Solar Powered 4 Star Stake Lights
Assembly Diagram:
Instructions:
• Assemble the solar panel.
• Attach part B on to the back of solar panel A, then attach C to B by pressing
firmly.
• Switch F means Flash, S means Steady. Choose either of them to turn the
light on. You will only need to do this once, as the solar panel will turn the
lights on and off automatically.
• Place entire unit in a sunny position where there is soft ground to enable the
spike to be pushed in easily.
Specification:
Multi Colour LED
50x50mm Amorphous Solar Panel
1x AAA Ni-Cd rechargeable battery 1.2V, 300mAh
Static and Flashing function
IMPORTANT:
• Charge battery for at least 8 hours before first use.
• The solar light panel MUST be placed in a well-lit location for the brightness
and lighting duration.
• Put the switch on the “OFF” position when not in use or in storage.
• Use a damp cloth to clean it when there is a buildup of dust and/or dirt on
the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT
attempt to replace any of the bulbs in the light set.
WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW
CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ANKO 43201082 Solar Powered 500 LED Multi-Coloured Icicle Lights User manual
-
ANKO 2023-08-20 Operating instructions
-
Sunforce 15 LED Solar String Light User manual
-
-
ANKO 42781271 User manual
-
ANKO B08F26DS4M User manual
-
ANKO Solar Powered Fairy Net User manual
-
ANKO 200 Operating instructions
-
ANKO Solar Powered 78LED Candy Cane User manual
-
ANKO 24 Operating instructions
