Toro Trash Bag Kit, GrandStand Mower and Z Master Riding Mower Installation guide

Type
Installation guide
FormNo.3373-399RevA
TrashBagKit
GrandStand
®
MowerandZMaster
®
RidingMower
ModelNo.117-0448
InstallationInstructions
Installthiskitoneithersideofthemachine.Installingiton
theleftsideallowsforinstallationoftheChuteGateKiton
therightside.Installingtwokits,oneontheleftside,andone
ontherightsideisoptional.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Bracket1
1
Bolt(3/8x1inch)(Selftapping)
2
InstallthebrackettoaGrandStand
Mower.
Bracket1
2
Bolt(3/8x1inch)
2
InstallthebrackettoaZMasterMower.
3
Trashbag1Installthetrashbag.
1
InstallingtheBrackettoa
Grandstand
®
Mower
Partsneededforthisprocedure:
1Bracket
2
Bolt(3/8x1inch)(Selftapping)
Procedure
Installthebrackettothesideofthemachinewith2bolts
(3/8x1inch)(Figure1).
Note:Theboltsarethreadformingbolts.Theholesdonot
requiretapping.
Figure1
1.Leftsideofmachine3.Bolt(3/8x1inch)
2.Bracket
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
InstallingtheBrackettoaZ
Master
®
Mower
Partsneededforthisprocedure:
1Bracket
2
Bolt(3/8x1inch)
Procedure
Installingthiskitontheleftsideallowsyoutoinstallthe
ChuteGateKitontherightside.
Installthebrackettothesideofthemachinewith2bolts
(3/8x1inch)(Figure2).
Figure2
1.Leftsideofmachine3.Bolt(3/8x1inch)
2.Bracket
3
InstallingtheTrashBag
Partsneededforthisprocedure:
1Trashbag
Procedure
Installthetrashbagintotheslotsinthehandleassembly
(Figure3).
Figure3
1.Trashbag
2.Slotinhandleassembly
2
  • Page 1 1
  • Page 2 2

Toro Trash Bag Kit, GrandStand Mower and Z Master Riding Mower Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI