 LED M/C NET LIGHTS
Keycode: 42777304
WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW
CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
Assemble:
• Assemble the solar panel as shown in the picture.
A-Solar Panel B-Plastic Spike
• Attach part B on to the back of solar panel A by pressing firmly
• Remove the film on the solar panel
• Switch F means Flash, S means Steady. Choose either of them to turn the light on.
You will only need to do this once, as the solar panel will turn the lights on and o
automatically.
• Place entire unit in a sunny position where there is soft ground to enable the
spike to be pushed in easily
Specification:
Multi Colour LED
2V/100mA Solar Panel
1x AA Ni-Cd rechargeable battery 1.2V, 500mAh
Static and Flashing function
IMPORTANT:
• Charge battery for at least 8 hours before first use.
• The solar light panel MUST be placed in a well-lit location for
maximum sunlight. Anything that shades the panel will aect
the brightness and lighting duration
• Put the switch on the “OFF” position when not in use or in storage.
• Use a damp cloth to clean it when there is a buildup of dust
and/or dirt on the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT
attempt to replace any of the bulbs in the light set.
/